Zebra Workabout Pro 3 Mobile Computer WA6025 / WA6026 Double Loop Handstrap Instruction Sheet for Long Handheld English

Installation Instructions for Workabout Pro C Handstrap

1. Installation

 Assemble Handstrap to inserts shown on Workabout Pro C handhe ld.
 Screws are M2.6 x 5mm Philips Driver, Fixed Flat Washer, with Black Oxide finish.
 The screws should be tightened one-quarter turn beyond finger tight. (Or torque 2.5±0.25 in-lbs).
 Do not use any thread locking compounds or adhesives.
 Do not over tighten.
 Pull down on strap and hook metal clip into lip on bottom of terminal as shown.

COMPANY HEADQUARTERS AND CANADIAN SERVICE CENT RE

PSION
2100 Meadowvale Boulevard, Mississauga
Ontario, Canada L5N 7J9
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]

www.psion.com
www.ingenuityworking.com

Page 1 of 1

Part No. 1050265Revision C