OWNER’S
MANUAL
The following parts are included with your Zodiac Zoom (Model# W83371):
(1) Wheel Deflector
45 Degree Elbow
(1)
W83406
(1) Cleaner Head
(1) FlowKeeper™ Valve
1) Hose Lengths
1
(
(1) Disc
(1) 41/2" Connector
(1) Aboveground Valve Cuff
THANK YOU FOR PURCHASING ZODIAC ZOOM™.
YOUR ZODIAC ZOOM HAS BEEN DESIGNED AND MANUFACTURED TO BE EASILY
INSTALLED AND TO PROVIDE YEARS OF LOW MAINTENANCE OPERATION.
PRIOR TO INSTALLING YOUR NEW ZODIAC ZOOM, PLEASE DO THE FOLLOWING:
1) Complete and return the warranty card.
2) Record your purchase information on the spaces provided below.
3) Attach your invoice (or a copy) to this page.
These actions will insure prompt warranty service, should it be required. Simply present your owner’s manual, along with the invoice at any of our
authorized warranty centers nationwide.
RECORD YOUR RANGER POOL CLEANER DATA HERE:
Date of Purchase ___________ Purchased From ________________________________________ Serial Number: ______________________________
City __________________________________________________ State_______________________________ Zip Code _________________________
(located on underside of machine head)
ZODIAC ZOOM LIMITED WARRANTY
This ZODIAC ZOOM was carefully inspected before shipment from our warehouse. Upon unpacking, if any part proves defective or missing, please notify Zodiac
Pool Care, Inc. immediately. Please consult owner’s manual for complete instructions on the installation and operation of your ZODIAC ZOOM.
ZODIAC POOL CARE, INC. WARRANTS THE ZODIAC ZOOM POOL CLEANER AGAINST ALL MANUFACTURING DEFECTS AND ALL WEAR AND
TEAR FOR TWO (2) YEARS. ALL WARRANTIES ARE EFFECTIVE FROM THE DATE OF PURCHASE.
Should this product prove defective in workmanship, materials or wear during the applicable warranty period, the consumer’s sole and exclusive remedy shall be
such repair or replacement of the product as provided below.
THE LIMITED WARRANTY PROVIDED HEREIN IS THE SOLE AND EXCLUSIVE WRITTEN WARRANTY WITH RESPECT TO THE ZODIAC
ZOOM POOL CLEANER. ALL IMPLIED WARRANTIES IMPOSED BY APPLICABLE LAW, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THE EXPRESS LIMITED
WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU.
1. Discoloration of the ZODIAC ZOOM pool cleaner. This is caused by reaction to ultraviolet rays and the chemicals used in the pool water. Discoloration does not
affect the operating ability of the ZODIAC ZOOM. Therefore, this Limited Warranty does not cover the replacement of discolored parts.
2. Damage to or malfunction of the unit resulting from excess chlorination or improper water chemistry balance.
3. Replacement of parts which fail or become defective as a result of improper installation, negligence, misuse, abuse or tampering by unauthorized repair personnel.
4. Age, pool water imbalance, and improper installation can cause vinyl pool liners to become brittle or unduly wrinkled. Corrosion of the supporting walls and /or
irregularities in the pool base may also cause liner failure. The use of this product in such an environment is at the pool owner’s risk. Therefore, the pool owner
hereby releases the manufacturer from any and all claims for damage where these conditions exist.
5. The ZODIAC ZOOM is designed for use in aboveground pools only. If unit is used in any other application, the pool owner hereby releases the manufacturer from
any and all claims. This misuse will void all warranty on the unit.
6. In no event shall Zodiac Pool Care, Inc. be liable in contract or in tort, or under any other legal theory, for lost profits or revenues, loss of use or similar economic
loss, or for indirect, special, incidental, consequential or similar damages, even if it has been advised of the possibility of such claim. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
IMPORTANT WARRANTY NOTICES FOR VINYL LINER POOL OWNERS
• Certain vinyl liner patterns are particularly susceptible to rapid surface wear or pattern removal caused by objects coming into contact with the vinyl surface,
including pool brushes, pool toys, floats, fountains, chlorine dispensers, and automatic pool cleaners.
• Some vinyl liner patterns can be seriously scratched or abraded simply by rubbing the surface with a pool brush. Ink from the pattern can also rub off during the
installation process or when it comes into contact with objects in the pool.
removal, abrasion or marking on vinyl liners.
• Vinyl liners are subject to deterioration or damage due to age, the effect of chemicals, corrosion or failure of the supporting walls; as well as improper installation,
maintenance or cleaning of the supporting walls or base.
• Before installing the Zodiac Zoom, examine the interior of your pool carefully. If your vinyl liner is brittle or has stones, wrinkles, roots or metal corrosion in
contact with the underside of the liner, or has damage to the base material or supporting walls, do not install the Zodiac Zoom before having a qualified professional
perform the necessary repairs.
ZODIAC POOL CARE, INC. WILL NOT BE RESPONSIBLE FOR LINER DAMAGE CAUSED BY (1) A ZODIAC ZOOM CLEANER WHICH IS IN
DISREPAIR, (2) PATTERN REMOVAL FROM A VINYL LINER, OR (3) A ZODIAC ZOOM CLEANER USED IN A POOL HAVING AN AGED OR
DETERIORATED LINER.
No claim under this Limited Warranty will be recognized unless the registration card, included in your box, is completed and returned within fifteen (15) days of the
purchase date.
to those claims which may be asserted under the Limited Warranty relating to any defect, malfunction or wear of the ZODIAC ZOOM.
To obtain warranty replacements or repair, call (888) 786-7797 for authorization. When submitting a claim, always supply serial number, evidence of purchase date,
retailer and a brief description of the problems/defects encountered. Zodiac Pool Care, Inc. reserves the right to repair or replace all defective or worn parts covered by
this Limited Warranty and return same to purchaser, freight collect.
Zodiac Pool Care, Inc. assumes no responsibility for any warranties or representations made by other individuals or businesses beyond the express terms contained
in this Limited Warranty.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state
Only the original purchaser may submit a claim under this Limited Warranty. Purchaser’s claims against Zodiac Pool Care, Inc., shall be limited
For sale and use in the United States, Canada and Mexico only. This pool cleaner is not warranted or guaranteed outside of the United States, Canada or Mexico.
THIS LIMITED WARRANTY EXCLUDES THE FOLLOWING:
Zodiac is not responsible for, and the Limited Warranty does not cover, pattern
WARRANTY PROCEDURES
This pool cleaner is covered by one or more of the following Canadian and U.S. patents and Canadian registered design:
U.S. patent nos. 4642833, 4742593, 5315728, 5450645 and 5433985. Canadian patent nos. 1254105, 1256262 and 2134220.
ABOVEGROUND AUTOMATIC POOL
CLEANER INSTALLATION GUIDE
Pool Preparation .......................................................................................................................... 2
Disc Installation............................................................................................................................ 3
Wheel Deflector Installation .........................................................................................................3
Hose Assembly................................................................................................................................4
Removing Air From Hose..............................................................................................................4
Installation......................................................................................................................................5
Troubleshooting..............................................................................................................................6
Accessories......................................................................................................................................7
HOW YOUR ZODIAC AUTOMATIC POOL CLEANER WORKS
•Your pool pump pulls water from the skimmer through a strainer basket, then pushes the water through the filter system and back
into the pool through the return inlets.
• The Zodiac Automatic Pool Cleaner connects to the skimmer or dedicated vacuum line with the hose sections provided. Water
flows through the Diaphragm of the cleaner at a rate of 14 to 19 gallons per minute.
•Diverting or re-directing the return inlets downward breaks up the circulation pattern of water within the pool. This allows
random cleaning around the pool.
• Reading through the entire manual before installing your new Zodiac Automatic Pool Cleaner will help to insure it is installed
properly and eliminate potential problems.
POOL COMPONENTS
SKIMMER
IMPORTANT!
Return flow must be directed
toward pool bottom as shown.
• Please become familiar with the components of your pool shown.
• All diagrams are provided for reference of terminology used throughout this manual. Your pool may vary.
POOL
RETURN
FLOW
INLET
PUMP
FILTER
W83401
Thank you for purchasing this Automatic Pool Cleaner from Zodiac. Prior to installing your pool cleaner,
review the parts and warranty information and insure that all parts shown are included with your unit.
Although the appearance of your model Zodiac Pool Cleaner may differ slightly from some
drawings shown in this installation guide, installation steps remain the same.
STEP 1 - POOL PREPARATION
• Before installing the Zodiac Automatic Pool Cleaner, examine the interior of your pool carefully. If your vinyl liner is
brittle or has stones, wrinkles, roots or metal corrosion in contact with the underside of the liner, or has damage to the
base material or supporting walls, do not install the pool cleaner before having a qualified professional perform the
necessary repairs.
• Manually vacuum the pool. This eliminates unnecessary adjustment later.
• Clean the pool filter and empty the skimmer and pump strainer baskets. Filter pressure rises as debris is cleaned from the water,
thus reducing flow.
•Divert the pool return inlets downward - (IMPORTANT!). Your Zodiac Automatic Pool Cleaner must move randomly throughout
the pool. Water circulating at the surface will influence the hose and limit coverage.
•To adjust the return inlet, loosen the lock ring and redirect the eyeball downward, then retighten the lock ring. If the eyeball is
difficult to adjust, insert a screwdriver inside the eyeball and gently adjust downward.
• If the return inlets cannot be pointed downward, then you MUST install Zodiac return line diverters. They are available through
your Zodiac dealer.
BEFORE ADJUSTMENT
TOP VIEW
TOP VIEW
FOR POOLS WITH RETURN INLET
DIRECTIONAL FITTINGS
Replace the directional eyeball
with Zodiac retrofit eyeball return
line diverter and reinstall eyeball
retaining ring.
Part #W90153 for
11/2" return lines
Part #W90155 for
2" return lines
SIDE VIEW
AFTER ADJUSTMENT
SIDE VIEW
IF UNABLE TO ADJUST RETURN INLETS
OR FOR POOLS WITHOUT RETURN INLET
DIRECTIONAL FITTINGS
Use Zodiac universal return
line diverter (Part #W24100).
Pinch wires together and
insert fully into return inlet.
2
STEP 2 - DISC INSTALLATION
Slide the disc over the foot pad with the word “TOP” facing upward. Insure the disc fits properly in the grooves provided and
rotates freely on the foot pad.
FOOTPAD
DISK
TOP
STEP 3 - WHEEL DEFLECTOR INSTALLATION
Zodiac Pool Cleaners require specific wheel deflector locations depending on the model. Follow the instructions below for your
specific model. (Model number is stated on the manual cover.)
MODEL# W01099
Slide the wheel deflector onto the cuff of the first hose section
that connects to the cleaner head.
MODEL# W01698 and W83371
Slide wheel deflector onto the cassette swivel and over the
wheel adapter.
MODEL# W04598
Slide the wheel deflector over the outer extension pipe and
secure between the two lowest pipe ridges.
3
STEP 4 - HOSE ASSEMBLY
FOR CENTER INSTALLATIONS
Use enough hose sections to reach the farthest point in the pool, plus two (2) sections.
SKIMMER / WALL
VACUUM FITTING
FOR CORNER OR END INSTALLATIONS
Use enough hose sections to reach the farthest point in the pool, plus one (1) section.
SKIMMER / WALL
VACUUM FITTING
Note: You may not need to use all or you may need more hose sections, depending upon your pool size.
STEP 5 - REMOVING AIR FROM HOSE
• Submerge the pool cleaner head. When bubbles stop coming
from the extension pipe, attach the cleaner head to the
female end of the hose.
•Turn on the filtration system.
• Fill the hose with water by placing the end over a return inlet.
RETURN
INLET
4
STEP 6 - INSTALLATION
FLOWKEEPER VALVE
The Flowkeeper Valve MUSTBEused on all installations. The pool pump
provides more gallon per minute flow than your pool cleaner requires. The
Flowkeeper provides a way to regulate the flow with a bypass so the pool
pump and the pool cleaner run properly. Skimming action is maintained
through a bypass throat in the valve. As the filter collects debris, the valve
automatically maintains the correct flow to the cleaner.
The Flowkeeper Valve comes preset at the setting required for your cleaner.
There are a total of three setting options. The lower the setting number, the
lower the flow to the cleaner head. Lower flow rates result in slower cleaner
operation, and higher flow rates result in faster cleaner operation. If the
cleaner is moving extremely fast or climbing the pool walls that is an
indication that the flow is too high and the Flowkeeper setting must be
reduced. To adjust the flow, pull the adjustment handle to raise or lower the
setting. The red tab on the valve can be depressed to keep the bypass open to
allow for surface skimming. In most cases, keeping the bypass open will
cause the cleaner to stop.
A
Red Tab
Adjustment
Handle
B
(1) Flowkeeper Valve
• Using the parts shown, choose a fitting combination best suited for your pool from figures A or B and install. You may have parts
left over.
• Once installed, turn on the pump and allow the cleaner to begin cleaning the pool. Your installation is now complete.
FIGURE A
Skimmer Installation
C
D
A
(1) Valve Cuff
FIGURE B
Vacuum Line Installation
Arrow on Flowkeeper must be
pointed toward skimmer.
(1) 41/2" Connector
C D
(1) 45° Elbow
B
Arrow on Flowkeeper must be pointed
downward, toward skimmer.
CAB
Important: To help prevent suction entrapment accidents, wall
vacuum fittings should have a safety vac lock installed. Contact your
builder or retail pool professional for details.
5
TROUBLESHOOTING
PROBLEM SOLUTION
Cleaner stops & starts • Ensure the pump is on high speed, if pump has two speeds.
• Check Diaphragm for blockage or damage.
• Check hoses for leaks.
• Clean baskets and filter.
Cleaner is patterning • Add return diverters or divert return inlets downward.
• Lay hose in a straight line in the sun to relax memory.
• Confirm proper hose length - add 1 to 2 hose sections.
• Purchase Hose Deflectors from your Zodiac Dealer.
Cleaner isn't covering • Use return flow to move cleaner to opposite end.
opposite end of pool • Add return diverters or divert return inlets downward.
Cleaner stuck at steps • Utilize return flow to move cleaner.
• Confirm proper hose length.
• Reduce the setting on the Flowkeeper Valve.
• Install a large 16” wheel deflector.*
Cleaner stuck on ladder • Reduce the setting on the Flowkeeper Valve.
• Remove ladder if possible.
• Install a large 16” wheel deflector.*
Cleaner flips over • Contact Tech Services for local warranty station.
Cleaner moves extremely • Reduce the setting on the Flowkeeper Valve.
fast or climbs walls
Cleaner moves slowly • Increase the setting on the Flowkeeper Valve.
• Ensure the pump is on high speed, if pump has two speeds.
• Check Diaphragm for blockage or damage.
• Check hoses for leaks.
• Clean baskets and filter.
Cleaner doesn't move • Clean baskets & filter.
• Check Diaphragm for blockage or damage.
• Check hose sections for leaks by lifting each section above water.
• If your pool has multiple skimmers, close the skimmer the cleaner is not attached to.
Solar blanket installation • Coverage will be limited due to blanket.
* If your cleaner did not include a large 16” wheel deflector, it can be purchased from your dealer as an accessory.
NOTE: In cold water of 60˚ or less, water flow through the cleaner must be increased to compensate for the reduced
flexibility of the hose and diaphragm. To increase flow, increase the setting on the Flowkeeper Valve.
IF ADDITIONAL ASSISTANCE IS REQUIRED,
6
PLEASE CALL TECH SERVICES AT 1-888-786-7797
ZODIAC ACCESSORIES
PART ILLUSTRATION PART NO. DESCRIPTION
1. W24100 Return Line Diverter
Use when no other
return inlet directional
fittings exist.
Use to replace standard
with 4
1
/2" Hose Connector
Use when heavy debris or
leaf situations exist.
Prevents sticking at
steps or other obstacles.
2A
1
2A. W90153 Retrofit Eyeball Return
(for 11/2" return inlet) Line Diverter
2B. W90155 directional inlet eyeballs
2B
3
4
(for 2" return inlet)
3. W26705 The Leaf Catcher
4. W46155 Large 16” Wheel Deflector
5
6
5. W44800 Pool Pulse
Flow meter that measures
the volume of water running
through the cleaner for
troubleshooting and
setting flow.
6. W24209 Hose Deflector
Use to correct patterning
or coverage issues.
7
ZODIAC POOL CARE, INC.
2028 N.W. 25th Avenue
Pompano Beach, FL 33069
1-888-786-7797
www.zodiacpoolcare.com
ZODIAC ZOOM™CARE AND MAINTENANCE
To maintain quality, performance and increase the lifespan of your Zodiac Zoom, please do the following:
1. Thoroughly clean the skimmer basket, pump basket and pool filter on a regular basis. Always disconnect the hose from the
skimmer before backwashing.
2. REMOVE THE CLEANER BEFORE SUPER CHLORINATING OR ADDING POOL CHEMICALS. Reinstall the Zodiac
Zoom when the imbalance is corrected or after a minimum of 4 hours from super chlorination. Chemical damage is not covered
under warranty.
3. NEVER COIL THE HOSE when the cleaner is removed from the pool. A coiled hose can be straightened with hot water or by
laying it on a warm pool deck for several hours.
X
INCORRECTCORRECT
4. Remove disc and store it flat during the off-season. Store the cleaner head in a warm and dry place.
Quick Access Cassette System
Unlike other competitive automatic pool cleaners, the Zoom has the Quick Access Cassette System. This unique feature allows almost
instantaneous access to the one moving part – the Diaphragm.
Large foreign objects, such as children’s toys, tree branches and rocks, should be removed manually from your pool prior to operating
an automatic pool cleaner. In the event a foreign object does not get manually removed and a blockage occurs, the Quick Access
Cassette System allows you the opportunity to remove the blockage or check the Diaphragm for damage in minutes at poolside.
DIAPHRAGM REMOVAL
Holding the hull assembly in one hand, unscrew the cassette (Step 1) and remove (Step 2). Holding the cassette at each end, unscrew
the cassette pipe from the Diaphragm chamber two full turns (Step 3). Grasp the lip of the Diaphragm and pull the Diaphragm out
(Step 4). The inner pipe will be attached and will make a loud noise. Pull the Diaphragm off of the inner pipe, leaving the retaining
ring on the Diaphragm (Step 5), and inspect for blockage or cuts. Remove blockage and rinse. Do not use sharp objects as damage to
Diaphragm may occur. If replacement parts are needed, contact technical service at 1-888-786-7797 for an authorized warranty station.
Step 1
DIAPHRAGM ASSEMBLY
Prior to reinstalling the Diaphragm, rinse the Diaphragm and inner extension pipe thoroughly to remove any grit or algae. Attach the
Diaphragm to the inner e
on the underside of the Diaphragm’s ridges, push the Diaphragm into the chamber (Step 7). Holding the cassette at each end, tighten the
cassette pipe until snug, but do not overtighten. (Step 8). Insert the cassette assembly into the hull assembly and tighten (Step 9).
xtension pipe using the retaining ring (Step 6). Slide the inner e
Step 2
Step 3
Step 4
xtension pipe into the Diaphragm chamber
Step 5
. Pressing
Step 6
Step 7
Step 8
Step 9
ZODIAC ZOOM™PARTS DIAGRAM
11
10
2
1
13
3
14
4
12
5
15
16
9
17
PART NO. DESCRIPTION
1. W70036 Extra Large Wheel Deflector
2. W83306 Wheel Adapter
6
7
3. W83302 Cassette Pipe w/Handnut
4. W74000 Compression Ring
5. W83382 Diaphragm Chamber
6. W83312
7. W69039 Footpad
8. W83300
9. W56525 Threaded Inner Extension
10. W81600 Diaphragm Retaining Ring
11. W69698 Long-Life Cassette Diaphragm
12. W83383 Cassette Assembly Complete
13. W60050
14. W90146 45º Elbow
15. W64700 Aboveground Cuff
16. W33205 4 1/2” Connector
17. W21205
Hull Assembly
Scalloped Disc
Flowkeeper Valve
White Hose Kit – 11 x 1 Meter
8
ZODIAC POOL CARE, INC.
2028 N.W. 25th Avenue
Pompano Beach, FL 33069
1-888-786-7797
www.zodiacpoolcare.com
Loading...