Insert and Extract UIM Card .............................................................................................................. 4
Remove and Install the Battery ......................................................................................................... 4
Charge the Battery .............................................................................................................................. 5
Power on/ off Your Phone .................................................................................................................. 5
Make and Answer a Call ................................................. ............................................................ ....... 6
Menu Tree ............. ........................ ........................ ........................ ........................ ................. .............. 6
Voice Mail ...................................... ..................................................................... 错误!未定义书签。
Text Input .............................................................................................................................................. 7
LP: To “hold” the key (keep pressing the key for two second or more).
2
Key Instruction
Key Function Description
Send key:
Make or answer a call.
Press Send key in standby mode to enter all recent calls list.
End key:
End an active call or reject a call.
Long press to Power on/Power off.
Exit from any interface to standby mode.
Left select key:
Enter Main menu in standby mode.
Switch to the options of left bottom submenu.
Right select key:
Enter Contacts in standby mode.
Switch to the options of right bottom submenu.
Cancel operation, exit to previous window.
Clear key:
Erase character(s) while editing text.
OK key:
Enter Main menu in standby mode.
Press OK key to confirm the commands and options selected.
Confirm the character chosen while character inputting.
Up/Down key.
Scroll the cursor up and down.
Used as selection key up and down for keying in commands and selecting
options shown on the display.
In standby mode, press Down key to write message (default).
In standby mode, press Up key to enter Profile menu (default).
Or press the scroll key to utilize the function set in Settings.
Used as direction key in games.
Left /Right key:
Scroll the cursor left and right.
Used as selection key to scroll cursor left and right for keying in commands
and selecting options shown on the display.
In standby mode, press Left key to enter Games menu(default).
Press Right key to listen to the radio(default).
Or press the scroll key to utilize the function set in Settings.
Adjust volume in conversation.
Used as direction key in games.
0~9 key:
~
Key in numbers or characters.
Make a Speed Dial call.
Hold 0 key to input + in standby mode.
# key:
Hold # key in standby mode to enable/disable vibration.
Press # key to select text mode when edit text.
* key:
Hold * key in standby mode to lock phone’s keypad.
Press * key once to enter Symbols mode in text input mode.
3
Interface Icons
Icon Indication
Signal strength
Roaming
New message
Vibration
Silence all
Vibrate+Ring
Alarm
Earphone
Power indicator
Insert and Extract UIM Card
Power off the phone, remove
the battery and other external
power.
Insert UIM card into UIM card
slot in the phone, or remove
UIM card out of slot, as shown
in picture hereinafter.
Remove and Install the Battery
The attached Li-ion battery along with the phone can be used after unpacking. For the first three times, please
use up the power and charge it fully for a new battery to perform well.
Remove: (1) Press and push the back-cover of the phone down to release and remove it off the phone. (2) Put
finger on the side/top/bottom finger grips, and then lift up the battery from the finger grips to remove the battery.
4
Loading...
+ 10 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.