ZKAccess Wireless Bridge Specsheet

Wireless Bridge

Wireless Bridge for ZKAccess
C3 and InBio door controllers
minimizes installation time & materials.

Supports IEEE 802.11g
C3 and InBio door controllers sold separately.

The ZKAccess Wireless Bridge reduces labor time and cost by eliminating the need
to run data cable when connecting ZKAccess door controllers to the network.

Features and Benefits

• Range - 2.4 GHz wireless system with up to 300-foot range

with nearest wireless router

• Secure communication - Password verification, MAC address

authentication, SSID suppression and advanced WPA encryption

• Simple Management - Wireless Bridge has built-in webserver.

No software or drivers needed.

• Resilient - Low power consumption and up to

15kv Electro Static Discharge protection

• User friendly - Power-on LED, Ethernet link LED and Signal strength LED's

• Transparency - Wireless Bridge appears to network devices as if an

Ethernet cable is connecting the 2 network nodes.

Specifications Built-in webserver Typical installation

Standards

IEEE802.11g

Data Rate

2.4 GHz up to 54 Mbps

Transmission Range

Up to 300 feet when installed outdoors
(typically 150 feet indoors)

Security

MAC Address Filtering, WEP/WPA encryption,
Hide SSID in beacons, Layer 2 isolation

Management Conguration

Web-based (HTTP)

Aux. Input

Door Sensor

Electric Lock

Aux. Output

ZKAccess

6 Kingsbridge Road, Unit 8, Fairfield, NJ 07004
Phone: [phone] • Fax: [phone] • [e-mail] • www.zkaccess.com

© Copyright 2016. ZKTeco Inc. ZKTeco Logo and ZKAccess Logo are registered trademarks of ZKTeco or a related company.
All other product and company names mentioned are used for identification purposes only and may be the trademarks of their respective owners.
All specifications are subject to change without notice. All rights reserved.