Zenoah CHTZ7500 User Manual
848D3J93B0 (408)
HTZ7500
CHTZ6000
CHTZ7500
HEDGE TRIMMERS
May 2004
NOTE :
1. Use KOMATSU ZENOAH genuine parts specified in the parts list for repair and/or replacement.
2. KOMATSU ZENOAH does not warrant the machines, those which have been damaged by the use
of any parts other than those specified by the company.
3. When placing orders of parts for repair and/or replacement, check if the model name and the serial
number are suitable to those specified in the parts list, then use parts number described in the
parts list.
4. The contents described in the parts list may change due to improvement.
5. The parts for the machine shall be supplied within ten (10) years after the machine is discontinued.
[It is possible that some specific parts may be subject to change of their delivery term and list price
within the limit of ten (10) years after the machine is discontinued. And it is also possible that some
parts may be available even after the limit of ten (10) years.]
APPLICABLE SERIAL NUMBERS : 40100101 and up
Fig.1 CUTTING UNIT
HTZ7500
HTZ7500
Q'TY
Key# PART NUMBER DESCRIPTION NOTE
/UNIT
51 1638-84210 • NUT 1
52 1638-84220 • SCREW 1
53 T4519-32410 PIPE 1
54 T4519-32510 MOUNT 1
55 T4519-32520 PLATE 1
56 0280-10504 NUT 2
57 T4503-31210 ABSORBER 4
58 T4519-32220 COLLAR 2
59 T4503-32230 WASHER 2
60 08034-20414 BAND 1
61 01252-30530 BOLT 2
62 3540-13260 BOLT 2
63 1565-72311 CLAMP 1
64 848D3J90S0 LABEL 1
101 8488U00010 TOOL SET 1
102 T4017-91130 • SOCKET 1
103 3540-91120 • SPANNER 1
104 1030-91340 • DRIVER 1
105 09007-00425 • WRENCH 1
Q'TY
Key# PART NUMBER DESCRIPTION NOTE
/UNIT
1 848D3J6500 BLADE ASSY 1
2 T4543-11110 • PLATE, upper 1
3 T4543-11120 • PLATE, lower 1
4 848D3065A0 • BLADE, lower 1
5 848D3065B0 • BLADE, upper 1
6 T4521-11311 • SPACER 9
7 T4520-11331 • SCREW 4
8 01252-30520 • BOLT 4
9 01252-30525 • BOLT 1
10 T4531-11350 • NUT 5
11 T4543-11410 • PLATE 1
12 848D3066E1 • BRACKET 1
13 T4543-11230 • COVER 1
14 848D3J66G0 • GUARD 1
16 848D306111 GEARCASE COMP. upper 1
17 06004-06001 • BEARING 2
18 04065-02812 • RING 1
19 848D3061B0 • PLATE 1
20 T4543-42320 • BOLT 2
21 848D306121 GEARCASE COMP. botom 1
22 848D3061B0 • PLATE 1
23 T4543-42320 • BOLT 2
24 T4543-21220 GASKET 1
25 848D305111 DRUM 1
26 848D3062A0 GEAR, drive 1
27 T4543-42210 GEAR, driven 1
28 T4543-42100 ROD ASSY 2
29 T4503-12114 PLATE 1
30 T4521-11330 BOLT, blade 4
31 3199-13350 FITTING 1
32 T4543-42410 FELT 1
33 3350-15250 BOLT 6
34 01252-30625 BOLT 3
35 T4503-31101 HANDLE-R COMP. 1
36 848D3G32L0 SPACER 4
37 T4503-31220 HOLDER 2
38 T4503-31230 CAP 2
40 T4519-32100 LEVER-ASSY 1
41 1638-84130 • LEVER 1
42 1638-84140 • LEVER 1
43 6844-84150 • TOP 1
44 1638-84160 • CLAMP 1
45 T4519-13300 • CABLE COMP. 1
46 1638-84170 • SPRING 1
47 1638-84180 • SPRING 1
48 0263-60620 • SCREW 1
49 1638-84190 • NUT 1
50 0260-60535 • SCREW 1
Fig.1 CUTTING UNIT
Loading...