Zenith F-185 Installation And Operating Manual

Installation and Operating Guide

Machine Number
| F-185 (Main Unit : FFH-185A, Speakers : FE-185E) |

MICRO AUDIO COMPONENT

2

Explanation Graphical Symbols:

The lightning flash with arrow­head symbol, within an equilater­al triangle is intended to alert the
user to the presence of uninsulat­ed dangerous voltage within the
product’s enclosure that may be
of sufficient magnitude to consti­tute a risk of electric shock to
persons.

The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and mainte­nance(servicing) instructions in
the literature accompanying the
appliance.

WARNING

TO REDUCE THE RISK OF FIRE OF
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOIS­TURE.
To avoid electrical shock, do not open the
cabinet, Refer servicing to qualified per­sonnel only.

The apparatus shall not be exposed to
dripping or splashing and that no
objects filled with liquids, such as
vases, shall be placed on the apparatus.

Warning:

Do not install this equipment in a confined
space such a book case or similar unit.

This label is located on the interior.

This Compact Disc player is classified as a
CLASS 1 LASER product.
The CLASS 1 LASER PRODUCT label is
located on the exterior.

CAUTION

Use of controls or adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.

Laser component in this product is capa­ble of emitting radiation exceeding the
limit for Class 1.

CAUTION:INVISIBLE LASER RADIA­TION WHEN OPEN AND INTERLOCKS
DEFEATED. AVOID EXPOSURE TO
BEAM.

VARNING:OSYNLIG
LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD STRÅLEN ÄR FARLIG.

Attention:Quand l'appareil est ouvert, ne
pas s'exposer aux radiations invisibles du
faisceau laser.

CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
CLASSE 1 PRODUIT LASER

CAUTION

CAUTION:TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT REMOVE
COVER(OR BACK) NO USER SER­VICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.

RISK OF ELECTRIC

SHOCK DO NOT OPEN

3

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

-

All these safety and operating instructions
should be read before the product is
operated.

2. Keep these instructions.

- The safety, operating and use
Instructions should be retained for
future reference.

3. Heed all Warnings.

- All warnings of the product and in the
operating instructions should be
adhered to.

4. Follow all instructions.

- All operating and use instructions
should be followed.

5. Do not use this apparatus near water.

- For example: near a bath tub, wash
bowl, kitchen sink, laundry tub, in a
wet basement; or near a swimming
pool; and like.

6. Clean only with dry cloth.

- Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleanera.

7. Do not block any ventilation openings.
Install in accordance with the
manufacturer’s Instructions.

- Slots and openings in the cabinet are

provided for ventilation and to ensure
reliable operation of he product and to
protect it from over- heating. The
openings should never be blocked by
placing the product on a bed, sofa, rug
or other similar surgace. This product
should not be placed in a built-in
installation such as a bookcase or
rack unless proper ventilation is
provided or the manufacturer’s
instructions have been adhered to.

8. Do not install near any heat sources
such as radiators, heat registers’
stoves, or other apparatus (including
amplifiers) that produce heat.

9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third
prounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord from belong
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the
apparatus.

11. Only use attachments/ accessories
specified by the manufacturer.

12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.

13. Unplug this apparatus during lighting
storms or when unused for long periods
of time.

14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in
any way, such as powersupply cord or
plug is damaged, liquid has been spilled
or objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate
normally, or has been dropped.

4

CONTROL LOCATIONS

Front view

1. STANDBY/ON BUTTON

2. •CD /•COUNTER BUTTON

3. MODE/RIF BUTTON

4. DISPLAY

5. REMOTE SENSOR

6. VOLUME

+/-

7. CD DOOR EJECT (OPEN/CLOSE )
BUTTON

8. • TUNING (+)/(-)(

/ )

BUTTONS (RADIO)

• SKIP/SEARCH BUTTONS(CD)

• REWIND/FAST BUTTONS (TAPE)

• /=TAPE PLAY DIRECTION

BUTTONS

• PRESET (+)/(-) BUTTONS (RADIO)

• CD PLAY BUTTON ( )

9. STOP/CLEAR BUTTON (CD),
STOP BUTTON (TAPE)

10. TIMER BUTTON

11. PUSH EJECT POSITION

12. CLOCK BUTTON

13. SET BUTTON

14. FUNCTION SELECTION BUTTON
(TUNER/BAND, CD, TAPE, AUX)

15. PROG./MEMO. BUTTON

16. BUTTON

17. REC/ :RECORD/RECORD PAUSE
BUTTON (TAPE)

18. HEADPHONE SOCKET (3.5mm)( )

19. REPEAT BUTTON

20. CD SYNC. BUTTON

21. PLAY MODE(

,

,

) BUTTON

Back View

1.ANTENNA (AERIAL AM) CONNEC­TION TERMINALS

2.AUXILIARY INPUT SOCKETS
Connect the audio output RCA (phono)
type left/right plugs from your stereo TV
or VCR or another Tape deck to the
AUX sockets on the back of the unit.

3. SPEAKER CONNECTION
TERMINALS

Front View

Back View

12

34

56

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

A
U
X

SPEAKERS(6 )

L

R

L

R

3

2

1

MDSS

5

DISPLAY

REMOTE CONTROL

1.PLAY/PAUSE indicator

2.FUNCTION, VOLUME LEVEL,CLOCK,
FREQUENCY, TAPE COUNTER, CD
PLAYING TIME, MDSS, EQ PATTERN
display

3.PROGRAM indicator

4.PLAY DIRECTION indicator

5.PLAY MODE indicator

6.CD REPEAT indicator

7.RECORD indicator

8.TIMER indicator

9.SLEEP indicator

10. FM STEREO indicator

1.POWER button

2.TUNER/BAND button

3.AUX button

4.EQ PATTERN button

5.PRESET (

)

button

6.CD FUNCTION buttons

•PLAY/ PAUSE ( ) button

•STOP/ CLEAR ( ) button

•SKIP / SEARCH (

/

)

button

•REPEAT button

7.MDSS button

8.SLEEP button

9.MUTE button

10. VOLUME CONTROL ( ) button

11. PROGRAM button

12. TAPE FUNCTION buttons

• RECORD / RECORD PAUSE

button ( )

• BACKWARD PLAY button ( )

• FORWARD PLAY button ( )

• STOP button ( )

• REWIND /FAST button (

/

)

1

2

3

45 6

11

10

987

1

2

3

4 5 6

10

9

87

REC

STEREO

kHz

RPT

1 ALL

RECPROG.

SLEEP

MHz

7

8
9

10

11

12

2

3

5

6

4

1