ZTE Z3352CA Quick Start Guide

Z3352CA

Quick Start Guide

1

LEGAL INFORMATION

Copyright © 2020 ZTE CORPORATION.

All rights reserved.

No part of this publication may be quoted, reproduced,
translated or used in any form or by any means,
electronic or mechanical, including photocopying and
microfilm, without the prior written permission of ZTE
Corporation.

Notice

ZTE Corporation reserves the right to make modifications
on print errors or update specifications in this guide
without prior notice.

We offer self-service for our smart terminal device users.
Please visit the ZTE official website (at
www.ztedevices.com) for more information on
self-service and supported product models. Information
on the website takes precedence.

Visit http://www.ztedevices.com to download the user
manual. Just click Support from the home page and then
select the location, product type, and name to search for
related support information.

Disclaimer

ZTE Corporation expressly disclaims any liability for
faults and damages caused by unauthorized
modifications of the software.
Images and screenshots used in this guide may differ
from the actual product. Content in this guide may differ
from the actual product or software.

Trademarks

ZTE and the ZTE logos are trademarks of ZTE
Corporation.

Android™ is a trademark of Google LLC.
The Bluetooth® word mark and logos are registered

trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by ZTE Corporation is under license.

microSDHC Logo is a trademark of SD-3C,

LLC.
Other trademarks and trade names are those of their

respective owners.

Version No.: R1.0
Edition Time : January 2, 2020
Manual No.: 07958451xxxx

2

Front

Earpiece/

Speaker

Microphone

Getting to Know Your Phone

camera

Touch screen

3

Indicator
light

Volume key

Power key

Back camera

Headset jack

Flash

Charging/
micro-USB jack

Setting Up Your Phone

The nano-SIM card and the microSDHC card (optional,
not included) can be installed and removed while the
phone is on. Power off before installing or removing the
battery.

WARNING!

To avoid damage to the phone, do not use any other kind
of SIM cards, or any non-standard nano-SIM card cut
from a SIM card. You can get a standard nano-SIM card
from your service provider.

1. Place your finger in the slot at the lower left of the
back cover to lift and remove the cover.

4

2. Hold your nano-SIM card and microSDHC card with
the metal contacts facing down and slide them into
their respective slots.

nano-SIM card

microSDHC

3. Insert the battery, making sure the gold contacts line

card

up. Press down gently to secure.

5

4. Replace the cover over the back of the phone, and
then press down along the edges to secure. Make
sure there are no gaps.

Charging the Phone

Your phone’s battery should have enough power for the
phone to turn on, find a signal, and make a few calls. You
should fully charge the battery as soon as possible.

WARNING!

Use only ZTE-approved chargers and USB cables. The
use of unapproved accessories could damage your phone
or cause the battery to explode.

1. Connect the cable to the charging jack. Ensure that
the cable is inserted in the correct direction.

6

2. Connect the charger to a standard AC power outlet.

3. Disconnect the charger when the battery is fully
charged.

NOTE:

If the battery is extremely low, you may be unable to
power on the phone even when it is being charged. In this
case, try again after charging the phone for at least 20
minutes. Contact the customer service if you still cannot
power on the phone after prolonged charging.

Powering On/Off



Press and hold the Power key to turn on your phone.



To turn it off, press and hold the Power key to open

the options menu and touch > .

Waking Up Your Phone

Your phone automatically goes into sleep mode when it is
not in use for some time. The display is turned off to save
power and the keys are locked to prevent accidental
operations.
You can wake up the phone by turning on the display and
unlocking the keys.

1. Press the Power key to turn the screen on.

2. Swipe up on the screen.

NOTE:

7

calls while driving.

near

Turn off when asked to in hospitals and medical

If you have set an unlock pattern, a PIN or a password for
the phone, you’ll need to draw the pattern or enter the
PIN/password to unlock the screen.

Product Safety Information

Don’t make or receive phone
Never text while driving.

Keep your phone at least 15 mm away from
your body while making calls.

Small parts may cause choking.

Your phone can produce a loud sound.

To prevent possible hearing damage, do not
listen at high volume levels for long periods.
Exercise caution when holding your phone
your ear while the loudspeaker is in use.

Avoid contact with anything magnetic.

Keep away from pacemakers and other
electronic medical devices.

facilities.

Turn off when told to on aircraft and at airports.

Turn off when near explosive materials or
liquids.

Don’t use at gas stations.

Your phone may produce a bright or flashing
light.

Don’t dispose of your phone in fire.

Avoid extreme temperatures.

8

Avoid contact with liquids. Keep your phone
dry.

Do not attempt to disassemble your phone.

Only use approved accessories.

Don’t rely on your phone as a primary device
for emergency communications.

FCC RF Exposure Information (SAR)

This phone is designed and manufactured not to exceed

the emission limits for exposure to radio frequency (RF)

energy set by the Federal Communications Commission

of the United States and Industry Canada of Canada.

During SAR testing, this device was set to transmit at its

highest certified power level in all tested frequency bands,

and placed in positions that simulate RF exposure in

usage against the head with no separation, and near the

body with the separation of 15 mm. Although the SAR is

determined at the highest certified power level, the actual

SAR level of the device while operating can be well below

the maximum value. This is because the phone is

designed to operate at multiple power levels so as to use

only the power required to reach the network. In general,

the closer you are to a wireless base station antenna, the

lower the power output.

The exposure standard for wireless devices employing a

unit of measurement is known as the Specific Absorption

Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg

and 1.6 W/kg by Industry Canada.

This device is in compliance with SAR for general

population/uncontrolled exposure limits in ANSI/IEEE

C95.1-1992 and Canada RSS 102 and had been tested

in accordance with the measurement methods and

procedures specified in IEEE1528 and Canada RSS 102.

9

This device has been tested and meets the FCC and IC

RF exposure guidelines when tested with the device

directly contacted to the body.

The FCC has granted an Equipment Authorization for this

model phone with all reported SAR levels evaluated as in

compliance with the FCC RF exposure guidelines. SAR

information on this model phone is on file with the FCC

and can be found under the Display Grant section of

www.fcc.gov/oet/ea/fccid after searching on FCC ID:

SRQ-Z3352CA.

For this device, the highest reported SAR value for usage

against the head is 1.13 W/kg and for usage near the

body is 1.15 W/kg.

While there may be differences between the SAR levels

of various phones and at various positions, they all meet

the government requirements.

SAR compliance for body-worn operation is based on a

separation distance of 15 mm between the unit and the

human body. Carry this device at least 15 mm away from

your body to ensure RF exposure level compliant or

lower to the reported level. To support body-worn

operation, choose the belt clips or holsters, which do not

contain metallic components, to maintain a separation of

10 mm between this device and your body.

RF exposure compliance with any body-worn accessory,

which contains metal, was not tested and certified, and

using such body-worn accessory should be avoided.

ISED Notice

This device complies with Industry Canada

license-exempt RSS standard(s). Operation is subject to

the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including

interference that may cause undesired operation of the

10

device.

Le présent appareil est conforme aux CNR Innovation,

Sciences et Développement économique Canada

applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions

suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est

susceptible d'en

CAN ICES-3 (B)/NMB-3(B)

This Class B digital apparatus complies with Canadian

ICES-003.

IC: 5200E-Z3352CA

IC Radiation Exposure Statement

This EUT is in compliance with SAR for general

population/uncontrolled exposure limits in IC RSS-102

and had been tested in accordance with the

measurement methods and procedures specified in IEEE

1528 and IEC 62209. This equipment should be installed

and operated with minimum distance of 1.5 cm between

the radiator and your body.

This device and its antenna(s) must not be co-located or

operating in conjunction with any other antenna or

transmitter.

Cet appareil est conforme aux limites d'exposition DAS

incontrôlée pour la population générale de la norme

CNR-102 d'Industrie Canada et a été testé en conformité

avec les méthodes de mesure et procédures spécifiées

dans IEEE 1528 et IEC 62209. Cet appareil doit être

installé et utilisé avec une distance minimale de 1.5 cm

entre l’émetteur et votre corps. Cet appareil et sa ou ses

11

antennes ne doivent pas être co-localisés ou fonctionner

en conjonction avec tout autre antenne ou transmetteur.

Hearing aid compatibility
(HAC) regulations for mobile
phones

In 2003, the FCC adopted rules to make digital wireless
telephones compatible with hearing aids and cochlear
implants. Although analog wireless phones do not usually
cause interference with hearing aids or cochlear implants,
digital wireless phones sometimes do because of
electromagnetic energy emitted by the phone's antenna,
backlight, or other components. Your phone is compliant
with FCC HAC regulations (ANSI C63.19- 2011). While
some wireless phones are used near some hearing
devices (hearing aids and cochlear implants), users may
detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this
interference noise and phones also vary in the amount of
interference they generate. The wireless telephone
industry has developed a rating system for wireless
phones to assist hearing device users in finding phones
that may be compatible with their hearing devices. Not all
phones have been rated. Phones that are rated have the
rating on their box or a label located on the box. The
ratings are not guarantees. Results will vary depending
on the user's hearing device and hearing loss. If your
hearing device happens to be vulnerable to interference,
you may not be able to use a rated phone successfully.
Trying out the phone with your hearing device is the best
way to evaluate it for your personal needs.

This phone has been tested and rated for use with
hearing aids for some of the wireless technologies that it
uses. However, there may be some newer wireless
technologies used in this phone that have not been
tested yet for use with hearing aids. It is important to try
the different features of this phone thoroughly and in
different locations, using your hearing aid or cochlear
implant, to determine if you hear any interfering noise.
Consult your service provider or the manufacturer of this
phone for information on hearing aid compatibility. If you

12

have questions about return or exchange policies,
consult your service provider or phone retailer.

M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less interference
to hearing devices than phones that are not labeled. M4
is the better/higher of the two ratings.

T-Ratings: Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with a
hearing device’s telecoil (“T Switch” or “Telephone
Switch”) than unrated phones. T4 is the better/higher of
the two ratings. (Note that not all hearing devices have
telecoils in them.)

Your phone meets the M3/T3 level rating.

Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help
you find this rating. For more information about FCC
Hearing Aid Compatibility, please go to
http://www.fcc.gov/cgb/dro.

13