Zebra Technologies MPACTINDR2 User Manual
MPACT LOCATION &
ANALYTICS
Hardware Installation Guide
MB1000 ATLS-T1B
MB2000 MPact-INDR1
MB3000 MPact-USB1
MB4000 MPact-OUTR1
GE-MB1000-01-WR
GE-MB2001-01-WR
GE-MB4001-01-WR
GE-MB5000-01-WR
GE-MB6000-01-WR Badge
GE-MB6000-CHRGR
MN00XXXXA01
TABLE OF CONTENTS
Chapter 1 MPact Bluetooth® Smart beacon Overview
Chapter 2 Beacon Hardware Specifications and Installation
2.1 MB1000 Beacon Part Number: MPACT-T1B20-000-WR ...............................................................................................2-1
2.1.1 Installing the Tie-Wrap Style Beacon ..................................................................................................................2-2
2.2 MB1000 Beacon Part Number: MPACT-T1B10-000-WR ...............................................................................................2-3
2.2.1 Mounting and Installing the Universal Style Beacon ..........................................................................................2-3
2.2.2 Beacon Battery Replacement ..............................................................................................................................2-5
2.3 MPACT-INDR1: MPACT-MB2000-01-WR, GE-MB2001-01-WR MPACT-INDR2: GE-MB1000-01-WR ........................2-6
2.3.1 Mounting and Installing the Indoor Style (MPACT-MB2000-01-WR) Beacon ....................................................2-6
2.3.2 Mounting and Installing a GE-MB2001-01-WR (TBD) .........................................................................................2-7
2.4 Beacon Operating Modes .............................................................................................................................................2-9
2.5 Beacon Battery Replacement ........................................................................................................................................2-9
2.5.1 Replacing Battery: MPACT-MB2000-01-WR and GE-MB2001-01-WR ...............................................................2-9
2.6 USB Beacon Part Number: MPACT-MB3000-01-WR ..................................................................................................2-10
2.6.1 Installing the USB Style Beacon ........................................................................................................................2-10
2.7 Beacon Part Numbers: MPACT-MB4000-01-WR, MPACT-MB4001-01-WR, GE-MB4000-01-WR and
GE-MB4001-01-WR ..................................................................................................................................................................2-11
2.7.1 Antennae Positions ............................................................................................................................................2-11
2.7.2 Mounting and Installing the Outdoor Style Beacon .........................................................................................2-12
2.8 Beacon Part Number: GE-MB1000-01-WR ..................................................................................................................2-15
2.8.1 Mounting a GE-MB1000-01-ACC model beacon using the Becon Accessory ..................................................2-15
2.9 Beacon Part Number: GE-MB2001-01-WR ..................................................................................................................2-16
2.10 Initializing a GE-MB5000-01-WR Hub .......................................................................................................................2-17
2.11 Beacon Part Number: GE-MB6000-01-WR Badge ....................................................................................................2-19
2.11.1 GE-MB6000-01-WR Battery Safety Precautions .............................................................................................2-20
2.12 Cradle Charger: MPACT-MB6000-CHRGR .................................................................................................................2-21
2.12.1 Battery Charging Guidelines ............................................................................................................................2-22
2.12.2 Cleaning the Charging Cradle ..........................................................................................................................2-23
2.12.3 Troubleshooting ...............................................................................................................................................2-24
4 MPact Location & Analytics Hardware Installation Guide
Appendix A Customer Support
ABOUT THIS GUIDE
This guide supports the following product families, parts and regulatory models:
6 MPact Location & Analytics Hardware Installation Guide
This chapter is organized into the following sections:
• Using the Documentation
• Zebra Technologies Corporation ("Zebra") End-User Software License Agreement
Using the Documentation
!
The following sections provide information about the document and notational conventions used in the guides, and provides a
list of related documentation.
Document Conventions
The following conventions are used in this manual to draw your attention to important information:
NOTE: Indicates tips or special requirements.
CAUTION: Indicates conditions that can cause equipment damage or data loss.
WARNING! Indicates a condition or procedure that could result in personal
injury or equipment damage.
7
Revision History
This guide has the following release and revision milestone history:July
Release Date Change
Revision A July, 2015 Initial release of document with new MPact beacons
added.
Revision A
(new baseline)
Regulatory Draft July 2016 GE version beacons and accessories added.
February, 2016 Outdoor beacon added. New Zebra template utilized.
8 MPact Location & Analytics Hardware Installation Guide
Notational Conventions
The following notational conventions are used in this document:
• Italics are used to highlight specific items in the general text, and to identify chapters and sections in this and related
documents
• Bullets (•) indicate:
• lists of alternatives
• lists of required steps that are not necessarily sequential
• action items
• Sequential lists (those describing step-by-step procedures) appear as numbered lists
Related Documentation
MPact Location and Analytics documentation includes the following:
• MPact Location & Analytics Deployment Guide
• MPact Location & Analytics Server Reference Guide
• MPact Location & Analytics Android Toolbox User Guide
• MPact Location & Analytics iOS Toolbox User Guide
• MPact Location & Analytics Client Software Development Kit
• MPact Location & Analytics Server API Reference Guide
• MPact Location & Analytics Hardware Installation Guide
Zebra Technologies Corporation ("Zebra") End-User Software License
Agreement
BY INSTALLING AND/OR USING THIS PRODUCT, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT,
UNDERSTAND IT AND AGREE TO BE BOUND ITS TERMS. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, ZEBRA
IS NOT WILLING TO LICENSE THE PRODUCT TO YOU, AND YOU MUST NOT INSTALL OR USE THIS PRODUCT.
Definitions
Grant of License
Zebra Technologies Corporation ("Zebra") grants you ("Licensee" or "you") a personal, nonexclusive, nontransferable, revocable,
nonassignable, limited license to use the software and documentation ("Product(s)") subject to the terms and conditions of this
Agreement. You shall use the Products only for your internal business purposes, exclusively to support Zebra devices. Any use
of the Products outside of the conditions set forth herein is strictly prohibited and will be deemed a breach of this Agreement
resulting in immediate termination of your License. In the event of a breach of this Agreement, Zebra will be entitled to all
available remedies at law or in equity (including immediate termination of the license without notice, immediate injunctive
relief and repossession of all Products unless Licensee is a Federal agency of the United States Government).
You shall not distribute, sublicense, rent, loan, lease, export, re-export, resell, ship or divert or cause to be exported, reexported, resold, shipped or diverted, directly or indirectly, the Products under this Agreement. You shall not, and shall not
permit others to: (i) modify, translate, decompile, bootleg, reverse engineer, disassemble, or extract the inner workings of the
Products, (ii) copy the look-and-feel or functionality of the Products; (iii) remove any proprietary notices, marks, labels, or logos
from the Products; (iv) rent or transfer all or some of the Products to any other party without Zebra's prior written consent; or
(v) utilize any computer software or hardware which is designed to defeat any copy protection device, should the Products be
equipped with such a protection device.
9
Title to all copies of Products will not pass to Licensee at any time and remains vested exclusively in Zebra. All intellectual
property developed, originated, or prepared by Zebra in connection with the Products remain vested exclusively in Zebra, and
this Agreement does not grant to Licensee any intellectual property rights.
Portions of the Products are protected by United States patent and copyright laws, international treaty provisions, and other
applicable laws. Therefore, you must treat the Products like any other copyrighted material (e.g., a book or musical recording)
except that you may make one copy of the Product solely for back-up purposes. Unauthorized duplication of the Products
constitutes copyright infringement, and in the United States is punishable in federal court by fine and imprisonment.
Limited Warranty
Zebra warrants for a period of ninety (90) days from your receipt of the Products to you that the Software, under normal use,
will perform substantially in accordance with Zebra's published specifications for that release level of the Software. The
written materials are provided "AS IS" and without warranty of any kind. Zebra's entire liability and your sole and exclusive
remedy for any breach of the foregoing limited warranty will be, at Zebra's option, the provision of a downloadable patch or
replacement code, or a refund of the unused portion of your bargained for contractual benefit up to the amount paid for the
Products.
Disclaimer
THIS LIMITED WARRANTY IS THE ONLY WARRANTY PROVIDED BY ZEBRA, AND ZEBRA MAKES, AND YOU RECEIVE, NO
OTHER WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR IN ANY COMMUNICATION WITH YOU.
ZEBRA SPECIFICALLY DISCLAIMS ANY WARRANTY INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILTY,
NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. ZEBRA DOES NOT WARRANT THAT THE PRODUCTS WILL
MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE PRODUCTS WILL BE UNINTERRUPTED OR ERROR FREE, OR
THAT DEFECTS IN THE PRODUCTS WILL BE CORRECTED. ZEBRA MAKES NO WARRANTY WITH RESPECT TO THE
10 MPact Location & Analytics Hardware Installation Guide
CORRECTNESS, ACCURACY, OR RELIABILITY OF THE PRODUCTS. Some jurisdictions do not allow the exclusion of implied
warranties, so the above exclusion may not apply to you.
Limitation of Liability
THE TOTAL LIABILITY OF ZEBRA UNDER THIS AGREEMENT FOR DAMAGES SHALL NOT EXCEED THE FAIR MARKET VALUE OF
THE PRODUCTS LICENSED UNDER THIS AGREEMENT. IN NO EVENT WILL ZEBRA BE LIABLE IN ANY WAY FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST
BUSINESS PROFITS, OR LIABILITY OR INJURY TO THIRD PERSONS, WHETHER FORESEEABLE OR NOT, REGARDLESS OF
WHETHER ZEBRA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some jurisdictions do not permit limitations
of liability for incidental or consequential damages, so the above exclusions may not apply to you. This Limitation of Liability
provision survives the termination of this Agreement and applies notwithstanding any contrary provision in this Agreement.
Licensee must bring any action under this Agreement within one (1) year after the cause of action arises.
Maintenance
Unless provided for in a separate agreement, Zebra shall not be responsible for maintenance or field service of the Products.
High Risk Activities
The Products are not fault-tolerant and are not designed, manufactured or intended for use or resale as on-line control software
in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or
communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of the
Products could lead directly to death, personal injury, or severe physical or environmental damage ("High Risk Activities"). Zebra
and its suppliers specifically disclaim any express or implied warranty of fitness for High Risk Activities, and if you elect to use
the Products in any High Risk Activities, you agree to indemnify, defend, and hold Zebra harmless from and against any and all
costs, damages, and losses related to that use.
U.S. Government
If you are acquiring the Products on behalf of any unit or agency of the U.S. Government, the following shall apply. Use,
duplication, or disclosure of the Products is subject to the restrictions set forth in subparagraphs (c) (1) and (2) of the Commercial
Computer Software - Restricted Rights clause at FAR 52.227-19 (JUNE 1987), if applicable, unless being provided to the
Department of Defense. If being provided to the Department of Defense, use, duplication, or disclosure of the Products is
subject to the restricted rights set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause
at DFARS 252.227-7013 (OCT 1988), if applicable. Products may or may not include a Restricted Rights notice, or other notice
referring specifically to the terms and conditions of this Agreement. The terms and conditions of this Agreement shall each
continue to apply, but only to the extent that such terms and conditions are not inconsistent with the rights provided to you
under the aforementioned provisions of the FAR and DFARS, as applicable to the particular procuring agency and procurement
transaction.
Assignment
Except as otherwise provided in this section, neither party may assign this Agreement, or any of its rights or obligations under
this Agreement, without the prior written approval of the other party, which will not be unreasonably withheld. Any attempted
assignment, delegation, or transfer without the necessary approval will be void. Notwithstanding the foregoing, for any Zebra
acquisition, merger, consolidation, reorganization, or similar transaction, or any spin-off, divestiture, or other separation of a
Zebra business, Zebra may, without the prior written consent of the other party: (i) assign its rights and obligations under this
Agreement, in whole or in part, or (ii) split and assign its rights and obligations under this Agreement so as to retain the benefits
of this Agreement for both Zebra and the assignee entity(ies) (and their respective Affiliates) following the split.
Governing Law
This Agreement shall be governed by the laws of the United States of America to the extent that they apply and otherwise by
the laws of the State of New York without regard to its conflict of laws provisions or by the internal substantive laws of the
country to which the Products is shipped if end-user customer is a sovereign governmental entity. The terms of the U.N.
Convention on Contracts for the International Sale of Goods do not apply. In the event that the Uniform Computer information
Transaction Act, any version of this Act, or a substantially similar law (collectively "UCITA") becomes applicable to a Party's
performance under this Agreement, UCITA does not govern any aspect of this End User License Agreement or any license
granted under this End-User License Agreement, or any of the parties' rights or obligations under this End User License
Agreement. The governing law will be that in effect prior to the applicability of UCITA.
Compliance with Laws
Licensee will comply with all applicable laws and regulations, including export laws and regulations of the United States.
Licensee will not, without the prior authorization of Zebra and the appropriate governmental authority of the United States, in
any form export or re-export, sell or resell, ship or reship, or divert, through direct or indirect means, any item or technical data
or direct or indirect products sold or otherwise furnished to any person within any territory for which the United States
Government or any of its agencies at the time of the action, requires an export license or other governmental approval. Violation
of this provision will be a material breach of this Agreement, permitting immediate termination by Zebra.
11
Third Party Software
The Products may contain one or more items of Third-Party Software. The terms of this Agreement govern your use of any ThirdParty Software UNLESS A SEPARATE THIRD-PARTY SOFTWARE LICENSE IS INCLUDED, IN WHICH CASE YOUR USE OF THE
THIRD-PARTY SOFTWARE WILL THEN BE GOVERNED BY THE SEPARATE THIRD-PARTY LICENSE.
Open Source Software
The Products may contain one or more items of Open Source Software. Open Source Software is software covered by a publicly
available license governed solely under Copyright law, whereas the complete terms and obligations of such license attach to
a licensee solely through the act of copying, using and/or distribution of the licensed software, such obligations often include
one or more of attribution obligations, distribution obligations, copyleft obligations, and intellectual property encumbrances.
The use of any Open Source Software is subject to the terms and conditions of this Agreement as well as the terms and
conditions of the corresponding license of each Open Source Software package. If there is a conflict between the terms and
conditions of this Agreement and the terms and conditions of the Open Source Software license, the applicable Open Source
Software license will take precedence. Copies of the licenses for the included Open Source Software, if any, as well as their
attributions, acknowledgements, and software information details, are provided in the electronic copy of this Agreement,
which is available in the Legal Notices or README file associated with the Product. Zebra is required to reproduce the software
licenses, acknowledgments and copyright notices as provided by the authors and owners, thus, all such information is provided
in its native language form, without modification or translation. Depending on the license terms of the specific Open Source
Software, source code may not be provided. Please reference and review the entire Open Source Software information to
identify which Open Source Software packages have source code provided or available. For instructions on how to obtain a
copy of any source code made publicly available by Zebra related to Open Source Software distributed by Zebra, you may send
your request (including the Zebra Product name and version, along with the Open Source Software specifics) in writing to: Zebra
Technologies Corporation, Open Source Software Director, Legal Department, 3 Overlook Point, Lincolnshire, IL 60069 USA.
©2015 ZIH Corp and/or its affiliates. All rights reserved. Zebra and the stylized Zebra head are trademarks of ZIH Corp.,
registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners.
12 MPact Location & Analytics Hardware Installation Guide
CHAPTER 1 MPACT BLUETOOTH®
SMART BEACON OVERVIEW
MPact utilizes Bluetooth® Smart beacons in various modes to unify Wi-Fi and Bluetooth® Smart Technology to capture
analytics, accuracy and insight.
Beacon placements can be adjusted within a deployment floor plan, and depending on the mode selected, their battery life can
be tracked over time. Administrators can cursor over a beacon on a site’s floor plan to assess the beacon’s remaining battery
life. This guide covers a variety of indoor, outdoor and USB type beacons, mounting options, and operational instructions for
each beacon type.
This guide includes the following:
Beacon Hardware Specifications and Installation
•
• MB1000 Beacon Part Number: MPACT-T1B20-000-WR
• MB1000 Beacon Part Number: MPACT-T1B10-000-WR
• MPACT-INDR1: MPACT-MB2000-01-WR, GE-MB2001-01-WR MPACT-INDR2: GE-MB1000-01-WR
• Beacon Battery Replacement
• USB Beacon Part Number: MPACT-MB3000-01-WR
• Beacon Part Numbers: MPACT-MB4000-01-WR, MPACT-MB4001-01-WR, GE-MB4000-01-WR and GE-MB4001-01-WR
• Beacon Part Number: GE-MB1000-01-WR
• Beacon Part Number: GE-MB2001-01-WR
• Initializing a GE-MB5000-01-WR Hub
• Beacon Part Number: GE-MB6000-01-WR Badge
• Cradle Charger: MPACT-MB6000-CHRGR
1 - 2 MPact Location & Analytics Hardware Installation Guide
1.1 Product and Part Compatibility Matrix
This guide supports the following product families, parts and regulatory models:
Figure 1-1 Product and Part Compatibility
Loading...