Page 1
27/07/2016
SPARE PARTS CATALOGUE
Page 2
REF.
DESCRIPTION COMPOSITION
FOTO
Cleaning brush
Valid for all the serial numbers
MX Graphite colour Feeder door
Valid for all the serial numbers
MX counterweight
Valid for all the serial numbers
MX Graphite colour Dispenser
Valid for all the serial numbers
MX Graphite colour feeder ramp
Valid for all the serial numbers
MX Support pivot V 2.0
For machines with serial number subsequent to 333375
MX Front cover
Valid for all the serial numbers
MX Graphite colour Juice tray
For machines with serial number previous to 391809
MX JUICE TRAY
MX FEEDER DISPENSER
MX FRONTAL COVER
MX FEEDER RAMP
MX 2.0 SUPPORT PIVOT
MINEX
SPARE PARTS CATALOGUE 2016
MX FEEDER COUNTERWEIGHT
CLEANING BRUSH
MX FEEDER DOOR
S3300002:00
S3310010:00
S3310020:00
S3310030:00
S3310040:00
S3310051:00
S3310060:00
S3310070:00
(27/07/2016)
Pag. 2 - 12
Page 3
REF.
DESCRIPTION COMPOSITION
FOTO
MINEX
SPARE PARTS CATALOGUE 2016
MX Graphite colour drip tray
Valid for all the serial numbers
MX Upper plastic pressing unit
Valid for all the serial numbers
MX Support pivot shaft + DIN 6798A Washer + DIN 934 Nut + DIN 127
Washer + Support pivot V2.0
Valid for all the serial numbers
MX Support pivot shaft + DIN 439 MF Nut + DIN 127 Washer
For machines with serial number subsequent to 333375
Mx cover base + Mx feet (4units) + Din 934 Nut (4units) + DIN 7991 Screw
(4units)
Valid for all the serial numbers
Mx V 2.0 Silicone faucet O-ring
For machines with serial number previous to 391809
MX motor reducer + Connection female (2units) + Connector pin
Valid for all the serial numbers
Mx Main board + Plastic bridle + ESP Screw Heyco (2units) + RFX 81T
Screw (4units)
Valid for machines with serial number previous to 418218
MX MAIN CONTROL BOARD
MX FAUCET O-RING
MX REDUCER MOTOR
MX 2.0 SUPPORT PIVOT SHAFT
MX COVER BASE
MX UPPER PRESSING UNIT
MX SUPPORT PIVOT SHAFT
+SUPPORT PIVOT
MX DRIP TRAY
S3310110:00
S3310150:01
S3310161:00
S3310170:00
S3310211:00
S3310240:00
S3310250:00
S3310160:01
(27/07/2016)
Pag. 3 - 12
Page 4
REF.
DESCRIPTION COMPOSITION
FOTO
MINEX
SPARE PARTS CATALOGUE 2016
Mx Main board + Plastic bridle + Filter + ESP Screw Heyco (2units) + DIN
912 Screw + DIN 985 Nut + DIN 6798A Washer
For machines with serial number subsequent to 418218 ** Valid for
machines with serial number between 391808 and 418217, removing the
filter S3310740:00
MX inner drive + Mx extern drive + spring drive + DIN 934 nut + DIN 125
Washer + Silicone joint (2units)
Valid for all the serial numbers
Rotor shaft + Screw DIN 7985 + Washer DIN 125 + O-ring + Seal washer +
Bearing 6802 2RS s.s (2units) + MX Spacer + Weight adhesive
For serial numbers previous to 391809, in serial numbers previous to
333374 use the reference S3310440: 00
MX Weight + Weight adhesive
For machines with serial number previous to 391809
MX Belt weight
For machines with serial number previous to 391809
Mx Rocker arm belt
Valid for all the serial numbers
MX Rocker arm + Washer DIN 125 + RFX 81T screw
Valid for all the serial numbers
MX Graphite colour Bracket + DIN 7981B Screw (2units)
Valid for machines with serial number subsequent to 415057 ** Posibility to
use in machines with previous serial number placing the microswitch in the
lower hole.
MX FRONT COVER LOCK
BRACKET
MX ROCKER ARM BELT
MX ROCKET ARM
MX WEIGHT
MX COUNTERWEIGTH BELT
MX DISPENSER DRIVER
MX TWIRLER BLADE ROTOR
SHAFT
MX MAIN CONTROL BOARD AND
FILTER
S3310280:00
S3310290:00
S3310291:00
S3310300:01
S3310310:01
S3310251:00
S3310260:00
S3310270:00
(27/07/2016)
Pag. 4 - 12
Page 5
REF.
DESCRIPTION COMPOSITION
FOTO
MINEX
SPARE PARTS CATALOGUE 2016
MX Graphite colour Fix blade bracket + Screws DIN 7981 B (3units)
For machines with serial number subsequent to 333374, on machines with
serial number previous to 333374 use the alternative reference S3310440:
00
MX Keyboard module + Keyboard Bus
Valid for all the serial numbers
Frame + Door shaft (2units) + S.S front + Peel ejec. holder (2units) +
Expander (12units) + Kit Fix blade bracket + Kit Wire fastener + Wire
feeder arm set + Wire guide tube + GPN Plastic Plug
For serial numbers previous to 391809 **Spare part sold with identification
label and on request. INDISPENSABLE SEND THE SERIAL NUMBER
Frame + Door shaft (2units) + S.S front + Peel ejec. holder (2units) +
Expander (12units) + Kit Fix blade bracket + Kit Wire fastener + Wire
feeder arm + Wire guide tube + Grease + GPN Plastic Plug
Serial numbers subsequent to 391809 **Spare part sold with identification
label and on request. INDISPENSABLE SEND THE SERIAL NUMBER
MX Stainless Steel twirler blade
For machines with serial number subsequent to 333375
MX Twirler blade holder + MX Blade blockage
For machines with serial number subsequent to 333375
MX Plastic cover lock + Lock base + RFX 81T Screw (2units)
Suitable for machines with serial number subsequent to 333377
MX Silicone shaft fastener (2units)
Valid for all the serial numbers
MX SILICON SHAFT FASTENERS
(2uts)
MX LOCK KIT
MX BLADE HOLDER SET
MX TWIRLER BLADE
MX PLASTIC FRAME MODULE
MX PLASTIC FRAME MODULE
(SPRING)
MX TWIRLER BLADE BRACKET
MX KEYBOARD MODULE
S3310320:00
S3310330:00
S3310340:00
S3310341:00
S3310400:01
S3310410:02
S3310420:00
S3310430:00
(27/07/2016)
Pag. 5 - 12
Page 6
REF.
DESCRIPTION COMPOSITION
FOTO
MINEX
SPARE PARTS CATALOGUE 2016
MX Twirler blade holder + Stainless steel twirler blade + MX Graphite
colour Fix blade bracket + Blade blockage + Kit twirler blade rotor shaft
To update machines until serial number 333374
MX Faucet push + Push spring + Graphite colour Faucet piston + Silicone
O-ring
For machines with serial number previous to 391809
MX Keyboard cover + ON/OF Button + O-ring thread + DIN 125 Washer
(3units) + Silicone joint (3units) + RFX 81T Screw (3units)
Valid for all the serial numbers
MX Stainless Steel Wire + Setscrew + Plastic cover + Silicone joint (2units)
+ DIN 934 Nut (2units) + Retaining wire sheet + RFX 81T Screw (2units)
Valid for all the serial numbers
Mx Wire feeder-rocker arm set + Spring cover + Retaining wire + RFX 81T
Screw (2units)
For machines with serial number subsequent to 382339 *System used in
machines with problems in the continuous feeding.
MX Gear levy
Valid for all the serial numbers
MX Position module + Position module bus
Valid for all the serial numbers
MX Feeder barrier module + Feeder barrier module bus
For machines with serial number previous to 391809
MX POSITION MODULE
MX FEEDER BARRIER MODULE
MX WIRE FEEDER-ROCKER ARM
MX GEAR LEVY
MX TAP
MX KEYBOARD COVER
MX FEEDER SYSTEM
REINFORCEMENT
MX BLADE UPDATING KIT
S3310440:00
S3310450:00
S3310460:01
S3310470:00
S3310480:00
S3310490:00
S3310500:00
S3310475:00
(27/07/2016)
Pag. 6 - 12
Page 7
REF.
DESCRIPTION COMPOSITION
FOTO
MINEX
SPARE PARTS CATALOGUE 2016
Barrier board-power board BUS MX
For machines with serial number subsequent to 391809
MX Graphite colour Rear cover
Valid for all the serial numbers
Main board to Keyboard module bus
Valid for machines with serial number subsequent to 342019
Main board to Feeder barrier module bus
Valid for machines with serial number subsequent to 342019
Main board to Position module bus
Valid for machines with serial number subsequent to 342019
MX Secudity micro-switch + Pin fast-on
Valid for all the serial numbers **Placed in the lower hole of lock bracket
from serial number 415058
MX Secudity micro-switch + Pin fast-on
Valid for all the serial numbers **Placed in the upper hole of lock bracket
from serial number 423804
MX Double magnetic detector + Silicone joint + DIN 934 Nylon nut
Valid for all the serial numbers
MX SECURITY MICRO-SWITCH
MX BUS MODULE POWER-
POSITION
MX SECURITY MICRO-SWITCH
MX BUS MODULE POWER-
CONTROL
MX BUS MODULE POWER-
FEEDER BARRIER
MX PEELS DEPOSIT SENSOR
MX FEEDER BARRIER BUS
MX REAR COVER
S3310502:00
S3310510:00
S3310520:00
S3310530:00
S3310540:00
S3310550:00
S3310551:00
S3310560:00
(27/07/2016)
Pag. 7 - 12
Page 8
REF.
DESCRIPTION COMPOSITION
FOTO
MINEX
SPARE PARTS CATALOGUE 2016
Mx Twirler blade rotor + DIN 7985 + DIN 125 Washer
Valid for all the serial numbers
IEC Socket base + Fuse (2units) + Bridge wire (2units)
Valid for all the serial numbers
MX Juice container filter
Assembled in machines with serial number subsequent to 391809 and
valid for all the serial numbers.
MX V 3.0 Juice container
For machines with serial number subsequent to 391809 and valid to
update machines with serial number subsequent to 382339
Mx V 3.0 Faucet with joint
For machines with serial number subsequent to 391809 and valid to
update machines with serial number subsequent to 382339
Round jar + Rotor shaft specific grease
For machines with serial number subsequent to 391809
V 3.0 Juice in-out joint
For machines with serial number subsequent to 391809 and valid to
update machines with serial number subsequent to 382339
Rotor shaft spring + MX Belt bridle + MX weight belt + DIN 912 Screw +
DIN 6798A Washer
For machines with serial number subsequent to 391809
MX 2.0 TENSION SPRING
MX 2.0 ROTOR SHAFT GREASE
MX 2.0 FAUCET SEAL
MX 2.0 JUICE CONTAINER
MX 2.0 TAP
MX IEC SOCKET BASE
MX 2.0 JUICE CONTAINER FILTER
MX ROTOR
S3310580:00
S3310590:00
S3310620:00
S3310630:00
S3310640:00
S3310650:00
S3310660:00
S3310670:00
(27/07/2016)
Pag. 8 - 12
Page 9
REF.
DESCRIPTION COMPOSITION
FOTO
MINEX
SPARE PARTS CATALOGUE 2016
Rotor shaft MX V 3.0 + Screw DIN 7985 + Washer DIN 125 + Bearing
6802 2RS S.S (2units) + MX Bearings spacer + Rotor Shaft specific grease
For machines with serial number subsequent to 391809
ASP Upper presing unit + ASP Lower presing unit + Support pivot + Blade
block + Twirler blade holder + S.S Twirler blade + ASP Left peel ejector +
Securing knob (2units) + Silicone joint (2units) + ASP Label
For machines with serial number subsequent to 333375
MX Gear case mounting tool (2units)
This tool is used to facilitate the assembly of gear case and the fasteners in
the frame
DIN 439 Nut + DIN 125 Washer + Cable guide + Mx Feeder system
Metallic PCB + DIN 6798 Washer + DIN 934 Nut (2units) + Din 7984 Screw
(2units)
For machines with serial number subsequent to 391809
MX Foot
Valid for all the serial numbers
Mx Schuko 90º Power supply cable
Valid for all the serial numbers
Schuko 90º UL Power supply cable
Valid for all the serial numbers
Mx Schuko 90º GB Power supply cable
Valid for all the serial numbers
MX POWER SUPPLY CABLE GB
MX POWER SUPPLY CABLE UE
MX POWER SUPPLY CABLE UL
MX POSITION MODULE BRACKET
MX FOOT
MX UPDATE KIT
MX GEAR CASE MOUNTING TOOL
MX 2.0 ROTOR SHAFT
S3310680:00
S3310690:00
S3310700:00
S3310710:00
S3310720:00
S3310730:00
S3310731:00
S3310732:00
(27/07/2016)
Pag. 9 - 12
Page 10
REF.
DESCRIPTION COMPOSITION
FOTO
MINEX
SPARE PARTS CATALOGUE 2016
Schuko 90º AUS Power supply cable
Valid for all the serial numbers
Mx Main board wires and filter
Valid for machines with serial numbers previous to 417579 **For machines
with serial number between 391808 and 417578, it is not neccesary if the
electronic board S3310251:00 is installed
Full gear case + Motor + Kit lower shaft + Kit upper shaft + Eight reinforc.
Valid for all the serial numbers
Bearing 6007 2RS (2units) + MX eight support + DIN 471 E-35 seg ring
(2units) + DIN 471 E-30 seg ring (2units) + 61904 2RS Bearings (2units)
Valid for all the serial numbers
Mx Big plastic gear
Valid for all the serial numbers
Mx small plastic gear
Valid for all the serial numbers
Mx Lower plastic pressing unit
Valid for all the serial numbers
Left peel ejector
Valid for all the serial numbers
MX LEFT PEEL EJECTOR
MX SMALL PLASTIC GEAR
MX LOWER PLASTIC PRESSING
UNIT
MX SUPPORT-BEARING KIT
MX BIG PLASTIC GEAR
MX MAIN BOARD FILTER
MX GEARBOX GROUP
MX POWER SUPPLY CABLE AUS
S3310733:00
S3310740:00
S3310760:00
S3310770:00
S3310780:00
S3310790:00
S3310800:00
S3310810:00
(27/07/2016)
Pag. 10 - 12
Page 11
REF.
DESCRIPTION COMPOSITION
FOTO
MINEX
SPARE PARTS CATALOGUE 2016
Securing knob (2units) + Silicone joint (2units)
Valid for all the serial numbers
Peel ejector pivot holder (2units)
Valid for all the serial numbers
Mx SNACAP Washer (4units) + DIN 7991 Screw (4units) + Mx Black
SNAPCAP PLUG (4units) + Expansible thread DRR011 (2units)
Valid for all the serial numbers
Heyco Expander (12units)
Valid for all the serial numbers
MX B Hinge + Mx A Hinge
Valid for all the serial numbers
Mx upper pressing shaft + Bolt 10 x 8 x 25
Valid for all the serial numbers
Mx lower pressing shaft + Bolt 10 x 8 x 25
Valid for all the serial numbers
Mx weight inox front + Mx expansible thread heyco (12units)
For machines with serial number previous to 391809
MX WEIGHT INOX FRONT
MX UPPER PRESSING SHAFT
MX LOWER PRESSING SHAFT
MX FRONT COVER EXPANDER
MX PLASTIC HINGES
MX PEEL EJECTORS PIVOT
HOLDERS (2uts)
MX COMPONENTS
MX SECURING KNOBS (2uts)
S3310820:00
S3310830:00
S3310840:00
S3310841:00
S3310850:00
S3310860:00
S3310870:00
S3310880:00
(27/07/2016)
Pag. 11 - 12
Page 12
REF.
DESCRIPTION COMPOSITION
FOTO
MINEX
SPARE PARTS CATALOGUE 2016
Mx spring inox front + Mx expansible thread heyco (12units)
For machines with serial number subsecuent to 391809
Mx door shaft (2units)
Valid for all the serial numbers
Mx paralel bolt
For machines with serial number previous to 343207
Mx disc bolt
For machines with serial number subsecuent to 343207
MX Electronic box cover + Esp HEYCO Screw (4units)
For machines with serial number subsequent to 343207, or with the
gearbox reference 33.1076.000 installed
Jar MX Orange + Peel bucket MX Orange
Valid for all the serial numbers ** For the rest of colours check the
accessories catalogue
COLOR KIT ORANGE
MX DISC BOLT
MX ELECTRONIC BOX COVER
MX DOOR SHAFT (2uts)
MX PARALEL BOLT
MX SPRING INOX FRONT
S3310881:00
S3310890:00
S3310900:00
S3310901:00
S3310910:00
04919:00 ORANGE
(27/07/2016)
Pag. 12 - 12
Page 13
WARRANTY
SPARE PARTS
Page 14
WARRANTY SPARE PARTS
Thank you for purchasing an original ZUMEX spare part. We hope that our spare part will
adapt perfectly to your needs and that it will work properly and for a long time.
The ZUMEX original spare parts are the same as those used in our equipment. They are
submitted to the same quality controls as the original components installed in your
equipment, satisfying the strictest regulatory requirements to guarantee the quality and
safety of the spares.
* See the range of certied products.
The warranty terms and conditions corresponding to your purchase of an original ZUMEX
spare part are described in this document.
Basic Warranty Conditions
ZUMEX guarantees the excellent quality of the original ZUMEX spare part you have purchased
new and that it will be in good working order for 6 months as from the purchase date. This
warranty exclusively covers ZUMEX original spare parts.
Please read this document carefully and if you have any doubts, please contact us at
www.zumex.com.
What does the warranty cover?
This warranty comprises the right to replace the ZUMEX original spare part purchased new
by you from ZUMEX GROUP S.A. free of charge, if such spare should have a manufacturing
or assembly defect or operating fault, so long as this is due to a manufacturing fault that
represents a deciency in its normal operation. It shall not cover a refund of the purchase
price under any circumstances.
ZUMEX may ask you, at any time, to send the faulty part whose replacement you are requesting,
in order for ZUMEX to verify the defect. Its shipment will be a compulsory requirement for
the validity of this warranty. If it is indeed a manufacturing defect, the part will be replaced
and the costs derived from this process will be assumed by ZUMEX.
For this ZUMEX warranty to become effective, you must provide proof of the date of purchase
of the ZUMEX original spare part, via the relative purchase invoice.
zumex@zumex.com
www.zumex.com
Page 15
WARRANTY SPARE PARTS
What does the warranty not cover?
Given that ZUMEX, as manufacturer of the original spare part, cannot assume responsibility
for certain aspects not related to our activity, there are certain faults and damage that this
warranty cannot cover.
Please inspect the state of the ZUMEX original spare part purchased on delivery, and check
that it is the right one before installing it. Remember that a bad diagnosis may cause the
spare part purchased not to work correctly or the incorrect operation of the equipment.
Any aw, damage or operating deciency, caused by mistakes in selecting the spare part, by
inadequate installation or improper use of the spare part, will result in the loss of coverage
of this warranty and of the warranty of the equipment that this spare part is installed in.
If you do not send the faulty part when requested by ZUMEX to verify the defect, this warranty
will lose its validity.
In any case, the following are excluded from the coverage of this warranty:
The service provision (travel), manpower and transport concepts, which may possibly arise
•
in those cases deemed appropriate by ZUMEX.
Faults or damages caused to the spare part, not attributable to its design or
•
manufacture, but caused by external conditions, flaws caused by knocks or impacts,
da-mage due to climate conditions or other natural phenomena, as well as external
influences such as voltage and/or pressure surges.
Faults or damage to the spare part caused by improper use or use contrary to
•
the purpose defined by the manufacturer, due improper handling, to the use of
inappropriate chemical agents or washing products, to damage caused by chemical
or electrochemical effects of the water, as well as due to incorrect installation
or assembly, due to general unusual environmental conditions or to improper
maintenance of the equipment, due to failure to observe the care and cleaning tasks
according to the instructions for use.
Replacement or repair of parts affected by wear, included in the normal maintenance
•
and cleaning of the equipment; and those that the manufacturer recommends should be
replaced within a specic period of time or number of work cycles.
Replacement or repair of fragile parts (for example wedges, handles, covers, contai-ners,
•
spouts, etc.) when their fault or breakage is not attributable to a manufacturing defect.
Finally, the warranty would be cancelled if the spare part is installed in equipment in which
non-original ZUMEX parts are also installed or additional parts or accessories that are not
ZUMEX originals are used.
zumex@zumex.com
www.zumex.com
Page 16
WARRANTY SPARE PARTS
Important
To be entitled to this warranty, it will be essential to provide ZUMEX GROUP S.A. with proof of
the date of receipt of the new original ZUMEX spare part by you, by providing the purchase
invoice. Please keep the purchase invoice.
Except for the express warranties set forth above, ZUMEX grants no other warranties,
express or implied, by statute or otherwise, regarding the product, tness for any purpose or
otherwise. To the extent that permitted by the local laws, ZUMEX shall not be liable for the
any defect, inconvenience, loss or any other consequential damage, arising out of the use, or
inability to use the product or breach of any express or implied warranty.
Welcome to ZUMEX, we hope you will enjoy your products.
*Warranty terms applicable to products sold after 01/01/2014.
zumex@zumex.com
www.zumex.com
Loading...