DSL Gateway/Router — User Manual
CONTENTS
1.OVERVIEW.......................................................................................................................................................3
1.1 ABOUT ADSL.....................................................................................................................................3
1.2 ABOUT ADSL2/2+..............................................................................................................................3
1.3 FEATURES..........................................................................................................................................3
2 SPECIFICATION..............................................................................................................................................4
2.1 INTERFACE INTRODUCTION.........................................................................................................4
2.1.1 INDICATOR AND INTERFACE..................................................................................................4
2.1.2 SPLITTER SPEC..........................................................................................................................4
2.2 HARDWARE CONNECTION.............................................................................................................5
2.3 LED STATUS INDICATION...............................................................................................................5
3. CONFIGURATION..........................................................................................................................................6
3.1 DEFAULT CONFIGURATION...........................................................................................................6
3.2 COMPUTER CONFIGURATION.......................................................................................................6
3.3 ADSL MODEM CONFIGURATION...................................................................................................6
3.3.1 LOG IN..........................................................................................................................................6
3.3.2 SAVE SETTING............................................................................................................................6
3.4 WAN CONFIGURATION....................................................................................................................7
3.4.1 CONFIGURATION GUIDE.........................................................................................................7
3.4.2 RFC1483 BRIDGE CONFIGURATION.......................................................................................9
3.4.3 PPPOE CONFIGURATION........................................................................................................11
3.4.4 STATIC ADDRESS.....................................................................................................................12
3.5 WIRELESS CONFIGURATION .................................................................................................................13
3.5.1 WIRELESS SETUP.....................................................................................................................13
3.5.2 WIRELESS SECURITY.............................................................................................................13
3.5.3 WIRELESS MAC Filter..............................................................................................................15
4 OTHER CONFIGURATION.........................................................................................................................16
4.1 LAN CONFIGURATION...................................................................................................................16
4.1.1 CONFIGURATION OF MODEM’S IP ADDRESS....................................................................16
4.1.2 DHCP CONFIGURATION.........................................................................................................17
4.2 PASSWORD CONFIGURATION.................................................................................................17
5. TROUBLESHOOTING.................................................................................................................................18
5.1 UNABLE TO ACCESS INTERNET..................................................................................................18
5.1.1 CHECK THE LINE AND THE DEVICE...................................................................................18
5.1.2 CHECK YOUR CONFIGURATION..........................................................................................18
ANNEX:SHIPPING LIST...............................................................................................................................19
Page 2 Total 2 Pages
DSL Gateway/Router — User Manual
1.OVERVIEW
1.1 ABOUT ADSL
An ADSL MODEM is a broadband Internet access device, which utilizes the high frequency segment of
the phone line to transmit high-speed data without affecting the voice transmission. The frequency of the ADSL
signal is higher than that of voice, so voice and ADSL signal can coexist in one line by using a splitter to
insulate each from the other. ADSL data transfer adapts the asymmetry model. It supports upload transmission
speed up to 1Mbps and download speed up to 8 Mbps (24Mbps for ADSL2+). ADSL is an ideal device for
broadband access.
1.2 ABOUT ADSL2/2+
Transmission performance of ADSL2 is improved comparing with the first generation of ADSL. These
improvements are mainly concerned with long distance, anti-line-loss, anti-noise, etc. By doubling the
transmission bandwidth, ADSL2+ has implemented a downlink rate as high as 24 Mbps. Therefore, Internet
applications such as synchronous transmission of multi video stream, online games and huge capacity of
downloading files are made possible.
1.3 FEATURES
1、 Support ANSI T1.413 ISSUE 2、 ITU G.992.1 (G.DMT)、ITU G.992.2 (G.LITE) 、ITU G992.3、
ITU G992.5
2、 Web-based configuration and monitoring.
3、 Support multiple PVCs.
4、 Routing function.
5、 NAPT、DHCP function.
Page 3 Total 3 Pages
2 SPECIFICATION
2.1 INTERFACE INTRODUCTION
2.1.1 INDICATOR AND INTERFACE
DSL Gateway/Router — User Manual
Table 2.1
ITEM Name State introduction
POWER A steady red light means the power connection works properly
Indicator
Interface
DSL Yellow, shows DSL line status.
INTERNET Green, Flashing means the Modem is transmitting or receiving data
WLAN Green, Indicates status of connection to the wireless device
LINE Connected with phone line or “ADSL” port of the splitter.
ETHERNET
SWITCH Power interface, Connect with power adapter.
POWER To turn on / off the power.
RST
To be connected to a PC network card by a straight-through network cable, also
can use a crossover cable to connect to Hub, Switch or Router.
Press the reset button and turn on the power, then keep pressing the reset button for
5 seconds. Then you can reset the modem with the default settings.
2.1.2 SPLITTER SPEC
Table 2.2
Interface Introduction
LINE Connected with telephone line
Connect with the LINE port of the
ADSL
PHONE Connect with telephone
ADSL Modem using telephone
line provided.
Page 4 Total 4 Pages
DSL Gateway/Router — User Manual
2.2 HARDWARE CONNECTION
Introduction:
1、 Use a telephone cord to connect the LINE port of the splitter with the RJ-11 port (the phone jack) on
the wall.
2、 Use another telephone cord to connect the ADSL port of the splitter with the LINE port of the ADSL
Modem.
3、 Use another telephone cord to connect the telephone set with the PHONE port of the splitter.
4、 Connect Ethernet port of the ADSL MODEM with 10/100BASE-T port of the computer using the
network cable that comes with the modem.
5、 Plug in the power cord, and turn on the power.
If you do not want Internet services and telephone voice services simultaneously, please just connect the
LINE port of the ADSL Modem with the RJ-11 port (the phone jack) on the wall using a telephone cord. In this
case, the splitter is not necessary.
2.3 LED STATUS INDICATION
Table 2.3
Status POWER (red)
Steady light Power on The modem is in good
Flashing / In handshaking status / /
Fast flashing / / Transmitting or receiving
Off Power off Connection not set up Not connected with PC
DSL (yellow) INTERNET (green) WIRELESS(green)
Connected with PC Wireless is
connection
data
properly
connected
Transforming data
Wireless is disabled
Page 5 Total 5 Pages
DSL Gateway/Router — User Manual
3. CONFIGURATION
3.1 DEFAULT CONFIGURATION
ADSL MODEM has pre-configured with the VCI/VPI which is in common use. The default dial-up mode
is bridge encapsulation. For bridge mode, no need to configure any more parameter. However, the third party
dial-up software is needed for connection with the Internet.
3.2 COMPUTER CONFIGURATION
The default IP address for ADSL MODEM is: 192.168.1.1; The Subnet Mask is:255.255.255.0. Users can
configure ADSL MODEM through an Internet browser. ADSL MODEM can be used as gateway and DNS
server; users need to set the computer’s TCP/IP protocol as follow:
1、 Set the computer IP address at same segment of ADSL MODEM, such as set the IP address of the
network card to one of the “192.168.1.2”~ “192.168.1.254”.
2、 Set the computer’s gateway the same IP address as the ADSL Modem ’s.
3、 Set computer’s DNS server the same as ADSL Modem ’s IP address or that of an effective DNS server.
3.3 ADSL MODEM CONFIGURATION
3.3.1 LOG IN
Open the browser; input http://192.168.1.1 at the address column. Press “Enter” key then the entry dialog
box will show up as Figure 3.1. Input Username: admin , Password: password (capital sensitive), then press
Enter.
Figure 3.1
3.3.2 SAVE SETTING
After getting through each page for parameters setting, click “Save” or “Save apply” to store the value in
ADSL MODEM. Briefly, we named “Save”.
Page 6 Total 6 Pages