Specifications and Main Features
- Model: ZENnOnRH4 848C7493A0
- Engine Type: 2-cycle air cooled petrol engine
- Fuel Mixing Ratio: Gasoline 50: Oil 1 (using Zenoah genuine oil)
- Fuel Tank Capacity: Unknown
- Oil Tank Capacity: Unknown
- Weight: Unknown
- Noise Level: Unknown
- Guide Bar Length: Unknown
- Type of Saw Chain: Unknown
- Safety Features: Chain brake for kickback protection
- Operation Modes: normal mode and anti freeze mode
- Starter Type: Manual pull start
- Maintenance Interval: after each use regular services is being followed
- Recommended Oil: SAE #10W-30 or SAE #30-#40 in summer, SAE #20 in winter
Frequently Asked Questions
Q: What sort of oil is ideal for the engine?
A: An anti –oxidant added quality oil specially designed as air-cooled 2-cycle engine oil; JASO FC GRADE OIL or ISO EGC GRADE is recommended.
Q: What’s the mixing ratio of the fuel for the chainsaw?
A: When using Zenoah genuine oil the mixing ratio is gasoline 50: oil 1. After mixing, ensure to agitate well.
Q: What steps can I take if the chain brake is malfunctioning?
A: If the chain brake malfunctions, do not use the chainsaw and take it to a dealer for examination and repairs.
Q: Is it permissible to use the chainsaw to cut materials other than wood?
A: No, the over saw is essentially designed for cutting only wood. Other materials should never be cut.
Q: Which protective equipment should I use while working with the chainsaw?
A: You are advised to use a helmet, eye shields, thick gloves, rubber boots with grips, and ear defenders.
Q: How often do I need to service the chainsaw?
A: Internal maintenance needs to be done on regular basis including between uses as well as some intervals as specified in the user manual.
User Manual
Loading...