Zenith ESPECIFICACIONES Diagram
ProSelect™Series
INTERFACE BOXES
PROSELECT SERIES INTERFACE BOX
LST-5600A
ProSelect
™
Interface Boxes
HCS3000R
Headend Controller for HCS1200T
Factory options for Up-Stream Frequency
Supports MPI Control
LST-4100A
PPV Interface Module
Supports MPI Control
LST-5600A
PPV Interface Box
ATSC/NTSCTuner
Supports MPI Control
Interface Cards
PCZ3100
Multi-Sync Computer Display Card
Operates VGA, SVGA, XVGA and up
to 2048 x 2048 @ 100 Hz.
Compatible with 48 Series only
15-Ft. Mirror Cable Included
HCS1100T
RS-232C Interface Card
Supports MPI Commands
For use with select commercial models
HCS1200T
Control and Monitoring Card
Serial Interface via RF Cable
Supports MPI Commands
HCS1301T
Protocol Conversion Card
RS-232 Communication
Supports MPI Commands
HCS1040T
Power Converter Card
Standard RJ-11
PRODUCT/FEATURES
Product Usage
Remote Television Control
Remote Television
Monitoring
Compatible TV
TECHNICAL
SPECIFICATIONS
Product Dimensions (DxWxH)
Weight
Connector (MPI)
Transmitter Frequencies
Receiver Frequency
Able to Address Up To —
Computer Requirements
Source Selection
Command Set
Request TV Status
HCS3000R
Headend Controller for
HCS1200T
Control the power, monitor
communications status, adjust
volume settings and change
channels all from the remote
computer control
Status of each television
can be monitored, providing
information to verify that
television is on-line and
operating in compliance with
the customer’s requirements
All MPI Enabled TVs
5" x 19" x 1.75"
5 Lbs.
Standard 9-Pin RS-232C
Serial Interface
434 M H z
20 MHz, 25 MHz or 32 MHz
(factory option)
32,768 Televisions
Control Software and
Standard Serial (RS-232)
Interface
Power On, Power Off, Volume
Up, Volume Down, Set Max
Volume, Set Minimum Volume
Signal Strength, Power Status,
TV Volume Level, Channel
Number
LST-4100A
Pay-Per-View Interface
Module
Control power on/off, input
sources, adjust volume
settings and change channels
directly or through MPI
Status of each television
can be monitored, providing
information to verify that
television is on-line and
operating in compliance with
the customer’s requirements
Select Plasma, CRT and LCD
7.375" x 10.750" x 1.750"
2.7 Lbs.
Standard RJ-11
1-Display
Control Software and
Standard Serial (RS-232)
Interface
Any valid input source
Digital MPI– Power On,
Power Off, Volume Up,
Volume Down, Set Max
Volume, Set Minimum Volume
Signal Strength, Power Status,
TV Volume Level, Channel
Number
LST-5600A
Pay-Per-View Interface Box
with Integrated HD Tuner
Control power on/off, input
sources, adjust volume
settings and change channels
directly or through MPI
Status of each television
can be monitored, providing
information to verify that
television is on-line and
operating in compliance with
the customer’s requirements
Plasma and LCD TVs
w/RS-232
11.54" x 14.17" x 2.6"
6.8 Lbs.
Standard RJ-11
1-Display
Control Software and
Standard Serial (RS-232)
Interface
Any valid input source
Digital MPI –Power On,
Power Off, Volume Up,
Volume Down, Set Max
Volume, Set Minimum Volume
Signal Strength, Power Status,
TV Volume Level, Channel
Number
Interface Boxes
www.LGcommercial.com
LG Electronics U.S.A., Inc. 2000 Millbrook Drive, Lincolnshire, IL 60069 Customer Service: 1-888-865-3026
Dimensions and weights are approximate. Design and specifications subject to change without notice. The “LG Life’s Good” is a registered
trademark of LG Electronics U.S.A., Inc. ©2005 LG Electronics U.S.A., Inc. Printed in the USA. LGProSelect0305
PRODUCT/FEATURES
Product Usage
Remote Television Control
Remote Television Monitoring
Compatible TV
TECHNICAL
SPECIFICATIONS
Product Dimensions (DxWxH)
Weight
Connector (MPI)
Transmitter Frequencies
Receiver Frequency
Able to Address Up To —
Computer Requirements
Source Selection
Command Set
Request TV Status
PCZ3100
Multi-Sync Computer
Display Card
Only 48 Series TVs
6" x 1.1" x 3.75"
.25 Lbs.
Standard 15-Pin D-Sub
In/Out
1 Television
Supports Computer Output
VGA, SVGA, XVGA and up to
2048 x 2048 @ 100 Hz and
Apple and other IMAC
Products
Image Freeze Control, Zoom,
Pan and Auto Size
HCS1100T
“Cadet” RS-232 Interface
Card
Power and convenience of an
industry standard interface
with the flexibility and control
of an MPI
Status of each television
can be monitored, providing
information to verify that
television is on-line and
operating in compliance with
the customer’s requirements
All MPI Enabled TVs
6" x 1.1" x 3.75"
.22 Lbs.
Standard 9-Pin RS-232C
Serial Interface
1 Television
Any valid input source,
including FM stations on
FM tuner equipped sets,
can be selected
Complete set of MPI
commands is supported with
no limitations
Signal Strength, Power Status,
TV Volume Level, Channel
Number
HCS1200T
“Lieutenant” Control and
Status Monitoring Card
Control the power, monitor
communications status, adjust
volume settings and change
channels all from the remote
computer control
Status of each television
can be monitored, providing
information to verify that
television is on-line and
operating in compliance with
the customer’s requirements
All MPI Enabled TVs
6" x 1.1" x 3.75"
.20 Lbs.
Standard 9-Pin RS-232C
Serial Interface
20 MHz, 25 MHz or 32 MHz
(factory option)
434 M H z
32,768 Televisions
Control Software and
Standard Serial (RS-232)
Interface
Any valid input source,
including FM stations on
FM tuner equipped sets,
can be selected
Power On, Power Off, Volume
Up, Volume Down, Set Max
Volume, Set Minimum Volume
Signal Strength, Power Status,
TV Volume Level, Channel
Number
HCS1301T
“General” Protocol
Conversion Card
Control the power, monitor
communications status, select
input sources, adjust volume
settings and change channels
all from remote computer
control
Status of each television
can be monitored, providing
information to verify that
television is on-line and
operating in compliance with
the customer’s requirements
All MPI Enabled TVs
6" x 1.1" x 3.75"
.22 Lbs.
Standard 9-Pin RS-232C
Serial Interface
1 Television
Control Software and
Standard Serial (RS-232)
Interface
Any valid input source,
including FM stations on
FM tuner equipped sets,
can be selected
Power On, Power Off, Volume
Up, Volume Down, Set Max
Volume, Set Minimum Volume
Signal Strength, Power Status,
TV Volume Level, Channel
Number
HCS1040T
Power Converter Card
Converts hospital RF and low
voltage AC power into RF
signal output and 12V DC
output to operate the
L10V34H, L10V34S TVs
L10V34H, L10V34S
6" x 1.1" x 3.75"
.22 Lbs.
Standard RJ-11
1 Television
Interface Cards
ProSelect™Series
INTERFACE CARDS
PROSELECT SERIES INTERFACE CARD
HCS-1040T
ProSelect™Series
Loading...