ZTE V72M User Manual

ZTE V72M

Quick User Guide

1

Volume Key

Power/Lock Key

Status LED

Charging /

USB Jack

Charging Contactor

Getting to Know Your Tablet

2

Tablet Setup

Wall mount and Sleeve installation
guide （Optional）

1. Paste the location drawing

3

2. Hole on the wall

3. Remove the location drawing and install the plug

4

4. Install the cables in the charging base

5. Fix the charging base to the wall with crews

5

6. Connect the cables to the power adapter

Charging

When you first get your new tablet you’ll need to charge the
battery.

If the battery is low, there will be a pop-up message on the screen.
As you charge your tablet, the screen will tell you the exact battery
level each time you wake up your tablet.

6

WARNING! Use only ZTE-approved chargers and cables. The use
of unapproved accessories could damage your tablet or cause the
battery to explode.

1. Connect the adapter to the charging jack. Ensure that the
adapter is inserted with the correct orientation. Do not force the
connector into the charging jack.

2. Connect the charger to a standard AC wall outlet.

3. Disconnect the charger when the battery is fully charged.

7

Powering On/Off

 Press and hold the Power Key to turn on your tablet.
 To turn it off, press and hold the Power Key to open the

options menu.

 Touch Power off > OK.

Touch Screen

• Use your fingertip to lightly touch the screen.

• Use quick flicks of your finger on the touch screen to swipe up,

down, left, and right.

8