WT6000
Wearable Terminal
Quick Start Guide
MN-002700-03
Copyright
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many
jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2019 Zebra
Technologies Corporation and/or its affiliates. All rights reserved.
COPYRIGHTS & TRADEMARKS: For complete copyright and trademark information, go to
www.zebra.com/copyright
WT6000 Wearable Terminal Quick Start Guide
.
WARRANTY: For complete warranty information, go to www.zebra.com/warranty
END USER LICENSE AGREEMENT: For complete EULA information, go to www.zebra.com/eula
Terms of Use
• Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (“Zebra
Technologies”). It is intended solely for the information and use of parties operating and maintaining the
equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any
other parties for any other purpose without the express, written permission of Zebra Technologies.
• Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are
subject to change without notice.
• Liability Disclaimer
Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are
correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and
disclaims liability resulting therefrom.
• Limitation of Liability
In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the
accompanying product (including hardware and software) be liable for any damages whatsoever (including,
without limitation, consequential damages including loss of business profits, business interruption, or loss of
business information) arising out of the use of, the results of use of, or inability to use such product, even if
Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you.
.
.
2
Features
3
12
1
2
15
11
10
9
8
5
13
4
7
6
14
Figure 1 Front View
WT6000 Wearable Terminal Quick Start Guide
Table 1 Front View Descriptions
Number Item Function
1 Speaker Provides audio output for video and music playback.
2 Battery¹ Provides power to the device.
3 Display Displays all information needed to operate the WT6000.
4 Recent Button Displays recently open applications.
5 Right Interface Connector Provides USB host and client communication, audio and device
charging via cables and accessories.
6 Home Button Displays the Home screen.
7 Back Button Displays the previous screen.
8 P3 Button / Enter Button Initiates Push-To-Talk communication (programmable).
Use as the Enter button when a keypad is attached.
9 P2 Button Increases volume.
10 Microphone Use for communication on handset.
11 P1 Button Decreases volume.
12 Power Button Turns the display on and off. Press and hold to reset the device and
power off.
13 NFC Antenna Provides communication with other NFC-enabled devices.
¹ Standard battery is shown.
3
WT6000 Wearable Terminal Quick Start Guide
17
16
Table 1 Front View Descriptions (Continued)
Number Item Function
14 Ambient Light Sensor Determines ambient light for controlling display backlight intensity.
15 Notification/Charge LED Indicates battery charging status while charging with USB Charge cable
and provide notifications from applications.
¹ Standard battery is shown.
Figure 2 Back View
Table 2 Back View Descriptions
Number Item Function
16 Cleat Provides alignment and secures the WT6000 to the wrist and hip
mounts.
17 Left Interface
Connector
Provides USB host and client communication, audio and device
charging via cables and accessories.
4
WT6000 Wearable Terminal Quick Start Guide
Installing the Battery
To install the battery:
1. Insert the end of the battery into the battery well.
Figure 3 Standard Battery Installation
Figure 4 Extended Battery Installation
2. Press the battery down until it snaps into place.
5
WT6000 Wearable Terminal Quick Start Guide
Replacing the Battery
To remove the battery:
1. Press the Power button to place the WT6000 in suspend mode.
2. Using finger tip, press the battery release latch toward the end of the battery.
Figure 5 Pull Release Latch Back on Standard Battery
Figure 6 Pull Release Latch Back on Extended Battery
3. Lift the battery out of the battery well.
6
Loading...