ZETTLER AZ8 Datasheet

`

AZ8

MINIATURE PCB RELAY

FEATURES

Subminiature size
High sensitivity, 110mW pickup
Coils to 48VDC
Epoxy sealed for automatic wave soldering
Contacts rated at 3, 6 or 10A
Life expectancy to 20 million operations
Extremely low cost
Class B insulation (130°C) standard
Class F insulation (155°C) version available
UL, CUR and VDE approved

CONTACTS

Arrangement SPDT (1 Form C)

Ratings Resistive load :
Light Duty Max switched power : 100W or 600VA

Max switched current : 3A
Max switched voltage : 150*VDC / 300VAC
UL Rating : 2A at 28VDC or 300VAC

0.125HP 120VAC

0.1HP 120/240VAC, pilot duty 100K cyc.

Medium Duty Max switched power : 180W or1800VA
Max switched current : 6A
Max switched voltage : 150*VDC or 300VAC
UL Rating : 6A at 28VDC or 300VAC

0.125HP 120/240VAC (100K cyc.)

Heavy Duty Max switched power : 300W or 2400VA
Max switched current : 10A
Max switched voltage : 150*VDC or 300VAC
UL Rating : 10A at 30VDC or 120VAC

0.25HP 120VAC, 0.5HP 250VAC

must be taken. Please contact the factory.

Material Light duty : Silver
Medium duty : Silver nickel
Heavy duty : Silver cadmiu m oxide

Resistance <100 milliohms initially

COIL

Power
At Pickup Voltage Standard coil 210mW

(typical) Sensitive coil 140mW

Heavy duty : 228mW (110mW availabl e)

Max Continuous Class B : 2.0W 20° C ambient
Dissipation 1.6W 40° C ambient

2.1W 40°C ambient
Temperature Rise At nominal coil voltage
Standard coil 38°C
Sensitive coil 28°C

Max Temperature 130°C Class B
155°C Class F

SPST (1 Form A) 10A vers i on onl y

1.2

/

A at 120/240VAC, pilot dut y 100K cyc.

0.6

3.0

/

A at 120/240VAC gen use 100K cyc.

1.5

1.5

/

A at 120/240VAC, pilot dut y 100K cyc.

0.8

3.8

/

A at 120/240VAC gen use 100K cyc.

1.9

* Note : If switching voltage is greater than 30VDC, special precautions

Class F : 2. 5W 20°C ambient

GENERAL DATA

Life Expectancy Minimum operations
Mechanical 100 million operations
Electrical Light Duty 3x10

Heavy Duty 1x10
Operate Time (typical) 5ms at nominal coil voltage
Release Time (typical) 2ms at nominal coil vol t age

(with no coil suppression)

Dielectric Strength 750 Vrms contact to contact
(at sea level for 1 min) 3000 Vrms contact to coil

Insulation Resistance 1000 megohms min at 20°C. 500VDC,

50% RH

Dropout Greater than 5% of nominal c oi l vol t age
Ambient Temperature At nominal coil voltage

Operating -55° C t o 90°C Class B

-55°C to 115°C Class F
Storage -55°C to 130°C Class B

-55°C to 155°C Class F
Vibration 0.062” DA at 10 – 55 Hz

10g at 55 – 55Hz

Shock 10g
Enclosure PET polyester
Terminals Tinned copper alloy, PC
Max Solder Temp 270°C
Max Solder Time 5 seconds
Max Solvent Temp 80°C
Max Immersion Time 30 seconds
Weight 8 grammes

Med Duty

5

at 3A, 120VAC

1.8x105 at 6A, 120VAC

5

at 10A, 120VAC

NOTES

1. All values at 20°C

2. Relay may pull in with less than ‘Must Operate’ value

3. Unsealed relays should not be dip cleaned

4. Other coil resistances and sensitivities avai l abl e upon request

5. Specifications subject to change without notic e

Logistic Design (UK) Limited

Unit 3 Eagle Centre W ay, Sedgwick Road Tel [phone]
Luton LU4 9US, United Kingdom Fax [phone]

www.zettlerrelay.com

[e-mail]

LDZR201000