Docking Station ST4002 or ST4003
This Guide
FEATURESCONTENTS OF THE BOX
OPERATION
The ST4002 and ST4003 Desktop Docking Stations both
feature:
> Fast charging of the Omnii internal battery.
> Fast charging of the spare battery pack.
> A Host USB port to connect peripherals such as a
printer, keyboard, etc.
> A Client USB port to connect the docking station to a PC.
The ST4003 Desktop Docking Station additionally provides:
> A DE9M serial port (unpowered).
> An RJ45 10Base-T Ethernet interface. Both these interfaces
are compatible with the USB to Ethernet/serial drivers included in Omnii.
FEATURES GETTING STARTED
BACK AND BATTERY CHARGE WELL
Docking connector
Omnii compartment
Battery connector
Spare battery
charge well
Choose a plug for the Universal Power Adaptor.
1
1. Press the button on the power adaptor to release the plug.
2. Slide the existing plug out of the adaptor.
3. Slide the desired plug into the adaptor until it clicks.
Insert Omnii to charge its battery.
2
Slide Omnii into the Docking Station until it latches.
USB Micro-B to Type A cable
Omnii Accessories
Regulatory & Warranty Guide
ST1050 AC Power Supply with regional adaptors
FRONT
Spare battery
charge well
Omnii compartment
Docking connector
Release button
Locking arm
LED indicator
REAR PORTS
ST4002
Host USB
port
Client USB
port
DC In port
Host USB port
DE9M serial port
ST4003
Client USB port
RJ45 Ethernet port
Note: Use only the universal AC power supply approved by Psion for
use with the Docking Station.
OVER
>
8 0 0 0 2 0 3
Insert the spare battery.
3
Place the battery contacts down to mate with the connector, then
pivot the battery into place in the battery charge well.
CONNECTING THE DOCKING STATION TO
A HOST COMPUTER
Omnii acts as a USB Client in the Docking Station.
> During charge, the LED indicator on Omnii
fl ashes GREEN.
> When fi nished charging, the indicator
displays solid GREEN.
> The LED indicator on the Docking Station
behaves the same when a spare battery is being
charged.
Allow Omnii and the spare battery to charge for 3-4
4
hours before fi rst use.
The spare battery may require an extra 4 hours to charge if an
Omnii is also docked.
Note: Full battery performance is only
reached after the fi rst few
charge/discharge cycles.
0 - 40 °C
32 - 104 °F
Docking Station Battery Charge LED Behaviour
Charge LED Behaviour Function
OFF No battery detected.
Solid Green Battery charging complete.
Flashing Green Charge in progress.
Flashing Yellow Battery is not charging due to out-of-temper-
Solid Red Unable to read battery or non Psion battery.
ature conditions.
3-4 h
1. Connect the smaller end of the USB cable to the Docking Station (ST4002 shown).
2. Connect the fl at end of the USB cable to the host computer.
IEC320-C13
power cord
USB host computer
ST1050 power supply
USB Micro-B to Type A cable
DESKTOP DOCKING
STATIONS
QUICK START
GUIDE
© Copyright 2011 by Psion Inc.
2100 Meadowvale Boulevard, Mississauga, Ontario, Canada L5N 7J9
http://www.psion.com
Psion, the Psion logo, and the names of other products and services provided by
Psion are trademarks of Psion Inc. All trademarks used herein are the property of
their respective owners.
August 2, 2011
PN 8000203.C
ISO 9001 Certifi ed
Quality Management System
Loading...