Zenith 7141-21 User Manual

Zenith Dual Wireless

Charging Pad

Instruction Manual

7141-21

1.

Micro-USB Input Port

2.

Charging Pad Surface (2)

3.

LED Indicator Light

What’s included:

1 x Wireless Dual Charger
1 x Micro-USB Charging Cable
1 x Instruction Manual

Tech Specications

Input: 5V/3A

•

Wireless Output1: 5V/1A, Output2: 5V/1A

•

Working Frequency: 110kHz~205kHz

•

Working Distance: ≤8mm

•

Working Efciency: about 70%

•

Dimension: 170*150*6mm

•

INSTRUCTIONS:

1.

Use A Certied USB Plug Adapter:

a.

Connect the provided Micro-USB cable to
the USB plug adapter.

b.

Connect the Micro-USB tip to the input port
on the charging pad.

2.

Charging Mobile Devices:

a.

Ensure that your phone or tablet supports
wireless charging. It will be listed in the
manufacturer’s specications. (See also
the Tech Specications in this manual).

b.

Place the enabled device on one of the
surfaces of the wireless charging pad. The
device should display charging indicator.

c.

When completely charged, remove the
device from the charging pad.

*

Note: While charging, the indicator light will
illuminate Blue.

SAFETY PRECAUTIONS:

Read all the instructions before using the
product.

Do not use on an aircraft or in a hospital.

1.

To reduce the risk of injury, close

2.

supervision is necessary when the product
is used near children.
Do not expose the device to any moisture.

3.
Do not use the device in excess of its

4.

output rating. Overloaded outputs above
rating may result in a risk of re or injury.
Do not use the device if damaged or

5.
modied. Damaged or modied device may
exhibit unpredictable behavior resulting in
re, explosion or risk of injury.
Do not disassemble the device. Take it to

6.
a qualied service person when service
or repair is required. Incorrect reassembly
may result in a risk of re or injury.

7.

Do not expose the device to re or
excessive temperature. Exposure to
extreme heat may cause explosion.

8.

Have servicing performed by a qualied
repair person using only identical
replacement parts. This will ensure that the
safety of the product is maintained.

9.

This device is not a toy.

***

KEEP OUT OF REACH OF CHILDREN***

FCC Statement:

This device complies with Part 15 of the

•

FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful

(1)

interference, and
This device must accept any interference

(2)

received, including interference that may
cause undesired operation.

Warning:

*

Changes or modications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.

WIRELESS CHARGING ENABLED
DEVICES:

iPhone 8/8Plus/Samsung Galaxy S8/S8+/
S7/S7 Edge/S6/S6 Edge, Nokia Lumia
1020/920/928, HTC 8X, HTC Droid DNA, HTC
Rzound, HTC Incredibly 4G LTE, Moto Droid
Turbo, Motorola Moto 360 Smart Watch, Moto
Droid Maxx, Droid Mini, Google Nexus 6/4/5/7
(2013), LG D1L, LG LTE2, LG G2 (Verizon),
Blackberry Z30 (Verizon)

MADE IN CHINA