ZKAccess TF1600-M, TF1600 User Manual
Note:
Installation Guide
Version: 1.1 Date: May, 2013
Registe ring user inf ormatio n and fingerp rint, we mu st use the ACCESS3.5
Softwar e and fingerp rint USB se nsor, then u pload .
3.Lock Connection
(1) The system supports NO lock and NC lock. For example the NO lock (normally open at power on) is connected with "NO"
and "COM" terminals, and the NC lock is connected with "NC" and "COM" terminals.
(2) When the electrical lock is connected to the Access Control System, you need to connect one FR107 diode (shipped in package) in
parallel with the connection to prevent self-inductance EMF feedback the system.
1) Share power with the lock:
NB: Do not reverse the polarities!
1.Equipment Installation
Fixing Hole
Fixing Hole
Mount ing Pap er
(only fo r your re feren ce)
Instruction fo r the Mou nting P aper
Before the devic e is fast ened, p lease
stick the paper to t he plac e where y ou
want to install it , then ma ke hole s and
lay cables accor ding to t he moun ting
paper.
Wiring Hole
10
11
Fixing Hole
12
13
(1) Paste the mounting template on
the wall. Drill the holes according
to the marks on the template
(2) Remove the screws on the
bottom of device.
(holes for screws and wiring).
(4) Fix the r ubber pad an d the back
plate on the w all accord ing t o
(5) Place the unit onto the mounting bracket, and
tighten the screws at the bottom of the unit.
the mounti ng paper.
2. Structure and Function
2.Structure and Function
Access Control System Function
TCP/IP
RS485
Sensor
⑥
②
Exit
④
Exit Switch
External Reader
⑤
RS485 Converter
①
Lock
③
Alarm
* Reserves the final rights of modification and interpretation by our company.
(1) If a registered user verified, the device will send a signal to unlock the door.
(2) The door sensor will detect the ON-OFF state. If the door is unexpectedly
opened or improperly closed, the alarm signal (digital value) will be triggered.
(3) If the device is illegally removed, the device will signal the alarm.
(4) External card reader is supported.
(5) External exit button is supported.
(6) Supports RS485, TCP/IP communication to be able to connect with a PC. One
PC can manage multiple devices.
(3) Take away the back plate.
DC12V
NC LOCK
+
-
-
+
Red
+12V
Blac k
GND
Purp le
BELL-
BELL+
Brow n
Whit e
SEN
Blac k
GND
Gray
Blue
Red
Yellow
Oran ge
Gree n
BUT
NO1
COM1
NC1
NO2
COM2
+
FR 107
-
NO LOCK
DC12V
+
-
+
-
-
+
FR 107
Red
Blac k
Purp le
Brow n
Whit e
Blac k
Gray
Blue
Red
Yellow
Oran ge
Gree n
Device share power with the lock:
ULOCK=12V, I-ILOCK>1A…… And the distance between the lock and the device is ≤10 meters.①;
2) Does not share power with the lock:
DC12V
DC power
NC LOCK
+
-
+
-
-
FR 107
+
Red
+12V
Blac k
GND
Purp le
BELL-
BELL+
Brow n
Whit e
SEN
Blac k
GND
Gray
BUT
Blue
NO1
Red
Yellow
Oran ge
Gree n
COM1
NC1
NO2
COM2
+
-
DC12V
NO LOCK
DC power
+
-
+
-
-
+
-
+
FR 107
Red
Blac k
Purp le
Brow n
Whit e
Blac k
Gray
Blue
Red
Yellow
Oran ge
Gree n
Device does not share power with the lock:
A. ULOCK=12V, I-ILOCK≤1A; B. ULOCK≠12V; C. The distance between the lock and the device is >10 meters.
D. We suggest user does not share power with the lock.
①:‘I’: device output current, ‘ULOCK’: lock voltage,‘ILOCK’: lock current.
4. Other Connections
Whi te
Bla ck
Gra y
Blu e
Red
Yello w
Ora nge
Gre en
Exit Button
Alarm Power
-
+
Exit
Alarm
SEN
GND
BUT
NO1
COM1
NC1
NO2
COM2
Door Sensor
5. Power Connection
5. Power Connection:
The device working voltage DC 12V, electric current 500mA
(50mA for standby current).
negative is connect with ’GND’ (do not reverse the polarities).
DC12V
Positive is connected with‘+12V’;
+
-
Red
Bla ck
Alarm Voltage output ≤ DC 12V
WARNING: Do Not operate with Power connected.
！
+12V
GND
BELL-
BELL+
SEN
GND
BUT
NO1
COM1
NC1
NO2
COM2
+12V
GND
BELL-
BELL+
SEN
GND
BUT
NO1
COM1
NC1
NO2
COM2
+12V
GND
6. Wiegand Output
The device supports standard Wiegand ,
26-bit output, so you can connect it with
various access control devices.
DATA0
Access Control Panel
DATA1
GND
Gre en
Whi te
Bla ck
Blu e
Yello w
WD0
WD1
GND
485+
485-
7. Wiegand Input
The device has a Wiegand input port, which enables the connection
to a slave card reader. Devices are control devices on both sides
of the door to control the access and electric lock.
Red
Bla ck
Whi te
Gre en
Blu e
Gra y
Pur ple
+12V
GND
IWD1
IWD0
RLED
GLED
BEEP
+12V
GND
DATA1
DATA0
RLED
GLED
BEEP
(1) Do not exc eed 90m (met ers ) distance b etw een the Devi ce and Access Cont rol Lock OR Ca rd re ader.
(In the case o f long dista nce i nstallat ion , use the Wiega nd Si gnal Exten der, to minim ise i nterfere nce.)
(2) To keep a b alanced an d sta ble Wiegand sign al, connec t the d evice, acc ess c ontrol loc k or ca rd reader
on the same "G ND"(grou nd) p ort.
8.Other Functions & Features
(1) Tamper Func tio n:
When installing device, user need to put the magnet between the device
and the back plate. If the device is being illegally removed, the magnet
loses connectivity and will trigger the alarm.
(2) Res tore Fac tor y Setti ngs :
Operation: Between 30 – 60 seconds after the tamper alarm has sounded,
press the tamper switch 3x times.
(3) Device m ould is manu fac tured from f ire pro of ma terial.
(4) Working temp era ture: -40℃ ~ +45℃.
Front View Back View
Tamper
Magnet
RS485 Reader Function:
Equipmen t supports R S48 5reader fu nct ion, can be th rough RS48 5co mmunicat ion c onnected t o FR1200 rea der.
FR120 0 rea der for slav er, achieve R S48 5 Anti-pass bac k function s. If s elect “RS4 85reader f unc tion” , so dev ice
can not conn ect with PC th rou gh RS485 com mun ications .
Diagram of the device connect to reader as below(The device act master):
48
5
A
ccess C
+
4
85
-
+1
2
V
G
N
D
o
n
tr
ol De vi
ce
Y
e
l
lo
w
Pu
rp
le
R
ed
B
la
ck
Re
ad
e
r
Diagram of the device connect to controller as below (The device act slaver):
SWITCH
#
3 R
GND
+12V
(separate power supplies)
ead er
..
.
PWR
STATE
EXT
RS485
PC
RS485
#
#1 R
2 R
eader
ead er
#
8 Reader
GND
485485+
GND
+12V
(separate power supplies)
Set the RS485 address (device number) by Access3.5 software.
(2) TCP/IP Mode:
Two ways for TCP/IP connection.
(A)Crossover cable: The device and PC connected directly.
(B)Straight cable: The device and PC connected to
LAN/WAN through switch/Lanswitch.
Switch
9. Communication
There are two modes that the PC software communicate and exchange information with the device:
RS485 and TCP/IP, and supports remote control.
(1) RS485 Mode:
Please use specified RS485 wire, RS232/485 active converter
and bus-type wiring. When the distance is long, it is need to
parallel a terminal resistance and the value is 120 ohm.
485+
485-
RS485
Converter
* Reserves the final rights of modification and interpretation by our company.
Terminals definition as below:
Terminals PC Serial Ports
485+ RS485+
485- RS485-
485+ 485-
RS485 Bus
485+ 485- 485+ 485-
…
IP Address：192.168.1.124
IP Address：192.168.1.201
Subnet Mask：255.255.255.0
10. Caution:
(1) Con nec t the power cable a fte r al th e wir ing has b een c ompleted . If th e device is wo rki ng abno rma lly,
please shu t down the dev ice , and make nec ess ary checks . Please not e tha t any "HOT SWOP" of w iri ng on
the device m ay damage th e dev ice, and the w arr anty does no t cov er dama ge ca used by impr ope r operatio ns.
(2) We reco mme nd use the DC 12 V/3 A power supply. Pl eas e contact ou r tec hnical sta ff fo r det ails.
(3) Ple ase read t he te rmina l and w iring desc rip tion and dia gra ms carefully be for e com mencing wi th
insta lla tions. Any damag e to the devic e cau sed by impro per o peration s, will not be c ove red under wa rra nty.
(4) Kee p the e xposed par t of wi re le ss than 5mm, t o avo id unexpec ted c onnectio n.
(5) Ple ase c onnect the ' GND ' when start ing i nstallat ions, espe cia lly in an envi ron ment where s tatic elec tri city
is very high .
(6) Do no t cha nge the cabl e typ e in case of a lon g dis tance inst allation s.
Subnet Mask：255.255.255.0
WARNING: Do Not operate with Power connected.
！
Loading...