WT6300
Wearable Computer
Quick Start Guide
MN-004015-01EN
Copyright
WT6300 Wearable Computer Quick Start Guide
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in
many jurisdictions worldwide. Google, Android, Google Play and other marks are trademarks of Google
LLC. All other trademarks are the property of their respective owners. ©2020 Zebra Technologies
Corporation and/or its affiliates. All rights reserved.
COPYRIGHTS & TRADEMARKS: For complete copyright and trademark information, go to
www.zebra.com/copyright
.
WARRANTY: For complete warranty information, go to www.zebra.com/warranty
END USER LICENSE AGREEMENT: For complete EULA information, go to www.zebra.com/eula
Terms of Use
• Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries
(“Zebra Technologies”). It is intended solely for the information and use of parties operating and
maintaining the equipment described herein. Such proprietary information may not be used,
reproduced, or disclosed to any other parties for any other purpose without the express, written
permission of Zebra Technologies.
• Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs
are subject to change without notice.
• Liability Disclaimer
Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals
are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors
and disclaims liability resulting therefrom.
• Limitation of Liability
In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of
the accompanying product (including hardware and software) be liable for any damages whatsoever
(including, without limitation, consequential damages including loss of business profits, business
interruption, or loss of business information) arising out of the use of, the results of use of, or inability to
use such product, even if Zebra Technologies has been advised of the possibility of such damages.
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you.
.
.
2
Device Features
Figure 1 Front View
WT6300 Wearable Computer Quick Start Guide
15
14
13
12
11
10
9
8
1
2
3
4
5
6
7
Number Item Function
1 Speaker Provides audio output for video and music playback.
2
Battery
1
Provides power to the device.
3 Display Displays all information needed to operate the device.
4 Recent button Displays recently open applications.
5 Right interface connector Provides USB host and client communication, audio and device
charging via cables and accessories.
6 Home button Displays the Home screen.
7 Back button Displays the previous screen.
8 P3 button / Enter button Initiates Push-To-Talk communication (programmable).
Use as the Enter button when a keypad is attached.
9 P2 button Increases volume.
10 Microphone Use for communication on handset.
11 P1 button Decreases volume.
12 Power button Turns the display on and off. Press and hold to reset the device
and power off.
13 NFC antenna Provides communication with other NFC-enabled devices.
14 Ambient light sensor Determines ambient light for controlling display backlight
intensity.
15 Notification/Charge LED Indicates battery charging status while charging with USB
Charge cable and provide notifications from applications.
1
Standard Battery is shown.
3
WT6300 Wearable Computer Quick Start Guide
Figure 2 Rear View
16
17
Number Item Function
16 Cleat Provides alignment and secures the device to the wrist and
hip mounts.
17 Left interface
connector
Provides USB host and client communication, audio and
device charging via cables and accessories.
4
WT6300 Wearable Computer Quick Start Guide
Installing the Battery
To install the battery:
1. Insert the end of the battery into the battery well.
Figure 3 Standard Battery Installation
Figure 4 Extended Battery Installation
2. Press the battery down until it snaps into place.
5
WT6300 Wearable Computer Quick Start Guide
Replacing the Battery
To remove the battery:
1. Press the Power button to place the device in suspend mode.
2. Using finger tip, press the battery release latch toward the end of the battery.
Figure 5 Pull Release Latch Back on Standard Battery
Figure 6 Pull Release Latch Back on Extended Battery
3. Lift the battery out of the battery well.
Figure 7 Standard Battery Removal
6
WT6300 Wearable Computer Quick Start Guide
Figure 8 Extended Battery Removal
4. Insert the end of the battery into the battery well.
Figure 9 Standard Battery Installation
Figure 10 Extended Battery Installation
5. Press the battery down until it snaps into place.
7
Loading...