Zline FMTF-SS, FFCS-OR, FPBC-SS, FPBL-CH, FPBL-MB Installation Manual And User's Manual

...
0 (0)
F a u c e t
CONTENTS
Faucets
SAFETY INSTRUCTIONS 1
Prior to Installation
Safety Tips
Care and Maintenance
SPRING KITCHEN FAUCETS 2
Models: FSNZ-CH FSTB-CH
FSNZ-SS FSTB-SS
Dimensions
Parts
Assembly
PULL DOWN KITCHEN FAUCETS 5
Models: FPBL-CH
FPBL-SS
FPBL-MB
Dimensions
Models: FPTB-CH FPTF-CH FPNZ-CH
FPTB-SS FPTF-SS FPNZ-SS
FPTB-MB FPTF-MB FPNZ-MB
Dimensions
Models: FPBC-CH
FPBC-SS
Dimensions
Parts
Assembly
CONTENTS
Faucets
SMART KITCHEN FAUCET 11
Model: FMTF-SS
Dimensions
Parts
Assembly
KITCHEN FAUCETS WITH SPRAYER 14
Models: FFCS-CH FFCC-CH
FFCS-OR FFCC-OR
Dimensions
Parts
Assembly
TROUBLESHOOTING 20
Safety Instructions
Prior to Installation
Make sure that the cold and hot water lines are turned off.
Wrap all threaded connections with Teflon tape. Always wrap in a clockwise
direction.
Cover your drain to avoid losing parts.
Do not disassemble the main faucet body, as it has been installed and commissioned
correctly and precisely before delivery to the factory.
To keep the faucet from jamming, flush the water pipe before installation.
Using condition: Working pressure at 0.05-1.0 MPa (including cold and hot water
pressure) with applicable water temperature: 39.2°F - 1 94°F.
Care and Maintenance
To keep the product clean and shining, follow the steps below:
1. Rinse clean with water and dry with a soft cloth.
2. Do not clean with soaps, acid, polish, abrasives, or harse cleaners.
3. Do not use cloth with a course surface.
4. Unscrew the aerator and clean when necessary.
If soldering the water connections when installing the faucet, remove the O-rings,
cartridges, and washers before applying any heat.
Protect your eyes when cutting or soldering.
Do not over tighten screws/nuts. Finger tighten, then use a wrench/screwdriver to
tighen the fixing screw/nut until snug.
1
Spring Kitchen Faucets
Spring Kitchen Faucet Models
FSNZ-CH FSTB-CH
FSNZ-SS FSTB-SS
FSNZ-MB FSTB-MB
Dimensions
105 mm 4 ¹/₈ in
5
524 mm
10 ¹/₈ in
52
2 ¹/₁₆ in
273 mm
10 ³/₄ in
220 mm
8 ¹¹/₁₆ in
6 in
153 mm
2
Spring Kitchen Faucet
Parts for Models:
FSNZ-CH FSTB-CH
FSNZ-SS FSTB-SS
FSNZ-MB FSTB-MB
1
6
2
3
1. Faucet Body
2. Base O-Ring
3. Rubber Washer
4. Metal Washer
5. Fixing Nut and Screws
6. Spray Head
4
5
3
Spring Kitchen Faucet
Assembly for Models:
FSNZ-CH FSTB-CH
FSNZ-SS FSTB-SS
FSNZ-MB FSTB-MB
Hot
(Red)
Hot
Hot
9/16-24 UNEF
Cold
Cold
(Blue)
Cold
4
Pull Down Kitchen Faucets
Pull Down Kitchen Faucet Models
FPBL-CH
FPBL-SS
FPBL-MB
Dimensions
5
107 mm
3
4 ¹/₁₆ in
399 mm
15 ¹¹/₁₆ in
10 ³/₄ in
52 mm 2 ¹/₁₆ in
273 mm
221 mm
8 ¹¹/₁₆ in
172 mm
6 ³/ in
Loading...
+ 16 hidden pages