Zephyr Adjustable Depth Liners AK088xAS, AK8800AS, AK8100AS User Manual

Loading...

AK08xxAS Adjustable Depth Liners

WARNING:

When building a custom hood for a power pack, always follow all applicable construction codes and standards.

See the illustrations and table below to locate your liner choice and use corresponding custom hood base dimensions. For the liner installation, only the bottom of the custom hood is needed. Do not finalize the entire custom hood yet, because an opening is needed for the power pack.

Recommended

 

 

thickness:

 

 

3/4''

2 1/16''

B

 

A

 

Plywood base thickness: 3/4”

FIG 1

 

Liner

Power Pack

 

Custom Hood

*Inside

*Inside Depth (B)

 

Model

Model

 

Exterior Width

Width (A)

 

 

 

 

Without Backboard

**With Backboard

 

 

 

 

 

 

 

 

 

AK0800AS

 

AK8000AS

 

30 inches

 

28 1/2

17 1/2” - 20 1/2

17 1/8” - 20 1/8

 

 

 

 

 

 

 

and

 

 

 

 

 

AK0836AS

 

 

36 inches

 

34 1/2

 

 

 

 

AK8100AS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AK0806AS

 

AK8200AS

 

36 inches

 

34 1/2

20 1/2” - 23 1/2

20 1/8” - 23 1/8

 

AK0842AS

 

 

42 inches

 

40 1/2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AK0848AS

 

 

 

48 inches

 

46 1/2

 

 

 

AK0854AS

 

AK8300ASX

 

54 inches

 

52 1/2

20 1/2” - 23 1/2

20 1/8” - 23 1/8

 

AK0860AS

 

 

 

60 inches

 

58 1/2

 

 

 

AK0886AS

 

 

 

36 inches

 

34 1/2

 

 

 

AK0882AS

 

AK8800AG

 

42 inches

 

40 1/2

 

 

 

AK0888AS

 

 

48 inches

 

46 1/2

20 1/2” - 23 1/2

20 1/8” - 23 1/8

 

 

and

 

 

 

 

 

AK8800AS

 

 

 

 

 

 

 

AK0884AS

 

 

54 inches

 

52 1/2

 

 

 

AK0880AS

 

 

 

60 inches

 

58 1/2

 

 

*Dimension does not include 3/8” wide flange around liner.

**The inside depth shown in the table above assumes a minimum cabinet backboard thickness of 3/8”.

FIG 1: Zephyr recommends the base of the custom hood to be 3/4” thick plywood. The sides, front and backboard (if included) of the custom hood to be 3/4” thick, assuming standard cabinet widths.

Consider the shape and size of the power pack to determine the configuration of the custom hood. For more details, refer to the installation manual of the power pack.

Zephyr Corporation

2277 Harbor Bay Pkwy, Alameda, CA 94502

Tel: 1.888.880.8368 Fax: 1.888.990.8368 e-mail: productsupport@zephyronline.com

FEB09.0201

1

www.zephyronline.com

Installation -

+ 1 hidden pages