ZyXEL P-3202H-Bb Quick Start Manual

P-3202H-Bb

G-PON VoIP IAD

Firmware v1.0
Edition 1, 09/2009

DEFAULT LOGIN DETAILS

IP Address: http://192.168.1.1
User Name admin
Password: 1234

Copyright 2009

Device Panels

POWER

ON/OFF POWER ETHERNET

PORT

PON

PHONE

1~2

ETHERNET

1~4

1~4

2

PHONE

1~2

PORT

PON

RESET

ENGLISH

Overview

This device is an Integrated Access Device (IAD) which combines high­speed fiber optic (G-PON) Internet access, a built-in switch, and Voice
over IP (VoIP) technology to allow you to use an analog telephone to
make phone calls over the Internet.

In This Guide, You Will:

• Make the hardware connections to set up your device.

• Configure your Internet access using the software built into the
device. (In some regions these settings may already be
preconfigured by your ISP.)

• Configure your VoIP settings in order to make phone calls over the
Internet using an analog phone.

3

Hardware Connections

5

1

234

1. PON: Connect the fiber optic cable from your ISP to this port.

2. ETHERNET: Use an Ethernet cable to connect a computer to one of
these ports for initial configuration and/or Internet access.

3. PHONE: Use a telephone cable (and any telephone adapter provided
with your device) to connect your telephone to the PHONE 1 port.

4. POWER: Use the power adapter provided with your device to connect

an appropriate power source to this socket.

5. Push the power switch to the on position.

4