September 27, 2010
Installation Instruction for ST6025 Double Loop Handstrap
1. Installation of the Double Loop Handstrap
HANDSTRAP INSTALLATION
ASSEMBLE THE SCREWS M3X6MM TO OMNII
HANDHELD. TIGHTEN TO 5.0 ±0.5 IN-LBS OR ONEQUARTER TURN BEYOND FINGER TIGHT. DO NOT
OVERTIGHTEN. PULL DOWN STRAP AND HOOK
METAL CLIP INTO SLOT AT BOTTOM AS SHOWN.
Page 1 of 2 Part No. 1005720 Revision A
STYLUS TETHER INSTALLATION ON DOUBLE LOOP HANDSTRAP
THREAD TETHER
LOOP THROUGH
2ND EYELET
DOWN ON
HANDSTRAP
STEP 1.
PULL REST OF
TETHER THROUGH
THE LOOP UNTIL
THE KNOT IS SNUG
STEP 3.
COMPANY HEADQUARTERS AND CANADIAN SERVICE CENT RE
PSION TEKLOGIX
2100 Meadowvale Boulevard, Mississauga
Ontario, Canada L5N 7J9
Tel: +1 905 813 9900
Fax: +1 905 812 6300
E-mail: salescdn@psion.com
PUSH STYLUS
THROUGH TETHER
STEP 2.
Page 2 of 2 Part No. 1005720 Revision A
Loading...