G2802
GSM Mobile Phone
User Guide
Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved.
Trademarks and Permissions
, 
, and 
are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective owners.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Features marked with "optional" are optional. These features may vary according to service providers. For details, contact your service provider.
1 Getting to Know Your Phone
Your Phone
The following figure shows the appearance of your phone and is provided for your reference only.
1 |
|
|
2 |
|
|
3 |
12 |
|
4 |
||
|
||
5 |
11 |
|
6 |
10 |
|
|
7
9
8
1
1 |
Earpiece |
7 |
Microphone |
2 |
Charger/Headset |
8 |
Torch |
3 |
Screen |
9 |
Number keys |
4 |
Navigation keys |
10 |
End/Power key |
5 |
Left soft key |
11 |
Right soft key |
6 |
Call/Answer key |
12 |
Confirm key |
Keys and Functions
Press … |
To … |
||
|
|
|
z Make a call. |
|
|
|
|
z Answer an incoming call.
zView call logs in standby mode.
zPower the phone on or off (press and hold the key for about 3 seconds).
z End or reject a call.
z Return to standby mode.
Select the option displayed in the lower left corner of the screen.
Select the option displayed in the lower right corner of the screen.
zAccess the main menu in standby mode.
zConfirm a selection.
2
Press … |
To … |
zAccess the functions assigned to the navigation keys in standby mode.
zCustomize the functions assigned to the navigation keys, select Menu > Settings >
Phone settings > Direction key setup.
zEnter numbers, letters, and symbols.
zCall voicemail in standby mode (press and hold
the 1 key for about 3 seconds).
– z Speed-dial phone numbers in standby mode
(press and hold the 2–9 keys for about 3 seconds).
zSelect an option labeled with the corresponding number.
zEnter * (press the key once), + (press the key
twice), P (press the key three times), and W (press the key four times) in standby mode.
z Display the symbol list in editing mode.
zTurn the torch on or off in standby mode (press and hold the key for about 3 seconds).
zEnter #.
z Switch between text input methods in editing mode.
zLock the keypad in standby mode (press and hold the key for about 3 seconds).
3
Screen Icons
Icon |
Indicates … |
|
Signal strength. |
|
|
|
General Packet Radio Service (GPRS) signal. |
|
|
|
The alert type is Ring only. |
|
|
|
The alert type is Vib. only. |
|
|
|
The alert type is Vib. and ring. |
|
|
|
The alert type is Vib. then ring |
|
|
|
The alert type is Silence. |
|
|
|
The earphone is plugged (Optional). |
|
|
|
Missed calls. |
|
|
|
Call forwarding enabled. |
|
|
|
New text messages. |
|
|
|
New multimedia messages. |
|
|
|
Alarms activated. |
|
|
|
Keypad locked. |
|
|
|
Battery level. |
|
|
|
4 |
2 Getting Started
Installing the SIM Card and the Battery
When installing a SIM card, ensure that the gold contact area faces down, and that the beveled edge of the SIM card aligns with that of the SIM card slot.
Before removing the battery and the SIM card, ensure that your phone is powered off.
Installing a microSD Card
5
Charging the Battery
1.Connect the charger to an AC power socket.
2.Connect the charger to the phone's charger jack.
3.Wait until the battery is fully charged.
While the battery is charging, the charging icon blinks. When the charging icon stops blinking, the battery is fully charged.
When you charge a completely exhausted battery, the charging icon may appear several minutes later.
4.Disconnect the charger from the phone.
5.Disconnect the charger from the AC power socket.
Phone Lock
The phone lock protects your phone from unauthorized use. By default, the phone lock is disabled. You can change the preset phone unlock code (1234) to any number of four to eight digits.
If you forget the phone unlock code, contact your service provider.
PIN and PUK
The personal identification number (PIN) protects your SIM card from unauthorized use. The PIN unblocking key (PUK) unlocks a blocked PIN. Both the PIN and the PUK are provided with the SIM card. For details, contact your service provider.
If you enter the incorrect PIN a specified number of times, the phone prompts you to enter the PUK.
6
If you enter the incorrect PUK a specified number of times, the SIM card will become permanently invalid. If this occurs, contact your service provider for a new SIM card.
Locking and Unlocking the Keypad
To lock the keypad, press and hold 
for about 3 seconds
in standby mode. To unlock the keypad, press 
(Unlock) then 
in quick succession.
If the Auto keypad lock function is enabled, the phone will lock the keypad automatically after being idle in standby mode for a pre-defined period.
When the keypad is locked, you can press 
to answer a call or make an emergency call.
3 Voice Services
Making a Call
1. In standby mode, enter a phone number.
zTo make an international call, press 
twice to enter the plus sign (+). Then enter the country code or region code, area code, and phone number.
7
Loading...