It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move
house and leave the appliance, always ensure that the book is supplied with the appliance in
order that the new owner can get to know the functioning of the appliance and the relevant
warnings.
These warnings have been provided in the interest of safety. You MUST read them carefully
before installing or using the appliance.
●
Installation
●
This appliance is heavy. Care should be taken when
moving it.
●
It is dangerous to alter the specifications or attempt
to modify this product in any way.
●
All packing and transit bolts must be removed before
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section
in instructions.
●
Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
●
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
●
Care must be taken to ensure that the appliance does
not stand on the electrical supply cable.
●
If the machine is situated on a carpeted floor, please
adjust the feet in order to allow air to circulate freely.
Child Safety
●
This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.
●
Pets and children have been known to climb into
washing machines. Please check your drum before
use.
●
The glass door becomes very hot during the washing
cycle. Keep children away from the vicinity of the
appliance whilst it is in operation.
Keep all packaging well away from children.
●
Keep all detergents in a safe place out of children’s
●
reach.
Use
●
Always unplug the appliance and turn off the water
supply after use.
Do not overload the appliance. See relevant section
in the instruction book.
●
Only wash fabrics which are designed to be machine
washed. If in doubt, consult the care label on the
clothes.
●
Before washing, ensure that all pockets are empty
and buttons and zips are fastened. Avoid washing
frayed or torn articles and treat stains such as paint,
ink, rust, and grass before washing. Underwired bras
must NOT be machine washed.
●
Any objects such as coins, safety pins, nails, screws,
stones or any other hard, sharp material can cause
extensive damage and must not be placed into the
machine.
●
Garments which have been in contact with volatile
petroleum products should not be machine washed.
If volatile cleaning fluids are used, care should be
taken to ensure that the fluid is removed from the
garment before placing in the machine.
●
Wash small items such as socks, laces, washable
belts etc in a washing bag or pillow case as it is
possible for such items to slip down between the tub
and the inner drum.
●
Only use the advised quantities of fabric softener.
Damage to the fabric can ensue if you over-fill.
Refer to the manufacturer’s recommendations of
quantities.
●
As some duvets and eiderdowns should be washed
in large commercial machines because of their bulk,
please check with the manufacturer of the item
before washing in a domestic machine.
●
Leave the porthole door slightly ajar between washes
to preserve the door seal.
●
Under no circumstances should you attempt to repair
the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local Service Force
Centre. Always insist on genuine spare parts.
2
Contents
For the User
Important Safety Information
Your New Washing Machine
Description of the Appliance
Detergent dispenser drawer5
Child safety feature5
The Control Panel
Programme information 12
Operating Sequence
Washing 6 kg13
Load the laundry13
Measure out the detergent and the fabric softener13
Switch the machine on13
Switching the machine on for the first time13-14
Select the desired programme/fabric14
Select the temperature 14
Select the Spin Speed, the Rinse Hold or the Night
Cycle option14
Select the desired options14
Select the Delay Time15
Start the programme15
How to change an option or a programme
during its cycle15
Cancelling a programme15
How to open the door during the cycle of a
programme15
End of programme16
Washing Hints
Which detergent?....18
And in which form?18
6-11
13-16
17-18
Wash Care Symbols
Washing Programmes
2
Maintenance and Cleaning
4
Descaling22
After each wash22
5
Maintenance Wash22
External cleaning22
Cleaning the dispenser drawer22
Cleaning the drawer recess22
Cleaning the pump22-23
Cleaning the water inlet filter23
The dangers of freezing23
Emergency emptying out23
Something Not Working
Service and Spare Parts
Guarantee Conditions
For the Installer
Installation Instructions
Technical Specifications
Unpacking28
Positioning28
Installation on a suspended floor28
Water inlet29
Water drainage29-30
Levelling30
Special conditions30
In the interest of the environment30
Electrical connection31
Permanent connection31
19
20-21
22-23
24-25
25
26
27
27
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
3
Your New Washing Machine
Your new washing machine, which is fitted with the New Jet System, meets all modern
requirements for effective treatment of laundry with low water, energy and detergent
consumption.
●
The special Handwash and Silk programmes with
their new delicate wash system treats your delicate
items with extreme care.
●
The special Wool programme with its new delicate
wash system treats your woollens with extreme care.
●
The automatic cooling of the washing water from
90° to 60°C before draining will prevent old drain
pipes from being deformed.
●
The balance control device ensures the machine is
stable during the spin.
Ecological hints
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
●
Adjust the quantity of detergent according to the
hardness of your water supply, the amount of
laundry and the degree of soiling.
●
A programme without prewash is sufficient for
normally soiled laundry.
●
The machine works more economically if it is fully
loaded.
●
With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature, so saving energy.
In the interest
of the environment
●
Materials marked with the symbol are
recyclable.
●
Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.
●
When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.
●
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. For more detailed information about
recycling of this product, please contact your local
city office, your household waste disposal service or
the shop where you purchased the product.
How do we help to protect the environment?
We use recycled paper!
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the
wash load manually and select a spin programme. For more detailed information see the section headed "Something
Not Working".
4
Description of the Appliance
01 Detergent dispenser drawer
02 Control panel
03 Door opening handle
04 Drain pump
05 Adjustable feet
1
JETSYSTEM
Gentle Spin
7 kg
TIMELINE
1400
2
OFF
1
Cottons
M
e
m
o
r
y
2
Cottons Economy
M
e
m
o
r
y
3
Synthetics
M
e
m
o
r
y
Delicates
Spin
Handwash
Drain
Wool
Rinses
Silk
Mini 30
Temp. Spin
Start/
Pause
Change
Options
Exit
ZWF 1451 W
3
4
5
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
To disable this device and restore the possibility of
closing the door, rotate the button anti-clockwise until
the groove is vertical.
P1206
P1131
5
The Control Panel
Change
Options
Exit
1234567
Temp.Spin
Memory
3
Cottons Economy
OFF
Cottons
Synthetics
Delicates
Handwash
Wool
Silk
Mini 30
Rinses
Drain
Spin
Gentle Spin
Memory
2
Memory
1
ZWF 1451 W
Start/
Pause
7 kg
1400
TIMELINE
JETSYSTEM
1 Detergent dispenser drawer
2 Programme selector dial
The selector dial is divided into the following sections:
• Handwash, Wool, Silk 30 and Mini 30 (dark gray
colour
)
• Rinses, Drain, Spin and Gentle Spin (dark gray
colour
)
• Memory 3, Memory 2, Memory 1 (green colour)
•Off
Off
1
Memory
2
Memory
3
Memory
Gentle Spin
Spin
Drain
Rinses
Mini 30
Silk
The selector dial can be turned either clockwise or
anticlockwise.
Position “Cottons Economy” corresponds to the
ENERGY SAVING programme for cotton and position
“Off” to Reset programme/Switching off of the
machine.
At the end of the programme the selector dial must be
turned to position Off, to switch the machine off .
Attention!
If you turn the programme selector dial to another
programme when the machine is working, a warning
message appears for 4 seconds on the display while the
buzzer sounds 3 times .
), Synthetics (green colour) and
)
Cottons
Cottons Economy
Synthetics
Delicates
Handwash
Wool
3 Display
The Display is used for setting a large number of
functions and combine them with each other using only
a few control elements (1 programme selector dial and 6
buttons). This simple control method is made easy
thanks to the interactive display .
Interactive means that the washing machine display
changes to reflect each step you have entered. This
ensures that only those settings that make sense are
made. You are able to see the current settings at any
time in the information panel and in the option row .
123
Cotton
Cycle and at
90°C 1400
Temp.Spin
4
Options
Change
08.30
10.55
Exit
1. Information panel shows the current settings
2. Real time clock
3. End cycle time
4. Selection shows temperature, spin speed, options
and extras.
4 Temperature button
“Temp.”
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
washing machine.
Maximum temperatures are 90°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
fabrics to be hand-washed, 30°C for Silk 30 and «Mini
30», while «
00
» corresponds to cold wash.
6
By depressing Temperature “Temp.” button, the
relevant message will appear on the second row of the
display (instead of «cycle end at»). In the corner of the
third row appears the indication of the selected
temperature.
5 Spin speed button “Spin”
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the washing machine.
On cotton and synthetic programmes the rinses will be
performed with more water.
To complete the cycle, choose one of the following
programmes:
• Drain
To drain the water select “Drain” programme by means
of the selector dial, then press the “Start/Pause” button.
• Spin
To spin the laundry choose “Spin” or “Gentle Spin”
programme by means of the selector dial; select spin
speed by means of Spin button and then press the
“S tart/Pause” button.
Important!
Before choosing the programme “Drain”, “Spin” or
“Gentle Spin” the selector dial has to be positioned on
“Off”.
6 «Options», «Change» and
«Exit» buttons
COTTON
MAX 1400
1400
Temp.Spin
Options
Change
08.30
10.55
Exit
Maximum speeds are:
• for cotton:1400 rpm
• for synthetic, wool,
and fabrics to be handwashed: 900 rpm;
• for delicates, «Silk 30» and «Mini 30»: 700 rpm;
By depressing the Spin speed button you can also
choose No Spin option «
00
», Rinse Hold option and
Night cycle option .
No spin «
00
» option eliminates all the spin phases and
increases the number of rinses for cottons and
synthetics.
Rinse hold position : when you choose this option,
the machine will not drain the water of the last rinse, so
as not to crease the laundry.
Night cycle position : when you choose this option,
the machine will not drain the water of the last rinse, so
as not to crease the laundry.
As all spinning phases are suppressed, this washing
cycle is very quiet and it can be selected at night or in
times with a more economical power rate.
Options button allows you to move through the option
icons.
Extra Rinse
No10.55
Temp.Spin
Options
Change
Exit
Change button allows you to select/change the status of
the different icons.
Extra Rinse
Yes10.55
Temp.Spin
Options
Change
Exit
7
Exit button allows you to return to the previous
selection.
COTTON
CYCLE END AT
60°C 1400
Temp.Spin
Options
Change
08.30
10.55
Exit
DELAY START: this option makes it possible to
delay the start of the washing programme by 30 min 60 min - 90 min, 2 hours and then by 1 hour till 20
hours. The delay you have selected is indicated in the
display .
Depending on the programme, different functions can
be combined. These must be selected after choosing the
desired programme and before depressing the
“S tart/Pause” button.
By depressing the Options button, all the symbol icons,
allowed for the selected programme will appear in the
display .
The first option will start flashing. Its name and
status will appear in the display.
If you want to change the option status, press Change
button. A line will appear below the selected icon,
indicating that the option is set.
To select the other options press again the Options
button and proceed as before.
Once you have completed the selection of the options,
pressing the Exit button, the selected icons will remain
fixed in the display.
Note: To modify the already chosen option selections,
repeat the previous procedure.
Important! While selecting the option, if you press the
temperature T emp., Spin, or “S tart/Pause” button, the
relative function will be executed.
EXTRA RINSE: this option can be selected with
all programmes, except the wool/handwash programmes
and «Mini 30» programme. The machine will add 2
rinses for cottons and 1 rinse for synthetics, delicates
and silk.
This option is recommended for people who are allergic
to detergents, and in areas where the water is very soft.
TIME SAVING: this option can be used for lightly
soiled cotton, synthetic or delicates items in order to
obtain a good washing programme in a short time. The
washing time will be reduced according to the type of
fabric and the selected temperature. Selecting this option
«Short» or «Very Short» will be shown in the display.
Delay Start
No10.55
Change
Temp.Spin
Options
Exit
Delay Start
Start in 30 min11.25
Temp.Spin
Options
Change
Exit
You must select this option after you have set the
programme and before you press the “Start/Pause”
button.
You can cancel the delay time at any moment, before
you press the “Start/Pause” button. If you have already
pressed the “Start/Pause” button and you wish to
cancel the Delay time proceed as follows:
1. set the washing machine to PAUSE by pressing the
“S tart/Pause” button;
2. deselect the Delay start option, changing the status;
3. press the “S tart/Pause” button to start the
programme.
Important!
The selected delay can be changed only after selecting
the washing programme again.
The door will be locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
“S tart/Pause” button. After you have closed the door,
press the “Start/Pause”button again.
The Delay Start cannot be selected with “Spin”,
“Gentle Spin” and “Drain” programmes.
PREWASH: select this option if you wish your
laundry to be prewashed before the main wash (not
available for wool and handwash cycle, «Mini 30» and
«Silk 30»).
The prewash phase ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas in
the programme for delicate fabrics the water is only
drained.
INTENSIVE: for heavy soiled laundry. This
option can be selected only for cottons and synthetics.
The washing time will be prolonged according to the
8
cycle temperature and the fabric type.
EASY IRON: selecting this button the laundry is
gently washed and spun to avoid any creasing. In this
way ironing is easier. Furthermore the machine will
perform 6 rinses instead of 3 for cotton and 4 rinses
instead of 3 for synthetics. This function can be used for
cotton and synthetic fabrics. If this option is selected for
cotton programmes, the spin speed automatically will
reduce to 1000 rpm.
ENERGY SAVING: this option can be selected
only for synthetics lightly or normally soiled with a
temperature of 40°C or higher. The washing time will
be prolonged. If you select 60°C - 50°C - 40°C, the
washing temperature will be reduced to 42°C.
MENU: Menu option is used for selecting various
basic settings without affecting the particular wash
programme. These basic settings will remain active until
they are deselected/modified.
Selecting MENU Options
: sound, rinse +, language,
contrast or brightness.
1. Select a programme in order to turn the appliance
on.
2. Press Options button repeatedly until the
symbol flashes.
3. Press ChangeNote: digital instructions are displayed if you wait
3 seconds after displaying each option in this menu.
4. Press Options repeatedly until the required option
choice is displayed.
5. Press Change to select the desired option.
6. Press Exit to return to the set programme.
Example: Cotton , 90°C, 1400 rpm, with Time saving
option.
1. Select the cycle and programme settings.
Cotton
Cycle end at
60°C 1400
Temp.Spin
Options
Change
08.30
10.55
Exit
2. Enter the Menu option and select one of the memory
positions. A «Store programme?» message will
appear in the display.
A
Setup
Temp.Spin
Options
A
Change
Exit
B
Memory 1
Store program?
Temp.Spin
Options
Change
Exit
B
3. To memorise the selected programme press the
Change button. «Stored» message will appear in the
display .
Program Stored
Change
Temp.Spin
Options
Exit
Memory
Programme settings that are frequently used can be
saved (e.g. cotton, 90°C, 1400 rpm, with time saving).
There are 3 memory spaces available for this purpose.
The saved programme can be selected in the same way
as any other wash programme by means of the selector
dial.
To change the memorised programme setting repeat the
procedure from the beginning.
Note: once there is information saved in the memory it
cannot be deleted. However, it can be
overwritten/changed.
9
SOUND
The sound setting permits you to modify the function.
You can choose between different levels: low, no sound
and normal.
Example:
1. Enter the Menu option and select the sound setting.
Sound
Normal
Temp.Spin
Options
Change
Exit
LANGUAGE
You can change the language setting if you would like
the indicators in the display to appear in a different
language.
Example:
1. Enter the Menu option and select the Language
setting.
Language
ENGLISH
Change
Temp.Spin
Options
Exit
2. Use the Change button to select the desired level.
Sound
Low or No Sound
Change
Temp.Spin
Options
Exit
RINSE +
The washing machine is set such that its water
consumption is extremely economical. For people with
allergies and in areas where the water is very soft, it can
however be helpful to use more water when rinsing.
When you select “Rinse +”, 2 additional rinses will be
carried out for cottons and 1 additional rinse for
synthetics, delicates and silk items. If “Rinse +” has
been selected, will appear in the option row.
2. Press the Change button to select the desired
Language.
Sprache
DEUTCH
Temp.Spin
Options
Change
A
Exit
Einstellungen
Temp.Spin
Options
Change
Exit
B
CLOCK
The clock setting permits you to modify/set up the
current time. It is important to keep it updated as the
current END Cycle Time depends on it.
Example:
1. Enter the Menu option and select the Clock setting.
2. With a short/single time pressure of the Change
button, the time varies minute by minute. With a
continued pressure of the Change button, the time
varies 10 minutes by 10 minutes.
Extra Rinse
No10.55
Temp.Spin
Options
Change
Extra Rinse
Yes10.55
Exit
Temp.Spin
Options
Change
Exit
A
Clock
Set Time
Temp.Spin
Options
Change
14.45
Clock
Set Time
Exit
Temp.Spin
Options
A
Change
B
14.46
Exit
B
10
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.