ZKAccess ZKIP472 Specsheet

ZKIP4 WDR Series
ZKIP472-Cube IP Camera
• H.264
WDR
1Megapixel
• Full HD
Technical Specications
Camera Performance
Video
Video Compression: H.264 main profile level 3 Video Resolution: Main stream: 1280 x 720
Secondary stream: 640 x 352
Video Frame Rate: 1~25 frame settable Image settings: Brightness, contrast, saturation, color, up/
down, left/right, WDR on/off
Audio
Audio Streaming: Two- way Audio Compression: G.726/G.711 Audio Input: 1 channel line/Mic input Audio Output: 1 channel line output
Network
Security: Multi-level users access with password protection Network Interface: 10Base-T/100Base-TX Ethernet interface
WIFI 802.11b/g/n wireless network
(optional)
Supported Protocol: TCP/IP, HTTP, UDP, ARP, SMTP, FTP,
DHCP, DNS, DDNS, NTP, UPNP, RTSP/
RTCP/RTP, ONVIF
Alarm and Event Management
Alarm Input: N/A Alarm Output: NA Motion Detection: 4 independent detection areas settable RS485 port: N/A Alarm Trigger: Motion detection, external input Alarm Events: File upload via FTP, HITP and email; motifica-
tion via email, HTTP and TCP; external output
activation; video and audio recording to edge
storage; pre- and post-alarm video buffering
On Board Storage
Card slot: Supports TF Card, up to 32G Storage: Snapshots and video clips
General
Casing: Front: Plastic
Back: Metal (Aluminum Alloy)
Color: Dark gray and White Power Supply: 12V DC, 1.5A
POE: 802.3af POE standard (optional)
Power Consumption: 8 W max Working Conditions: -10 ºC ~ 55 ºC, 10~95 ﹪ RH Weight: Net: 0.35lb. (0.16kg)
Gross: 1.28lb. (0.58kg)
Warranty: 12 Months
What’s in the Box Dimension Interface
2.6”
ZKAccess Security Management Software
ZKIP4 WDR
Design and Specications subject to change without notice
ZKAccess
201 Circle Drive North, Suite 116
Piscataway, NJ 08854, USA
Tel: +1 732-412-6007 Fax +1 732-412-6008
sales@zkaccess.com zkaccess.com
SoftwareBracket
Installation Guide
Installation
Guide
Power
Supply
ZKAccess-division of ZK Teco
2.6”
(65 mm)
(65 mm)
4.6”
4.6”
(117 mm)
(117 mm)
1.8”
1.8”
(47.3mm)
(47.3mm)
1.45”
1.45”
(37mm)
(37mm)
Thread
1/4-20UNC
2.4”
2.4”
(61mm)
(61mm)
Loading...