Zoom 1095 User Manual

User Manual

Series 1095 , 4403XY Zoom 4 Port Router with W

1

Copyright

The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission.

Trademarks

All products, company, brand names are trademarks or registered trademarks of their respective companies. They are used for identification purpose only. Specifications are subject to be changed without prior notice.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio interference in a commercial environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instructions in this manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference, in which case the user, at his own expense, will be required to take whatever measures are necessary to correct the interference.

CE Declaration of Conformity

This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022/A1 Class B.

The specification is subject to change without notice.

2

		Table of Contents
Chapter 1		Introduction ...........................................................................	4
1.1	Packing List .................................................................................		4
1.2	Spec Summary Table .................................................................		5
1.3	Hardware Configuration.............................................................		7
1.4	LED indicators.............................................................................		8
1.5	Button Definition..........................................................................		8
1.6	Procedure for Hardware Installation ........................................		9
Chapter 2		Getting Start........................................................................	11
Chapter 3		Making Configuration ........................................................	17
3.1	Login to Configure from Wizard..............................................		18
3.2	System Status ...........................................................................		22
3.3 Advanced ...................................................................................			22
3.3.1 Basic Setting ..........................................................................			22
3.3.2 Forwarding Rules ..................................................................			37
3.3.3 Security Settings....................................................................			41
3.3.4 Advanced Settings ................................................................			55
3.3.5 Toolbox....................................................................................			65
Appendix A FAQ and Troubleshooting .............................................			68
What can I do when I have some trouble at the first time? ......			68
How do I connect router by using wireless? ...............................			70

3

Chapter 1 Introduction

Congratulations on your purchase of this outstanding Wireless Broadband Router. This product is specifically designed for Small Office and Home Office needs. It provides a complete SOHO solution for Internet surfing, and is easy to configure and operate even for non-technical users. Instructions for installing and configuring this product can be found in this manual. Before you install and use this product, please read this manual carefully for fully exploiting the functions of this product.

1.1 Packing List

items	Description	Contents	Quantity
1	WiFi Broadband Router		1
3	Power adapter 5V 1A		1
4	CD		1

zWireless broadband router unit

zInstallation CD-ROM

zPower adapter

4

1.2 Spec Summary Table

	Device Interface				CDE530AM-002
	Ethernet WAN		RJ-45 port, 10/100Mbps,	1
			auto-MDI/MDIX
	Ethernet LAN		RJ-45 port, 10/100Mbps,	4
			auto-MDI/MDIX
	Antenna		2 dBi fixed antenna	1
	WPS		For WPS connection and Enable
	Button/Wireless			1
			“Wireless Function”
	On
	Reset Button		Reset to Factory Default setting	1
	LED Indication		Status / WAN / LAN1 ~ LAN4/ WiFi		●
	Power Jack		DC Power Jack, powered via external	1
			DC 5V/1A switching power adapter
	Wireless LAN (WiFi)
	Standard		IEEE 802.11b/g-lite compliance		●
	SSID		SSID broadcast or in stealth mode		●
	Channel		Auto-selection, manually		●
	Security		WEP, WPA, WPA-PSK, WPA2,		●
			WPA2-PSK
	WPS		WPS (Wi-Fi Protected Setup)		●
	WMM		WMM (Wi-Fi Multimedia)		●
	Functionality
	Ethernet WAN		PPPoE, DHCP client, Static IP		●
	WAN Connection		Auto-reconnect, dial-on-demand,		●
			manually
	One-to-Many NAT		Virtual server, special application,		●
			DMZ, Super DMZ(IP pass-through)
	NAT Session		Support NAT session	10000
	SPI Firewall		IP/Service filter, URL blocking.		●
	DoS Protection		DoS (Deny of Service) detection and		●
			protection
	Routing Protocol		Static route, dynamic route (RIP		●
			v1/v2)
	Management		SNMP, UPnP IGD, syslog, DDNS		●
	Administration		Web-based UI, remote login,		●

5

		backup/restore setting
	Performance	NAT up to 90Mbps and Wireless up
		to70Mbps
	Environment & Certification
	Package	CDE530AM-002, DC 5V/1A power
	Information	adapter, Quick Installation Guide
		Device dimension (mm)
		Package dimension	156x110x22
		(246x210x62mm) SP/MP/ZP
	Package
		Package dimension
	Information		●
		(214x146x69mm) PP
		Package dimension	○
		(290x234x100mm) AP
	Operation Temp	Temp.: 0~40oC, Humidity 10%~90%	●
		non-condensing
	Storage Temp	Temp.: -10~70oC, Humidity: 0~95%	●
		non-condensing
	EMI Certification	CE/FCC compliance	●
	RoHS	RoHS compliance	●

*Specifications are subject to change without prior notice.

6

1.3 Hardware Configuration

Antenna

Power Jack

Reset Button

Auto MDI/MDIX RJ-45 Ports Automatically sense the types of WAN and LAN when connecting to Ethernet

7

LAN1~LAN4

LEDs

						2 in1 Button
Status		WAN		Wi-Fi
						1. WPS
LED		LED		LED
						2. Wireless On

1.4 LED indicators

			LED status	Description
	Status		Green in flash	Device status is working.
	WAN LED		Green	RJ45 cable is plugged
			Green in flash	Data access
	LAN LED		Green	RJ45 cable is plugged
			Green in flash	Data access
			Green	WLAN is on
	WiFi LED		Green in flash	Data access
			Green in fast flash	Device is in WPS PBC mode
			Green in dark	Wi-Fi Radio is disabled

1.5 Button Definition

8

Description

Enable

1. When Wireless is off, press this button (about 1 sec) to enable

“Wireless”

"Wireless Radio".

and WPS

2. When Wireless is On, press this button (about 1 sec)to execute WPS function.

Reset

Press (6) sec to reset to default when the device works simultaneously.

1.6 Procedure for Hardware Installation

Step 1 Insert the Ethernet cable into LAN Port:

Insert the Ethernet patch cable into LAN port on the back panel of Router, and an available Ethernet port on the network adapter in the computer you will use to configure the unit.

Step 2 Insert the Ethernet patch cable into Wired WAN port:

Insert the Ethernet patch cable form DSL Modem into Wired WAN port on the back panel of Router.

Step 3 Power on Router:

Connect the power adapter to the receptor on the back panel of your Router.

9

Step 5. Complete the setup.

When complete, the Status LED will flash.

10

Chapter 2 Getting Start

Insert the CD into CD reader on your PC. The program, AutoRun, will be executed automatically. And then you can click the Easy setup Icon for this utility.

Configure the settings by the following steps.

2.1.Select Language then click “Next” for continues.

2.2 Setup mode

You can select Wizard mode to run the setup step-by-step or run advanced mode to diagnose the network settings of the router.

11

2.3Advanced mode Setup.

Check the PC, Router or Internet icons for the Status of PC, Router or Internet.

2.4Quick Wizard Install mode Setup

1.Make sure the router is powered on.

2.Make sure your network adapter is connected to the LAN port of the router

3.Make sure your network adapter has an IP address.

Click “Next” for continues

12

2.5.Wirel ess Setting.

Key in the SSID, Channel and Security options, and then click “Next” for continues.

2.6 Auto Detect WAN Service.

Click “Next” for continue.

Click the button, “Let me select WAN service by myself”, to disable this function.

Note: The Item supports to detect the Dynamic and PPPoE WAN Services only

13

Example, the Dynamic WAN type is detected.

2.7. Manual select WAN Service

In the manual mode, Click the any icons for continues.

2.8 Summary of the settings and Next to “Reboot”

Click “Next” for continue.

14

2.9 Apply the Settings or Modify.

Click “Next” for continue.

2.10 Test the Internet connection.

Test WAN Networking service. Click “Next” for continue.

You can ignore the by select the “Ignore Test”.

15

2.11 Setup Completed.

The EzSetup is finish, you can open the default web browser to configure advanced settings of the Router.

Click “Finish” to complete the installation.

16

Chapter 3 Making Configuration

This product provides Web based configuration scheme, that is, configuring by your Web browser, such as Mozilla Firefox or or Internet Explorer. This approach can be adopted in any MS Windows, Macintosh or UNIX based platforms.

17

3.1 Login to Configure from Wizard

Type in the IP Address (http://192.168.123.254)

Type password, the default is “admin” and click ‘login’ button.

Press “Wizard” for basic settings with simple way.

Press “Next” to start wizard.

18

Step 1:

Set up your system password.

Step 2:

Select Wan Type.

Auto Detecting or

Setup Manually.

19

Step 3:

Setup the LAN IP and WAN

Type.

Example:

Step 4:

Please fill in PPPoE service information which is provided by your ISP.

Step 5:

Set up your Wireless.

20

Set up your Authentication and Encryption.

Step 6:

Then click Apply Setting.

And then the device will reboot.

Step 7:

Click Finish to complete it.

21

3.2 System Status

This option provides the function for observing this product’s working status: WAN Port Status.

If the WAN port is assigned a dynamic IP, there may appear a “Renew” or “Release” button on the Sidenote column. You can click this button to renew or release IP manually.

Statistics of WAN: enables you to monitor inbound and outbound packets

3.3 Advanced

3.3.1 Basic Setting

Please Select “Advanced Setup” to Setup

22