Page 1
CDMA2000 1X Wireless Data Terminal User Guide
CDMA2000 1X
Wireless Data Terminal
User Guide
This User Guide is used for Wireless Data Terminal of AC8720.
ZTE Corporation http://www.zte.com.cn
Page 2
CDMA2000 1X Wireless Data Terminal User Guide
Copyright Statement
Copyright © 2009 by ZTE Corporation
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
ZTE Corporation reserves the right to make modifications on print errors or update specifications
in this manual without prior notice.
ZTE Corporation http://www.zte.com.cn
Page 3
CDMA2000 1X Wireless Data Terminal User Guide
Table of Contents
1. Introduction.............................................................................................................................1
2. Precautions..............................................................................................................................1
3. Appearance .............................................................................................................................2
3.1 Introduction.........................................................................................................................2
3.2 Insert R-UIM Card ..............................................................................................................2
3.3 Operation Guide of Data Cable...........................................................................................3
4. Install and Uninstall................................................................................................................4
4.1 System Requirements..........................................................................................................4
4.2 Installation Guide...............................................................................................................4
4.3 Uninstall..............................................................................................................................4
5. Run the Application................................................................................................................5
6. Connect/Disconnect................................................................................................................6
7. Connection Records................................................................................................................7
8. Voice Call...................................................................................................................................7
9. Call History ...............................................................................................................................9
10. Short Message..........................................................................................................................9
11. Phone Book............................................................................................................................10
12. Setting.................................................................................................................................... 11
13. Help .......................................................................................................................................13
14. Connect to the Website ..........................................................................................................13
15. RF Exposure Information (SAR)...........................................................................................13
16. Trouble-shooting....................................................................................................................14
17. FCC Regulations....................................................................................................................16
ZTE Corporation http://www.zte.com.cn
Page 4
CDMA2000 1X Wireless Data Terminal User Guide
1. Introduction
Thank you for choosing AC8720 CDMA2000 1X Wireless Data Terminal (hereinafter referred to as Data
Terminal) of ZTE Corporation.
Data Terminal equips with a standard USB interface and supports CDMA2000 1X network. In the area where
The
there is signal, it allows you to go surfing on the Internet, send
calls.
The Data Terminal adopts two designing options: R-UIM and Built-in UIM, which make your operation more
flexible.
The pictures in this guide are only used to demonstrate your Data Terminal’s functions, so they are maybe
different from what you see on your Data Terminal. Please refer to your Data Terminal if they are differences.
& receive short messages, and make & receive phone
2. Precautions
z Use the original accessories or those authenticated by the manufacturer. Using any unauthenticated
accessories may affect the data terminal’s performance, violate the warranty provisions or relevant national
regulations about telecom terminals, or even cause body injury.
z Do not disassemble, modify, frequently pull/plug the antenna, stretch, rotate or bend the antenna with great
force.
z Before pulling out the data terminal, please use Windows safely removing the hardware and make sure to exit
the application. Do not directly pull out the terminal to avoid the damage of data terminal or the influence on
the normal operation of operating system.
z Do not forcefully plug/pull the data terminal to avoid the damage of connector.
z Do not use your data terminal near weak signal or high-precision electronic devices. Radio wave interference
may cause misoperation of electronic devices or other problems.
z Turn off your data terminal on airplane where it’s forbidden to use it. The data terminal may affect the normal
operation of electronic devices, therefore please follow the relevant regulations when using your mobile
phone on airplane.
z Turn off your data terminal in hospital where it’s forbidden to use it. The data terminal may affect the normal
operation of medical apparatus, therefore please follow the relevant regulations when using your mobile
phone in hospital.
z Please do not use the data terminal near flammable or explosive materials; otherwise it might cause failure or
fire.
z Keep your data terminal away from water. This may cause overheating or failure if water or any other kind of
liquid enters your mobile phone. Please do not use your data terminal near high temperature, damp or dusty
place.
z Keep your data terminal away from children to avoid shock, plunge or impact. It may cause body injury when
the data terminal is used as a toy.
ZTE Corporation 1 http://www.zte.com.cn
Page 5
CDMA2000 1X Wireless Data Terminal User Guide
3. Appearance
3.1 Introduction
3.2 Insert R-UIM Card
Note: If your data terminal doesn’t need R-UIM card, please skip this section.
1. Pull out the tap；
2. Take out the R-UIM card cover in the direction indicated by the arrow；
ZTE Corporation 2 http://www.zte.com.cn
Page 6
CDMA2000 1X Wireless Data Terminal User Guide
3. Insert R-UIM card as below figure；
4. Push back R-UIM card cover .
3.3 Operation Guide of Data Cable
Generally, the Data Terminal could be directly connected with USB port. You could also connect the Data
Terminal with PC by using the accompanying data cable, as shown in the following figure. Connect Interface ①
with Data Terminal, and interface ② with PC's USB port. If the power supply from USB port is insufficient,
connect both interface ② and ③ with USB port together.
ZTE Corporation 3 http://www.zte.com.cn
Page 7
CDMA2000 1X Wireless Data Terminal User Guide
4. Install and Uninstall
4.1 System Requirements
The Data Terminal supports the following operating system:
¾ Windows 2000
¾ Windows XP
¾ Windows Vista
PC minimum configurations:
CPU Pentium-II/233MHz
USB interface
Optical Drive CD-ROM (for installation only)
Memory 64 MB
Disk Space 50 MB (used for installation of application)
2.0 (USB1.0 and 1.1 compatible)
4.2 Installation Guide
Take Windows XP as an example.
1. Please connect Data Terminal to PC through USB interface. You could also use data cable to connect.
2. The installation will automatically start. Please follow installation wizard.
3. The system will automatically find new hardware and install the driver. Wait for a while. Click "Finish"
to complete installation.
4.3 Uninstall
1. Select Start Programs (Appropriate Uninstall), and you will be asked if you want to remove
the program. Click “Yes” to uninstall.
2. Please wait and then click “OK” to complete uninstall.
ZTE Corporation 4 http://www.zte.com.cn
Page 8
CDMA2000 1X Wireless Data Terminal User Guide
5. Run the Application
After the application is installed successfully, the application icon will appear on your desktop. Double-click this
icon or select from Start -> Programs ->(Appropriate Application). Run the application to display the user
interface.
The icons on the interface are used to access the function, which indicate as below:
Connect / Disconnect
Voice Call
Short Message
Connection Record
Call History
Help
Status Bar:
1X indication
Signal strength indication. The
more bars there are, the
stronger signals are.
Open URL
Phone Book
Setting
Call indication
Missed call indication
CDMA network unavailable
Connection indication
Sleep indication
Roaming indication
Unread message indication
Inbox full indication
No R-UIM card inserted indication
R-UIM card inserted indication
Note:
Some features like Voice Call, Call History, Short Message, and Phone Book may not be supported
by your Data Terminal; the corresponding icons will not appear in the main window.
ZTE Corporation 5 http://www.zte.com.cn
Page 9
CDMA2000 1X Wireless Data Terminal User Guide
6. Connect/Disconnect
Connect
Click icon to set the relevant parameters. For details, please refer to Chapter 12 “Setting” for
details.
Click
icon at the left-up corner of the interface.
After connecting to Internet, the current network information will appear on the interface. Double-click
any place in the display area to view the connection drawing.
Please connect the Data Terminal and PC with USB extension cable under weak signal to obtain the
optimal performance. If necessary, adjust the Data Terminal's position and the antenna's direction.
Disconnect
After connecting to Internet, click the rotating icon
at the left-up corner of the interface.
ZTE Corporation 6 http://www.zte.com.cn
Page 10
CDMA2000 1X Wireless Data Terminal User Guide
7. Connection Records
Click
including Start at, Duration and Transmit bytes, which will help you know the status easily.
By switching among “List”, “Monthly” and “Statistic”, you could inquire the records every time, by month or by
time.
Note:
The relevant information contained in connection records are just for user’s reference rather than the charging
basis.
Delete Connection Records
Click
Clear Connection Records
Click
Note: If your data terminal doesn’t support Voice Call, Call History, Short Message, and Phone
Book features, please skip 8-11 sections.
icon to view connection records. Connection records save the previous relevant information
button to delete the records you have selected on the interface.
button to delete all the records.
8. Voice Call
Click to enter voice call interface.
Make a call
Click the digits in the right side of the interface, or input the digits directly from keyboard. Press
button or press “Backspace” to delete the previous input digit; press
clear all the inputs.
Click
Receive a call
When there is an incoming call, your computer will alert and the incoming caller ID will appear on the
interface.
Click
button in the right side of the interface or press “Enter” to make a call.
button in the right side of the interface or press “Enter” to receive the call.
button or press “Esc” to
Press
ZTE Corporation 7 http://www.zte.com.cn
button or press “Esc” to reject the call.
Page 11
CDMA2000 1X Wireless Data Terminal User Guide
Redial the latest outgoing call
Click
button in the right side of the interface.
Call Waiting
During a call, you could select to answer the second incoming call, and then you could switch between the two
incoming calls.
Please firstly apply for this service from your local telecom operator.
During a call, if there is a new incoming call, a pop-up window will prompt you that you have the second
incoming call.
If you select to answer, please click “Accept waiting call” button. The previous call won’t be ended, but
temporarily paused.
You could switch between two incoming calls by clicking “Switch call”.
Three-way Call
This function allows for the call among three parties. Please firstly apply for this service from your local telecom
operator.
Note:
You need set “Show 3 way call button during calling”. Please perform the setting according to chapter 12.
You could click “Dial second call” button during a call, input the third-party number in the pop-up
window, and then press “OK” button to call the third party. In this case, the original call won’t be ended,
but temporarily paused.
If the third party answers the call, click “Start conference” to enter the conference call.
During three-way conference call, click “Hangup second call” button to end the conference call, and
return to the original call.
ZTE Corporation 8 http://www.zte.com.cn
Page 12
CDMA2000 1X Wireless Data Terminal User Guide
9. Call History
Click icon to view the call history. The outgoing/incoming calls are saved in call history, including
missed calls; incoming calls, outgoing calls, and talk duration. You could select the type you want to view.
Missed/Accepted/Called Calls
Click
Click
Click
Click
Click
Statistic
Click
button to send a short message to this number.
10. Short Message
button to delete your selected record.
button to delete all records in Missed/Incoming/Outgoing catalog.
button to dial the number.
button to save this number to the phone book.
button to clear the talk duration.
Click icon to enter Short message interface.
Send a Message
Input the text to send，or click
Input the recipient’s number or click
Add more recipients if you like.
Select priority.
Click
Click
The received messages will be saved in the Data Terminal In-box. After the Data Terminal In-box is full, the
system will automatically move the messages in the Data Terminal In-box to the PC In-box, and clean out the
Data Terminal In-box.
You could copy the messages from the Data Terminal In-box to PC In-box by selecting Copy or Copy All; you
ZTE Corporation 9 http://www.zte.com.cn
button to send a message.
button to save the text into outbox.
button to select the preset message to send.
button to select the recipient from phone book.
Page 13
CDMA2000 1X Wireless Data Terminal User Guide
could also copy the messages from PC In-box to the Data Terminal In-box by selecting Copy.
The sent messages and unsent but saved messages will be all saved in the Out-box.
Take Data Terminal In-box as an example:
Reply
Click
to reply to the sender.
Forward
Click
to forward this message to other recipients.
Dial Sender’s Number
Click
to dial the sender’s phone number.
Save Sender’s Number
Click
Delete
Click
to delete your selected records.
Clear
Click
to delete all the records in the inbox.
Copy
Click
to copy your selected record into PC.
Copy All
Click
to copy all the records from the data terminal to PC.
to save the sender’s number into phone book.
11. Phone Book
Click to view the Phone book. You could select to save the contacts either in the PC(computer)、Normal
（data terminal）、R-UIM Card（If your data terminal needs R-UIM card） or in the Emergent. Click the pull-down
menu to select the storage location.
Add
Click
Modify
Click then modify the contents and select “OK” to modify the contact information.
Dial from the phone book
Click
Send messages from the phone book
then input the contents and select “OK” to add a new contact.
to dial your selected phone number.
ZTE Corporation 10 http://www.zte.com.cn
Page 14
CDMA2000 1X Wireless Data Terminal User Guide
Click to compose the text. You could send the message to multiple recipients.
Search for contacts
Click to search for the contacts by name or number.
Delete
Click to delete your selected contact.
Delete All
Click to delete all the contacts.
Copy
Click to copy your selected contacts to other storage location.
Copy All
Click to copy all contacts to other storage location.
12. Setting
Click to enter the setting interface.
Network Connection Setting
Set up the relevant parameters, work mode on the “Network” interface.
After the setting, click “Apply” button to save the settings on the current interface.
Click “Default” button and then “Apply” button to restore the settings on the current interface to factory
default.
Note:
The default network setup parameters are as below. Different regions may have different network setup
parameters, so please consult your local telecom operator.
Phone: #777
User: card
Password: card
Other Setting:
ZTE Corporation 11 http://www.zte.com.cn
Page 15
CDMA2000 1X Wireless Data Terminal User Guide
Click “Options” to switch the interface, and you could set URL and select the skin, language, etc. If you
want to use conference call, please select “Show 3 way call button during calling”;
After the setting, click “Apply” button to save the settings on the current interface.
Click “Change Password” button to set lock device. The password is required when you start the
application. The setting has nothing to do with "Default" button.
If your data terminal needs R-UIM card, please click the button “Enable Pin”. PIN code is needed when
the application is started. The setting has nothing to do with "Default" button.
Click “Default” button and then “Apply” button to restore the settings on the current interface to factory
default.
Select ring tone
After clicking “Ring”, you could set different ring tones for Call coming, New message, Call connected,
Call disconnected and Waiting call.
After the setting, click “Apply” button to save the settings on the current interface.
Click “Default” button and then “Apply” button to restore the settings on the current interface to factory
default.
Supplementary Services
After clicking “Service”, you could set “Unconditional forwarding”, “Busy Forwarding”, “No answer
forwarding”, “Call waiting”, etc. Double-click the selected option to modify the service number and
forwarding number.
After the setting, click
button to send the corresponding request to the network system.
After the setting, click “Apply” button to save the settings on the current interface.
Click “Default” button and then “Apply” button to restore the settings on the current interface to factory
default.
ZTE Corporation 12 http://www.zte.com.cn
Page 16
CDMA2000 1X Wireless Data Terminal User Guide
13. Help
Click button to view the help file.
Click “Help” button to view the relevant help file; click “Online service” to enter our company’s
website.
You could view the software version information under “About”.
14. Connect to the Website
Click button to directly connect the website you set. For details on the website setting, please refer to
Chapter 12 “Setting”.
15. RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves.
This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate,
*
or SAR. The SAR limit set by the FCC is 1.6W/kg.
positions accepted by the FCC with the device transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of
the phone while operating can be well below the maximum value. This is because the device is designed to
operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power output.
The highest SAR value for the device as reported to the FCC when tested for body, as described in this user guide,
is 0.895 W/kg for CDMA 850 band.
While there may be differences between the SAR levels of various phones and at various positions, they all meet
the government requirement.
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and
can be found under the Display Grant section of http://www.fcc.gov/oet/fccid
Q78-AC8720.
Tests for SAR are conducted using standard operating
after searching on FCC ID:
For body operation, this device has been tested and meets the FCC RF exposure guidelines for use the positions
the device a minimum of 0.5cm from the body. Use of other enhancements may not ensure compliance with
FCC RF exposure guidelines.
ZTE Corporation 13 http://www.zte.com.cn
Page 17
CDMA2000 1X Wireless Data Terminal User Guide
16. Trouble-shooting
Failures Causes Solutions
Error occurs during the program
installation.
Open port failed.
No signal indicated.
Dialing failed
Internet connection failure.
The installation program can't auto run. (If
the Data Terminal supports auto setup
function.)
No CD-ROM disk icon in "My
Computer".
The driver might be unable to work and
the application is unable to run normally if
the modem is pulled out and plugged in
Please download the program at
The setup file may be damaged.
Directly run the software before the Data
Terminal is plugged in.
The port is occupied by other applications,
such as “Hyper terminal”, or the software
is already running.
Antenna is not connected to the Modem.
Out of the network service area.
The antenna or RF component is damaged. Replace relevant damaged parts.
Wrong setting of parameters. (Phone, User,
Password.)
Network congestion or failure. Try again later.
The Data Terminal is already connected. Disconnect and Reconnect.
Poor network signal.
The program has already been installed in
current system.
Autorun function in CD-ROM is disabled
because of installation of anti-virus
software in the system, or Windows Vista
system itself disables Autorun function by
CD-ROM by default.
CD-ROM icon will automatically
disappear once the program is installed
successfully.
The program is not yet installed, and no
other previous version was installed in the
system.
The operating system needs installing
Update Roll 1 patch for Win2K SP4.
website WWW.ZTEMT.COM
reinstall it.
Close the software, plug in the Data
Terminal and run it again.
Close relevant software and run the
software again.
Insert the antenna into the Data
Ter min al.
Make sure it is in the CDMA network
service area.
Correct the parameter settings.
Consult your service provider for
details.
View signal strength indication or
change antenna orientation to get
optimal performance.
Firstly remove the
original program and
insert the modem again.
Open "My Computer" to enter
CD-ROM disk icon, and double-click
Setup.exe to install manually.
This is normal. If you want to display
CD-ROM disk icon, you could firstly
remove the program and then insert
the modem again.
Please restart your computer. Please
contact your local operator or product
technical support center if CD-ROM
disk icon doesn't appear after your
computer is restarted.
Please download the patch from the
following web site and install it.
http://www.microsoft.com/downloads
and
ZTE Corporation 14 http://www.zte.com.cn
Page 18
CDMA2000 1X Wireless Data Terminal User Guide
Failures Causes Solutions
again when the application is being used
under Win2000 operating system (SP4).In
this case, the device in device manager
will be marked with yellow exclamation
mark, and the system must be restarted to
run normally.
/details.aspx?familyid=B54730CF-88
50-4531-B52B-BF28B324C662&dis
playlang=en
ZTE Corporation 15 http://www.zte.com.cn
Page 19
CDMA2000 1X Wireless Data Terminal User Guide
17. FCC Regulations
z This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
z This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s
authority to operate the equipment.
ZTE Corporation 16 http://www.zte.com.cn
Loading...