Page 1
28/07/2016
SPARE PARTS CATALOGUE
Page 2
REF.
DESCRIPTION COMPOSITION
FOTO
Lower sheet + Base cap + Expansible (5units) + Sheet case (5units) + Drill
5mm + Drill limit + Tarainsert M6 + Lic-Z Foot + DIN 912 Screw + DIN 934
Nut + Lic Foot case (3units)
For Multifrut machines from the serial number 382240
Motor Shaft Bearing + Motor Shaft Gasket Ring
To replace in motor of machines Multifruit Led from machines with serial
number 405515
Rod fastener (2units)
Valid for all the serial numbers of Multifruit
Lock handle Lic-z
Valid for all the serial numbers of Multifruit
Multifruit Filter
Valid for all the serial numbers of Multifruit
FIlter + Grater plate + Filter drive with clip + Filter drive nut
For Multifruit machines with serial number previous to 382241 **Until finish
the stock, alternative reference S3210031:03
FIlter + Grater plate with cross + Filter drive with clip + Filter drive nut
For Multifruit machines with serial number subsequent to 382240
Filter drive with clip + Filter drive Nut
Valid for machines with serial number subsequent to 341601 and for
machines updated with kit S3210070: 00
S3210000:00
S3210001:00
S3210010:01
S3210020:01
S3210030:02
S3210040:01
S3210002:00
S3210031:03
MULTIFRUIT FILTER DRIVER
MULTIFRUIT HANDLE
MULTIFRUIT FILTER
MULTIFRUIT LOWER SHEET
MULTIFRUIT
SPARE PARTS CATALOGUE 2016
MULTIFRUIT ROD FASTENER
MULTI LED GASKET RING MOTOR
SET
MULTI ON/OFF CLEANING KIT
MULTI LED CLEANING KIT
(28/07/2016)
Pag. 2 - 10
Page 3
REF.
DESCRIPTION COMPOSITION
FOTO
MULTIFRUIT
SPARE PARTS CATALOGUE 2016
Antidripping Lic-z + Tap seal
Valid for all the serial numbers of Multifruit
Rubber support tray Lic + Plastic rivet Moss (4units) + S.steel stub Modified
(3units)
For Multifruit machines until serial number 341601 **Must be used with the
juice container S3210331:00 (with places to place the stubs of the rubber)
Rubber support tray Lic + Plastic rivet Moss (4units)
For all machines with serial number between 341601 and 405514
Rubber support tray Lic LED + Plastic rivet Moss (4units)
For all Multifruit machines from serial number 405515 **Must be used with
the driver motor S3210590:00
Motor drive reduced + Filter drive with clip + Filter drive nut
Valid for all the serial numbers of Multifruit
Safety switch + DIN 988 Washer + DIN 6798 Washer + HEX Nq C-22-0280
Nut (2uds)
Valid for all the serial numbers of Multifruit
Glass holder tray + Glass holder cover
Valid for all the serial numbers of Multifruit
Main switch 230V Lic-z + Switch sheet Lic-z + Bridge wire
For 230V Multifruit machines with serial number previous to 382241
S3210050:01
S3210060:01
S3210061:00
S3210062:00
S3210070:01
S3210090:00
S3210160:01
S3210170:00
MULTIFRUIT ANTI-DRIP
MULTIFRUIT TRAY SUPPORT
SEAL
MULTIFRUIT GLASS HOLDER SET
MULTIFRUIT v2 TRAY SUPPORT
SEAL
MULTIFRUIT 230V MAIN SWITCH
MULTIFRUIT SAFETY SWITCH
MULTI LED TRAY SUPPORT SEAL
MULTIFRUIT MOTOR DRIVER
(28/07/2016)
Pag. 3 - 10
Page 4
REF.
DESCRIPTION COMPOSITION
FOTO
MULTIFRUIT
SPARE PARTS CATALOGUE 2016
Main switch 230V Lic-z + Switch sheet Lic-z + Bridge wire
For 115V Multifruit machines with serial number previous to 382241
Foot support + DIN 125 Washer + DIN 6798A Washer + Case + DIN 439
Nut
Valid for all the serial numbers of Multifruit
20 uF Capacitor (2units)
For Multifruit machines with serial number previous to 382241
Electrical brake
For Multifruit machines with serial number previous to 382241
Base IEC fuse + DIN 7982B Screw (2units) + Fuse 5x20 10A (2units)
For Multifruit machines with serial number previous to 405515
Base IEC fuse + DIN 7982B Screw (2units) + Fuse 5x20 16A (2units)
For Multifruit machines with serial number previous to 405515
MX Foot
Valid for all the serial numbers of Multifruit
Motor 3/4 brake 115/230V + Short s.s stub (2units) + Large stub + Plastic
rivet Moss (4units) + Rubber support try
For Multifruit machines with serial number previous to 382241 **In
machines with serial number previous to 341601 also necessary
S3310331:00
S3210180:00
S3210190:01
S3210200:00
S3210210:00
S3210220:00
MULTIFRUIT IEC SOCKET BASE
230V KIT
MULTIFRUIT IEC SOCKET BASE
115V KIT
S3210221:00
S3210250:00
S3210311:00
20µF 400V CAPACITOR
MULTIFRUIT MOTOR BRAKE
MULTIFRUIT PEEL BUCKET FEET
MULTIFRUIT MOTOR 3/4HP
115/220V
MULTIFRUIT LEG SUPPORT
MULTIFRUIT 115V MAIN SWITCH
(28/07/2016)
Pag. 4 - 10
Page 5
REF.
DESCRIPTION COMPOSITION
FOTO
MULTIFRUIT
SPARE PARTS CATALOGUE 2016
S.S Juice tank Lic-z
Valid for all the serial numbers of Multifruit
Lic-z Grater plate
For Multifruit machines with serial number previous to 382241 **Until finish
the stock, alternative reference S3210420:02
Waste container + Mx feet (3units)
Valid for all the serial numbers of Multifruit
Multifruit II cover + Multifruit II pusher
Valid for all the serial numbers of Multifruit
Electronic module-motor Brushless
Only for Multifruit machines Speed Control with serial number between
382240 and 405514
Multifruit II pusher
For all Multifruit machines with serial number subsequent to 382240 and
for machines updated with the refererence S3210390:00
Mechanized grater plate modify
For all Multifruit machines with serial number subsequent to 382240
Magnetic detector + Magnetic sensor support + DIN 934 Nylon Nut (2units)
For all Multifruit machines from serial number 341601 and only for 115V
machines from serial number 416400
S3210350:00
S3210380:01
S3210390:01
S3210400:00
S3210410:00
S3210430:00
S3210420:02
MULTIFRUIT GRATER PLATE
S3210331:00
MULTIFRUIT STAINLESS STEEL
TANK
MULTIFRUIT PEEL BUCKET
MULTIFRUIT COVER + PUSHER
MULTIFRUIT MAGNETIC
DETECTOR
MULTIFRUIT ELECTRONIC BOARD
MULTIFRUIT PUSHER
MULTI LED GRATER PLATE V2
(28/07/2016)
Pag. 5 - 10
Page 6
REF.
DESCRIPTION COMPOSITION
FOTO
MULTIFRUIT
SPARE PARTS CATALOGUE 2016
Multifruit II selector
For Multifruit machines with serial number subsequent to 382240
Rotative switch + Selector + Switch sheet
Only for Multifruit Speed Control machines, with serial number between
382240 and 405514
Motor brushless with bridle CE 230V + Short S.S stub (2units) + Large S.S
stub + DIN 7991 Screw (3units)
Only for 230V Multifruit Led machines, from serial number 405515
Motor brushless with bridle UL 115V + Short S.S stub (2units) + Large S.S
stub + DIN 7991 Screw (3units)
Only for 115V Multifruit Led machines, from serial number 405515
Multifruit II Switch sheet (4 positions)
Only for Multifruit Speed Control machines, with serial number between
382240 and 405514
Multifruit LED Switch sheet (3 positions)
Only for Multifruit Led machines, from serial number 405515
Electronic module 230V motor brushless CE + Screw spacer (4units) + DIN
7985 Screw (4units) + Foam (4units)
Only for 230V Multifruit Led machines, from serial number 405515
Ventilator subassembly DC + DIN 7985 Screw M3 (4units) + Tower spacer
(4units) + Red insulated connector + Blue insulated connector
Only for Multifruit Led machines, from serial number 405515
S3210510:00
S3210520:00
S3210521:00
S3210540:00
S3210550:00
S3210470:00
S3210480:00
S3210500:00
MULTI LED MOTOR SET 230V
MULTIFRUIT ROTATIVE SWITCH
MULTI LED FAN
MULTI LED 230V ELECTRONIC
BOARD
MULTIFRUIT SELECTOR
MULTIFRUIT SWITCH SHEET
MULTIFRUIT LED SWITCH SHEET
MULTI LED MOTOR SET 115V
(28/07/2016)
Pag. 6 - 10
Page 7
REF.
DESCRIPTION COMPOSITION
FOTO
MULTIFRUIT
SPARE PARTS CATALOGUE 2016
Switch sheet + Rotative switch 3P + Selector handle + Pilot Led 2V Mini
red + RFX 81T Screw (2units) + Blue hollow toe (2units) + Blind connection
(2units)
Only for Multifruit Led machines, from serial number 405515
Switch base IEC fuse screwed + DIN 7982B Screw (2units) + Fuse 5x20
10A VDE (2units)
Only for 230V Multifruit Led machines, from serial number 405515
Switch base IEC fuse screwed + DIN 7982B Screw (2units) + Fuse 5x20
10A AF (2units)
Only for 115V Multifruit Led machines, from serial number 405515
Electronic module 115V motor brushless UL + Screw spacer (4units) + DIN
7985 Screw (4units) + Foam (4units)
Only for 115V Multifruit Led machines, from serial number 405515
Motor drive reduced + O-ring + DIN 7991 Screw
Valid for all the serial numbers of Multifruit
Graphite Left rear cover + Graphite Right rear cover + DIN 912 Screw
(10uds) + Grey Allen cap M4 (10uds)
Valid for all the serial numbers of Multifruit
Schuko 90º Power supply cable
Valid for all the serial numbers of EU Multifruit
Schuko 90º GB Power supply cable
Valid for all the serial numbers of GB Multifruit
S3210610:00
S3210611:00
S3210580:00
S3210590:00
S3210600:00
S3210560:00
S3210570:00
S3210571:00
MULTI LED IEC SOCKET BASE
115V
MULTI LED 115V ELECTRONIC
BOARD
MULTI LED ROTATIVE SELECTOR
MULTI LED IEC SOCKET BASE
230V
MULTI LED MOTOR DRIVER
MULTIFRUIT REAR COVER
MULTIFRUIT CABLE SCHUKO-IEC
MULTIFRUIT CABLE GB-IEC
(28/07/2016)
Pag. 7 - 10
Page 8
REF.
DESCRIPTION COMPOSITION
FOTO
MULTIFRUIT
SPARE PARTS CATALOGUE 2016
Schuko 90º PSE Power supply cable
Valid for all the serial numbers of JAP Multifruit
Schuko 90º AUS Power supply cable
Valid for all the serial numbers of AUS Multifruit
Schuko 90º SA Power supply cable
Valid for all the serial numbers of SA Multifruit
Schuko 90º UL Power supply cable
Valid for all the serial numbers of UL Multifruit
Left lock rod S.S + Rod fastener + Micro-switch limit + DIN 912 Screw +
DIN 6798A Washer + DIN 125 Washer (3uds) + Stainless Steel Spring +
DIN 94 Pin (3uds) + Fiber 3000V cover
For Multifruit machines with serial number previous to 423048
Left lock rod S.S + Rod spring + DIN 94 Pin + DIN 125 S.S Washer (2units)
+ Rod fastener
For Multifruit Led machines with serial number subsecuent to 423047
Right lock rod S.S + Rod fastener + DIN 125 Washer (2uds) + Stainless
Steel Spring + DIN 94 Pin (2uds) + Fiber 3000V cover
For Multifruit machines with serial number previous to 423048
Right lock rod S.S + Elastomer rod spring + Elastomer Rod top + DIN 94
Pin + DIN 125 S.S Washer (2units) + Rod fastener
For Multifruit Led machines with serial number subsecuent to 423047
S3210612:00
S3210613:00
S3210614:00
S3210615:00
S3210620:00
S3210630:00
S3210621:00
S3210631:00
MULTIFRUIT RIGHT SHORT S.S.
ROD
MULTIFRUIT CABLE PSE-IEC
MULTIFRUIT CABLE AUS-IEC
MULTIFRUIT LEFT STAINLESS
STEEL BAR
MULTIFRUIT RIGHT STAINLESS
STEEL BAR
MULTIFRUIT CABLE SA-IEC
MULTIFRUIT CABLE UL-IEC
MULTIFRUIT LEFT SHORT S.S.
ROD
(28/07/2016)
Pag. 8 - 10
Page 9
REF.
DESCRIPTION COMPOSITION
FOTO
MULTIFRUIT
SPARE PARTS CATALOGUE 2016
Power filter with sheet + Base sheet + Male fast-on terminal + DIN 965
Screw + DIN 6798A Washer + DIN 934 Nut + RFX 81T Screw
Only for Multifruit Led machines, from serial number 405515
Silent block cover (4units) + Silent block (4units)
Only for Multifruit Led machines, from serial number 405515
Wire micro - CE sheet + Wire filter - Sheet + Wire IEC - Filter + Wire IEC Filter + Wire IEC + Bridge wire micro - Filter + Sheet wire Phase - Neutral +
Selector wire + Sheet wire - Motor
Only for Multifruit Led machines, from serial number 405515
Multifruit UL Net Filter
Valid for Multifruit LED 115V with serial number subsequent to 415838
Plastic rivet (4uds)
Valid for all the serial numbers of Multifruit
Filter drive nut
Valid for all the serial numbers, assembled from serial number 423622
Short flat support (2uds) + Flat support
Valid for all serial numbers
White Base LIC + Lower sheet Kit + Right lock rod Kit + Left lock rod Kit +
Safety Micro-switch Kit
For Multifruit machines with serial number subsequent to 382240 **Spare
part sold with identification label and on request. INDISPENSABLE SEND
THE SERIAL NUMBER
S3210640:00
S3210700:00
S3210680:00
S3210650:00
S3210660:00
S3210670:00
S3211000:01 WHITE
S3210690:01
DISK-DRIVER MULTIFRUIT NUT
MULTI LED GFCI FILTER
PLASTIC RIVET MOSS
MULTI LED BASE
MULTIFRUIT JUICE CONTAINER
SUPPORTS
MULTI LED WIRE SET
MULTIFRUIT POWER FILTER
MULTIFRUIT SILENT BLOCK
(28/07/2016)
Pag. 9 - 10
Page 10
REF.
DESCRIPTION COMPOSITION
FOTO
MULTIFRUIT
SPARE PARTS CATALOGUE 2016
Silver Base LIC + Lower sheet Kit + Right lock rod Kit + Left lock rod Kit +
Safety Micro-switch Kit
For Multifruit machines with serial number subsequent to 382240 **Spare
part sold with identification label and on request. INDISPENSABLE SEND
THE SERIAL NUMBER
Black Base LIC + Lower sheet Kit + Right lock rod Kit + Left lock rod Kit +
Safety Micro-switch Kit
For Multifruit machines with serial number subsequent to 382240 **Spare
part sold with identification label and on request. INDISPENSABLE SEND
THE SERIAL NUMBER
S3211000:01
BLACK
S3211000:01
SILVER
MULTI LED BASE
MULTI LED BASE
(28/07/2016)
Pag. 10 - 10
Page 11
WARRANTY
SPARE PARTS
Page 12
WARRANTY SPARE PARTS
Thank you for purchasing an original ZUMEX spare part. We hope that our spare part will
adapt perfectly to your needs and that it will work properly and for a long time.
The ZUMEX original spare parts are the same as those used in our equipment. They are
submitted to the same quality controls as the original components installed in your
equipment, satisfying the strictest regulatory requirements to guarantee the quality and
safety of the spares.
* See the range of certied products.
The warranty terms and conditions corresponding to your purchase of an original ZUMEX
spare part are described in this document.
Basic Warranty Conditions
ZUMEX guarantees the excellent quality of the original ZUMEX spare part you have purchased
new and that it will be in good working order for 6 months as from the purchase date. This
warranty exclusively covers ZUMEX original spare parts.
Please read this document carefully and if you have any doubts, please contact us at
www.zumex.com.
What does the warranty cover?
This warranty comprises the right to replace the ZUMEX original spare part purchased new
by you from ZUMEX GROUP S.A. free of charge, if such spare should have a manufacturing
or assembly defect or operating fault, so long as this is due to a manufacturing fault that
represents a deciency in its normal operation. It shall not cover a refund of the purchase
price under any circumstances.
ZUMEX may ask you, at any time, to send the faulty part whose replacement you are requesting,
in order for ZUMEX to verify the defect. Its shipment will be a compulsory requirement for
the validity of this warranty. If it is indeed a manufacturing defect, the part will be replaced
and the costs derived from this process will be assumed by ZUMEX.
For this ZUMEX warranty to become effective, you must provide proof of the date of purchase
of the ZUMEX original spare part, via the relative purchase invoice.
zumex@zumex.com
www.zumex.com
Page 13
WARRANTY SPARE PARTS
What does the warranty not cover?
Given that ZUMEX, as manufacturer of the original spare part, cannot assume responsibility
for certain aspects not related to our activity, there are certain faults and damage that this
warranty cannot cover.
Please inspect the state of the ZUMEX original spare part purchased on delivery, and check
that it is the right one before installing it. Remember that a bad diagnosis may cause the
spare part purchased not to work correctly or the incorrect operation of the equipment.
Any aw, damage or operating deciency, caused by mistakes in selecting the spare part, by
inadequate installation or improper use of the spare part, will result in the loss of coverage
of this warranty and of the warranty of the equipment that this spare part is installed in.
If you do not send the faulty part when requested by ZUMEX to verify the defect, this warranty
will lose its validity.
In any case, the following are excluded from the coverage of this warranty:
The service provision (travel), manpower and transport concepts, which may possibly arise
•
in those cases deemed appropriate by ZUMEX.
Faults or damages caused to the spare part, not attributable to its design or
•
manufacture, but caused by external conditions, flaws caused by knocks or impacts,
da-mage due to climate conditions or other natural phenomena, as well as external
influences such as voltage and/or pressure surges.
Faults or damage to the spare part caused by improper use or use contrary to
•
the purpose defined by the manufacturer, due improper handling, to the use of
inappropriate chemical agents or washing products, to damage caused by chemical
or electrochemical effects of the water, as well as due to incorrect installation
or assembly, due to general unusual environmental conditions or to improper
maintenance of the equipment, due to failure to observe the care and cleaning tasks
according to the instructions for use.
Replacement or repair of parts affected by wear, included in the normal maintenance
•
and cleaning of the equipment; and those that the manufacturer recommends should be
replaced within a specic period of time or number of work cycles.
Replacement or repair of fragile parts (for example wedges, handles, covers, contai-ners,
•
spouts, etc.) when their fault or breakage is not attributable to a manufacturing defect.
Finally, the warranty would be cancelled if the spare part is installed in equipment in which
non-original ZUMEX parts are also installed or additional parts or accessories that are not
ZUMEX originals are used.
zumex@zumex.com
www.zumex.com
Page 14
WARRANTY SPARE PARTS
Important
To be entitled to this warranty, it will be essential to provide ZUMEX GROUP S.A. with proof of
the date of receipt of the new original ZUMEX spare part by you, by providing the purchase
invoice. Please keep the purchase invoice.
Except for the express warranties set forth above, ZUMEX grants no other warranties,
express or implied, by statute or otherwise, regarding the product, tness for any purpose or
otherwise. To the extent that permitted by the local laws, ZUMEX shall not be liable for the
any defect, inconvenience, loss or any other consequential damage, arising out of the use, or
inability to use the product or breach of any express or implied warranty.
Welcome to ZUMEX, we hope you will enjoy your products.
*Warranty terms applicable to products sold after 01/01/2014.
zumex@zumex.com
www.zumex.com
Loading...