Installation Guide
WARNING!
Read these instructions carefully prior to installation.
• DO NOT touch the lamp directly at any time. Oil from your skin may damage the lamp. Use a soft cloth.
• DO NOT use with bulbs exceeding the recommended wattage.
• When used with incandescent bulbs, be careful about the lamp's heart. DO NOT touch it or place it near curtains or other
combustible materials.
• ALWAYS cut ALL relevant power before installing a lighting fixture, and do not restore power to the line until the lamp has been
FULLY installed.
• Check for electric, gas, plumbing lines before drilling or consult a professional.
Parts List
1
1×
STEP 1
2 3
2× +
1 extra
1 1/8″
3× +
1 extra
4
2×
1 1/8″
5
2× +
1 extra
Wiring
L = Hot/Black
N = Neutral/White
= ~ = Ground/Green
STEP 2
Secure the mounting hanger (1) to the electric junction box with the screws (2) and
washers (5) provided.
STEP 3
DECORATIVE NUT SCREWS (4)
WIRE CONNECTOR (3)
Connect the hot wire to the hot wire from the power supply. Connect the neutral wire
to the neutral wire from the power supply. Fix the ground wire to the ground wire
from the power supply.
STEP 4
WIRE CONNECTOR (3)
Install the canopy (shade/cover) of the decorative fixture on the mounting
hanger, using the supplied screws or decorative nuts (2).
JUNCTION BOX
SCREWS (2)
JUNCTION BOX
BLACK (HOT)
JUNCTION BOX
DECORATIVE NUT
SCREWS (4)
MOUNTING HANGER (1)
WASHER (5)WASHER (5)
SCREWS (2)
MOUNTING HANGER (1)
GROUND
WHITE (NEUTRAL)
CANOPY
MOUNTING HANGER (1)
CANOPY
DECORATIVE NUT (2)
STEP 5
Install light bulbs. This fixture is rated for up to eighteen (18) E26 40-Watt maximum
bulbs (not included).
Turn your power back on at the breaker box. Then check if the product turns on.
×18
Install the light as shown above.
CONTACT US
Thank you for your purchase! If you have any questions or concerns, don't hesitate contact us.
We'll resolve your problem ASAP! Customers are always the best teachers to keep us growing!
Loading...