Zebra 8585 Vehicle-Mounted Computer Installation Instruction for MT3608 Keyboard Bracket English

Legend:

A

Keypad Bracket

B

4x 8/32 Philips Screw

C

Ikey Keyboard (Not supplied in
Kit)

D

Keyboard Cable

E

6x Screws M6 x 12 Hexagon

F

6x Flat Washer

G

8585/95 Vehicle Mount Terminal
(Not supplied in Kit)

Step 2: Connect the Ikey Keyboard cable (D)

Step 1: Align holes in Ikey keyboard (C) with

Figure 3

Step 3:

Figure 2

Figure 1

Installation Instruction for MT3608 Keyboard Bracket

Installation

long slots in the Keypad Bracket (A). Apply
Loctite 243 (not supplied by Psion) to threads of
screws (B) and loosely secure the keyboard with
four 8/32 philips head screws (B). It must be
adjusted later (when mounting the 8585/8595 to
the Keypad Bracket).

See Figure 1

to the 8585/8595 Vehicle Mount Terminal (G).

(A) to the 8585/8595 (G) using six M6 x 12
Screws (E) with the six Flat Washers (F).
Torque to 18 lbf-in.

See Figure 2 and 3.

Step 4: Adjust the Ikey Keyboard (C) fully

tighten the four 8/32 Philips head screws (B).
Torque to 9 lbf-in.

Now assemble the Keypad Bracket

Part No. 1616803 Revision B

1 of 2

Sheet

Note:

the 8585/95 Vehicle Mount Terminal. This interface is protected
from atmospheric influences by an IP65 cable cover. The cable
cover must be removed and reinstalled correctly when connecting
the interface cables. Please ensure you attach the cable cover as per
8585/8595 Vehicle Mount User Manual, complying with Protection
Standards IP65. The protection class can no longer be guaranteed if
the cable cover is installed incorrectly.

The Ikey Keyboard uses a USB/PS2 interface to connect to

Appendix A: Support Services

For technical support, please visit: http://zebra.com/support

Part No. 1616803 Revision B

Sheet

2 of 2