Zebra Workabout Pro 3 Mobile Computer WA6127 / WA6128 No Loop Handstrap Instruction Sheet for Short Handheld English
Installation Instruction Workabout Pro S Handstrap
1. Installation
Assemble Handstrap to inserts shown on Workabout Pro S h an dheld.
Screws are M2.6 x 5mm Philips Driver, Fixed Flat Washer, with Black Oxide finish.
The screws should be tightened one-quarter turn beyond finger tight. (Or torque 2.5±0.25 in-lbs).
Do not use any thread locking compounds or adhesives.
Do not over tighten.
Pull down on strap and hook metal clip into lip on bottom of terminal as shown.
COMPANY HEADQUARTERS AND CANADIAN SERVICE CENT RE
PSION
2100 Meadowvale Boulevard, Mississauga
Ontario, Canada L5N 7J9
Tel: +1 905 813 9900
Fax: +1 905 812 6300
E-mail: salescdn@psion.com
www.psion.com
www.ingenuityworking.com
Page 1 of 1 Part No. 1003532 Revision B
Loading...