Zero88 Level 6 operation manual

Introduction

The Level 6 DMX is a 6 channel
lighting controller with a Master fader
and a “power on” LED.

It may be wall mounted, using the slots
provided, or placed on an appropriate
surface.

Power Supply

Separate plug mounted mains
transformer supplying low voltage via a
4 pin ring locking DIN connector.

Mains Voltage 230V -18% to +10%
(190V - 253V)

Pin 1 9V @ 400mA
Pin 2 0V Signal Ground
Pin 3 Not used
Pin 4 Not used

DMX Output

5 pin XLR, not isolated, with voltage
protection.

Data on channels 1 - 6 only.

Pin 1 0V Signal Ground
Pin 2 1- DMX drive complement
Pin 3 1+ DMX drive true
Pin 4 Not connected
Pin 5 Not connected

The Level 6 DMX is designed for use
as a lighting control desk only, and is
unsuitable for any other purpose. It
should only be used by, or under the
supervision of, an appropriately
qualified or trained person.

Zero 88 Lighting Ltd. reserves the right
to make changes to the equipment
described in these instructions without
prior notice. E & OE.

© Zero 88 Lighting Ltd. 2000

Issue 1 - November 2000

Stock No. 73 - 456 - 00

Zero 88 Lighting Ltd.
Usk House
Llantarnam Park
Cwmbran
Gwent NP44 3HD
United Kingdom

Tel: [phone] *
Fax: [phone]
e-mail: [e-mail]
Web: www.zero88.com

* 24 hour answerphone

LEVEL 6 DMX INSTRUCTIONS AND

SPECIFICATION

Fig 2: DMX Output Connector

Fig 1: Power Supply Connector