ZyXEL Communications TDS7000 User Manual

P-660R-D Series

ADSL2+ Access Router

Quick Start Guide

Version 3.40

10/2005

P-660R-D Series Quick Start Guide

Overview

The Prestige 660R-D (P-660R-D) ADSL2+ Access Router is the ideal
device for small networks connecting to the Internet via ADSL.

See your User’s Guide for background information on all features.

1 Hardware Connections

If you prefer to see a multi-media animation of how to make hardware
connections, see the included CD.

2

P-660R-D Series Quick Start Guide

1DSL: Connect the Prestige to a telephone jack using a telephone wire.

2 LAN 10/100M: Use an Ethernet cable to connect a computer to the LAN

port for initial configuration and/or Internet access.

3POWER: Use the included power adaptor to connect the POWER

socket to an appropriate power source.

After you’ve made the connections, push in the power button to turn on the
Prestige. Look at the front panel LEDs. The PWR/SYS LED blinks while
performing system testing. The PWR/SYS LED then turns steady on if the
testing is successful. The 10/100M LED turns on if the LAN port is properly
connected.

2 Configuration for Internet Access

You may configure the Prestige for Internet access in any one of these
ways:

• Configuration Genie

• Zero Configuration

• Web Configurator Internet Access Wizard

3

P-660R-D Series Quick Start Guide

Note: Configuration genie or Zero configuration are only able to

configure the device automatically for Internet access if you are
using PPPoE, PPPoA or ENET ENCAP encapsulation with a
dynamically-assigned IP address from your ISP.

If you’re not using these Internet access settings, then use the
Web Configurator Internet Access Wizard to manually
configure the device.

You will need your Internet access information such as user name and
password if given by your ISP.

INFORMATION From ISP Encapsulation Method you are using

None RFC1483 in bridge mode with a dynamic IP address

or ENET ENCAP with a dynamic IP address

An IP address only RFC1483 in routing mode with a static IP address

A user name and password (and
an IP address)

An IP address, subnet mask and
a gateway IP address

PPPoA or PPPoE encapsulation (with a static IP
address)

ENET ENCAP with a static IP address

4

P-660R-D Series Quick Start Guide

2.1 Configuration Genie

From the included CD, click “Multimedia Auto Provisioner” (the installation
and configuration assistant) and then click “Installation Tutorial”. After you’ve
viewed the tutorial, click “Configuration Genie” at the end of the installation
tutorial or from “Multimedia Auto Provisioner” in the CD.

2.2 Zero Configuration

Launch your web browser and
navigate to any web site (for
example, www.zyxel.com). The
Prestige automatically detects
and configures your Internet connection. This may take about two minutes.

If you have a PPPoE
or PPPoA
connection, a screen
displays prompting
you to enter your
Internet account
information. Enter the
username, password
and/or service name
exactly as provided. Click Apply.

5

P-660R-D Series Quick Start Guide

2.3 Web Configurator Internet Access Wizard

2.3.1 Accessing the Web Configurator

1 Launch your web browser. Enter “192.168.1.1” as the web site address.

Note: If you do not see the next screens, then please read Section 4.1

on page 17

2 Click Login.

3 Type a new password (retype it to confirm) and click Apply. Otherwise

click Ignore. You then see the main web configurator screen.

.

6