Zanussi ZWF 1430 S, ZWF 1430 W, ZWF 1630 W User Manual 2

WASHING MACHINE

ZWF 1230 W - ZWF 1430 W

ZWF 1430 S - ZWF 1630 W

1400 900 700 500

Delicates

60°C 50°C

95°C

40°C

Extra Quick

Prewash

Prewash Wash Rinses Spin

Drain

30°C

Wool

On/Off

Cottons

Synthetics

Outdoor Sports

Super Rinse

Delay

40° AA

Skip

Handwash

Start/ Pause

Rinse Hold

Reset

Temp.

Spin

ZWF 1430 S

HYDROSYSTEM 5.5 kg

PROGRESS 1400

INSTRUCTION BOOKLET

132989150

Ofrecido por www.electromanuales.com

132989150.qxd 13/03/2004 09.00 Pagina 1

Installation

●

This appliance is heavy. Care should be taken when moving it.

●

It is dangerous to alter the specifications or attempt to modify this product in any way.

●

All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions.

●

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

●

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

●

Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

●

If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.

Child Safety

●

This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.

●

Pets and children have been known to climb into washing machines. Please check your drum before use.

●

The glass door becomes very hot during the washing cycle. Keep children away from the vicinity of the appliance whilst it is in operation.

●

Keep all packaging well away from children.

●

Keep all detergents in a safe place out of children’s reach.

Use

●

Always unplug the appliance and turn off the water supply after use.

●

Do not overload the appliance. See relevant section in the instruction book.

●

Only wash fabrics which are designed to be machine washed. If in doubt, consult the care label on the clothes.

●

Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.

●

Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.

●

Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.

●

Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.

●

Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.

●

As some duvets and eiderdowns should be washed in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine.

●

Leave the porthole door slightly ajar between washes to preserve the door seal.

●

Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

Important Safety Information

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.

These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.

Ofrecido por www.electromanuales.com

132989150.qxd 13/03/2004 09.00 Pagina 2

Contents

For the User

Important Safety Information

Your New Washing Machine

Description of the Appliance

5 Detergent dispenser drawer 5 Child safety feature 5

The Control Panel

6-9

Turning the acoustic signal off 6

Operating sequence

10-12 Load the laundry 10 Measure out the detergent 10 Measure out the fabric softener 10 Switch the machine on 10 Select the required programme/fabric 10 Select the temperature 11 Select the spin speed or the Rinse Hold option 11 Select the desired options 11 Select the SUPER RINSE or AA40° option 11 Select the DELAY START 11 Start the programme 12 How to change a programme during its cycle 12 How to cancel a programme during its cycle 12 How to open the door during the cycle of a programme 12 End of programme 12

Washing Hints

13-14

Which detergent?.... 14

And in which form? 14

Wash Care Symbols

Washing Programmes

Maintenance and Cleaning

17-18 Descaling 17 After each wash 17 Maintenance Wash 17 External cleaning 17 Cleaning the dispenser drawer 17 Cleaning the drawer recess 17 Cleaning the pump 17-18 Cleaning the water inlet filter 18 The dangers of freezing 18 Emergency emptying out 18

Something Not Working

19-20

Service and Spare Parts

Guarantee Conditions

For the Installer

Installation Instructions

Technical Specifications

Unpacking 23 Positioning 23 Water inlet 24 Water drainage 24-25 Levelling 25 Special conditions 25 In the interest of the environment 25 Electrical connection 26

Guide to use the Instruction Book

The following symbols will be found in the text to guide you throughout the instructions:

Safety instructions Hints and tips Environmental information

Ofrecido por www.electromanuales.com

132989150.qxd 13/03/2004 09.00 Pagina 3

Your New Washing Machine

Your new washing machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.

Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type of fabric.

●

Automatic cooling of the wash water to 60°C

before draining, with the 95°C programme. This reduces thermal shock to fabrics, helping to prevent creasing.

●

The special wool programme with its new delicate wash system treats your woollens with extreme care.

●

The anti-unbalance device ensures that the washing machine remains stable when spinning.

Ecological hints

To save water and energy and help protect the environment, we recommend that you follow these hints:

●

Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).

●

The machine works more economically if it is fully loaded.

●

With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.

●

Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed.

In the interest of the environment

●

Materials marked with the symbol are recyclable.

●

Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.

●

When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside.

●

Help to keep your country tidy - use authorised disposal sites for your old appliance.

How do we help to protect the environment? We use recycled paper!

Important

Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.

If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the wash load manually and select a spin programme. For more detailed information see the section headed “Something Not Working”.

Ofrecido por www.electromanuales.com

132989150.qxd 13/03/2004 09.00 Pagina 4

Description of the Appliance

1 Detergent dispenser drawer

2 Control panel

3 Door opening handle

4 Drain pump

5 Adjustable feet

Detergent dispenser drawer

Prewash

Main wash

Fabric softener

Child safety feature

This machine incorporates a special child safety feature to prevent small children from being trapped inside the machine. To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical.

Ofrecido por www.electromanuales.com

132989150.qxd 13/03/2004 09.00 Pagina 5

ZWF 1430 S

Prewash

95°C

1400

Cottons

900

Synthetics

60°C

700

50°C

Delicates

40°C

500

Wool

On/Off

30°C

Rinse Hold

Handwash

m e T

Prewash Wash

Super

Outdoor

Rinses

Delay

Rinse

Sports

Spin

Start/

Extra

Skip

Drain

40° AA

Pause

Quick

Reset

PROGRESS 1400

HYDROSYSTEM 5.5 kg

C0063

P1131

1 “On/Off” button

Press this button to switch the washing machine on. The display (8) will show three blinking dashes or a blinking zero. You will find more detailed explanations on pages 7-8 (see “DISPLAY”). Press the On/Off button again to switch the machine off.

2 MAINS-ON light

This light is connected to the “On/Off” button. It lights up when you press the button, and goes out when you press it again.

3 FABRICS button

Press this button repeatedly to select the programme on the basis of the type of laundry to be washed. The light relevant to the selected programme will light up. The washing machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating buttons 4 and 5.

Hand wash

When you select this programme, you obtain a particularly delicate washing, suitable for articles of clothing whose label indicates that they must be handwashed .

4 “Temp.” button

Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine. The relevant light will light up. Maximum temperatures are 95°C for cotton, 60°C for synthetic fabrics, 40°C for delicate fabrics, wool and fabrics to be hand-washed (Handwash programme).

The Control Panel

123456789101112

1400

900

700

500

Delicates

60°C

50°C

95°C

40°C

Extra

Quick

Prewash

Wash

Rinses

Spin

Drain

30°C

Wool

On/Off

Cottons

Synthetics

Outdoor Sports

Super Rinse

Delay

40° AA

Skip

Handwash

Start/

Pause

Rinse Hold

Reset

Temp.

Spin

ZWF 1430 S

5 “Spin” button

Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up.

Maximum speeds are:

• for cotton: 1,600, 1,400 or 1,200 rpm depending on the model;

• for synthetic fabrics, wool and fabrics to be handwashed: 900 rpm;

• for delicate fabrics: 700 rpm.

RINSE HOLD position: when you choose this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry. At the end of the cycle, the door is locked, the light of the “Start/Pause” button goes out, the pilot light of “Rinse Hold” position remains lit, to indicate that the water must be drained. To complete the cycle, choose one of the following options:

• Drain:

Press “Skip Reset” button once, all the leds are off, the display will show three blinking dashes, then press FABRIC button in order to select the desired programme. If you wish to drain or spin press the “Skip Reset” button until the led of the desired function goes on.

IMPORTANT!

By pressing the “Temp.” and “Spin” buttons simultaneously, the acoustic signal is deactivated at the end of the cycle, when selecting the programmes and in case of an incorrect option selection . By pressing these 2 buttons again the acoustic signal is reactivated.

Ofrecido por www.electromanuales.com

132989150.qxd 13/03/2004 09.00 Pagina 6

You can change the spin speed by means of “Spin” button and then depress Start/Pause .

Important! If you accidentally press the “Skip Reset” button more than once, the display will show three blinking dashes. To drain the water, select any washing programme by means of the FABRICS button, then press “Skip Reset” three times in order to select the drain (only the “drain” light will remain lit).

6 WASH CHOICE button

Press this button to select the following options:

• Prewash: select this option if you wish your laundry to be prewashed before the main wash (not available

for wool and hand-wash cycle).

The prewash ends with a short spin at 650 rpm in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained.

• Outdoor Sports: select this option if you wish to perform a soak of about 30 minutes at 30°C to your laundry. By pressing the DELAY START button the soak time can be prolonged up to 10 hours max. After this time the wash cycle will automatically start.

This function is not available for wool and hand-wash cycle. The soak ends with a short spin at 650 rpm in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained.

• Extra Quick: select this option for laundry that is

only slightly soiled (not for Wool and Handwash

programme).

The washing time will be reduced according to the type of fabric and the selected temperature.

The Prewash, the Outdoor Sport and the Extra Quick options cannot be selected together.

7 OPTIONS button

Press this button to select the following options:

• Super Rinse: this option can be selected with all programmes except the wool programme and hand wash. The machine will add 2 rinses to the selected programme. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft.

• 40° AA: this option can be selected for cottons and

synthetics lightly or normally soiled with a temperature of 40°C or higher.

If you select 40°C together with option 40° AA, the machine will prolong the time at 40°C in the washing phase. On cotton programme this will allow an A class in energy efficiency and washing performance to be achieved. If you select 95°C, 60°C or 50°C and press the 40° AA button, the washing temperature will be reduced and the washing time will be prolonged.

The Super Rinse and the 40° AA options cannot be selected together by means of the relevant button.

8 Display

The following pieces of information are shown on the display:

• Three blinking dashes, when a programme is cancelled by means of the Skip Reset button.

The three blinking dashes will also appear when you press the On/Off button to switch the machine on, if the previously selected cycle has been erased.

•

Duration of washing programme in hours and

minutes, after you have selected a programme.

While the programme is running (after you have

pressed the Start/Pause button), the displayed time value decreases by one unit every minute.

• The washing machine has stopped with water in the tub, at the end of a programme with the Rinse Hold option: this is indicated by a flashing zero.

• The washing machine has completed the programme: this is indicated by a blinking zero. The zero will reappear when you switch the washing machine on, unless the previous programme has been erased by means of the Skip Reset button.

Important!

The first time you use the washing machine, when

you switch it on, it may display a blinking zero and give an audible warning signal. This is due to the fact that the washing machine has performed a washing cycle during the manufacturer’s inspection tests, and this cycle has not been erased after its completion.

Ofrecido por www.electromanuales.com

132989150.qxd 13/03/2004 09.00 Pagina 7

---

• Delay start, a time value indicated in hours and selected by means of the relevant button.

The delay time is displayed for 3 seconds, then the duration of the selected programme reappears. After you have pressed the Start/Pause button, the countdown begins, and the delay time value decreases by one unit every hour. You can delay the start of the selected programme by up to 23 hours in one hour intervals.

• An incorrect option selection has been made: this is indicated by the message Err when a function incompatible with the current programme is selected.

The incorrect selection is also indicated by an audible warning signal.

• An alarm code indicates a fault in the machine operation (see the relevant chapter on page 19).

9 START/PAUSE button

This button has two functions:

• Start: after you have selected the desired programme

and options, press this button to start the washing machine. The light above the button will stop flashing and remain lit.

If you have selected a delay time by means of button 11, the countdown will begin and will be shown on the display.

• Pause: when you press this button again, the programme in progress is interrupted. The light above the button will start flashing. To restart the programme, press the button again.

When you PAUSE the cycle, and it becomes possible to open the door, provided

• the washing machine is not in the heating phase;

• the level of the water is not high;

• the drum is not turning.

Important! You must set the washing machine to Pause before you make any change in the programme in progress.

10 SKIP/RESET button

This button performs two functions:

- Clears the memory

- Selects special programmes

At the end of every programme the Reset button must be pressed once or repeatedly to clear the programme memory. This will be confirmed by three dashes, flashing in the display. If the previous programme is not cleared, the display will show a “

0” flashing and an audible signal will

sound, when you switch the machine on.

Selecting a special programme:

A wash programme must be selected in the normal way. (Start button not pressed)

The SKIP button is then used to cancel or advance the programme to the required phase. The SKIP button can only operate when the programme is in pause. A normal wash cycle consists of the following phases, Wash - Rinses - Spin and is confirmed by the illumination of the corresponding LED,s.

Ofrecido por www.electromanuales.com

132989150.qxd 13/03/2004 09.00 Pagina 8

E20

To select rinses & spin, the programme must be paused, now press the Skip button once, the wash LED goes out.

To select spin only, the programme must be paused, now press the Skip button twice. The wash & rinses LED,s go out.

To select Drain the programme must be paused, now press the Skip button three times, the wash - rinses - spin LED,s go out.

11 DELAY START button

This button makes it possible to delay the starting of the programme by up to 23 hours. The delay you have selected is shown on the display for about 3 seconds; afterwards, the duration of the programme reappears.

If the button Outdoor Sports has been pressed the selected delay will correspond to the soak time. If no delay time is selected the soak programme will last about 30 minutes.

You must select this option after you have set the programme and before you press the Start/Pause button. The time value shown on the display will decrease by one unit every hour.

You can change the delay time at any moment, before you press the Start/Pause button. If you have already pressed the Start/Pause button, and you wish to change or cancel the delay time, proceed as follows:

• set the washing machine to Pause by pressing the Start/Pause button;

• press the DELAY button until the display shows the desired delay time or

• press the DELAY button once, to erase the delay time. The display will indicate “00’”.

• press the Start/Pause button again.

Important!

The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to Pause by pressing the Start/Pause button. After you have closed the door, press the Start/Pause button again.

12 Programme phase indicator

lights

When you select a programme, the lights relevant to the phases that form the programme light up.

After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.

Ofrecido por www.electromanuales.com

132989150.qxd 13/03/2004 09.00 Pagina 9

Prewash

Wash

Rinses

Spin

Drain

Prewash

Wash

Rinses

Spin

Drain

Prewash

Wash

Rinses

Spin

Drain

Prewash

Wash

Rinses

Spin

Drain

+ 18 hidden pages