![](/html/22/2237/22375149964eccfa436f6bba95c46de1e85af1c4a2d4a5ed6ae027f18fd59707/bg1.png)
35668 - 0501
ZANUSSI
Built-in oven
model ZSF 30 W/K
OPERATING AND INSTALLATION MANUAL
2
![](/html/22/2237/22375149964eccfa436f6bba95c46de1e85af1c4a2d4a5ed6ae027f18fd59707/bg2.png)
Warnings and guidance
It is most important that this instruction book should be retained with the appliance for future reference.
Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order
that the new owner can get to know the functions of the appliance and the relevant warnings.
These warnings are provided in the interest of safety. You MUST read them carefully before installing or
using the appliance.
This oven is heavy and care must be taken when
moving it.
Ensure that all packaging, both inside and outside the
oven, has been removed before the oven is used.
The oven must be installed according to the
instructions supplied. Any electrical work must be
undertaken by a qualified electrician/competent
person.
It is dangerous to alter the specifications in any way.
After installation, please dispose of the packaging with
due regard to safety and the environment.
During Operation
Do not use this oven if it is in contact with water and
never operate it with wet hands.
Ensure that the anti-tip oven shelves are installed in the
correct way (see instructions).
This oven is designed to be operated by adults and
children under supervision. Young children must not
be allowed to tamper with the controls or play near or
with the oven.
CAUTION - accessible parts, especially around the
grill area, may become hot when the oven is in use.
Children should be kept away until it has cooled.
Take great care when heating fats and oils as they will
ignite if they become too hot.
This oven has been designed for cooking edible
foodstuffs only and must not be used for any other
purposes.
Never place plastic or any other material which may
melt in or on the oven.
Only clean this oven in accordance with the
instructions.
Take care to follow the recommendations given for
tending the food when grilling. Use the handles
provided in the recommended way.
Always grill with the oven door closed.
Always remove the grill pan handle when grilling.
Always use oven gloves to remove and replace food
in the oven. Similarly always use oven gloves to
remove and replace the grill pan handle, before and
after grilling.
Ensure that you support the grill pan when removing
it from the oven.
Never line any part of the oven with aluminium foil.
Do not allow heatproof cooking material, e.g. roasting
bags, to come into contact with oven elements.
Always stand back from the oven when opening the
oven door, to allow any build-up of steam or heat to
release.
Stand clear when opening the drop down oven door.
Do not allow it to fall open - support it using the door
handle, until it is fully open.
Do not place sealed cans or aerosols inside the oven.
They may explode if they are heated.
Do not hang towels or clothes from the oven or its
handle. They are a safety hazard.
After Use
Ensure that all control knobs are in the OFF position
when not in use.
For hygiene and safety reasons, this oven should be
kept clean at all times. A build-up fats or other
foodstuffs could result in a fire, especially in the grill
pan.
Always allow the cooling fan to cool the oven down
before switching off at the electrical supply prior to
carrying out any cleaning or maintenance work.
Do not leave utensils containing foodstuffs, e.g. fat or
oil in or on the oven in case it is inadvertently switched
ON.
Ovens and hobs become very hot, and retain their heat
for a long period of time after use. Children should be
kept well away from the cooker until it has cooled.
Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
inexperienced may cause injury or serious
malfunctioning. Refer to your local Zanussi Service
Centre. Always insist on genuine Zanussi spare parts.
3
![](/html/22/2237/22375149964eccfa436f6bba95c46de1e85af1c4a2d4a5ed6ae027f18fd59707/bg3.png)
Contents
Warnings and Guidance Page 3
Technical Data Page 5
Installation Page 6
Installation and Electrical Connection Page 6-7
When the oven is first installed Page 8
Use and Care Page 9
How to set the clock and timer Page 10
Controls Page 11
Using the fan oven Page 12-13
Oven cooking chart Page 14
Grilling Page 15
Helpful hints when buying and preparing food Page 16
Cleaning the oven Page 17
Cleaning the Hinged Grill Page 18
What Happens if something goes wrong Page 18
WARNING
Please remember that an appliance used for cooking does
get hot, so make sure that children are kept well away while it is in use.
4
![](/html/22/2237/22375149964eccfa436f6bba95c46de1e85af1c4a2d4a5ed6ae027f18fd59707/bg4.png)
Technical data
Model Number: ZSF 30W - ZSF 30K
Recess dimensions
Height 580 mm
Width 560-570 mm
Depth 550 mm
Oven Capacity 1.9 cu. ft.
Internal oven dimensions
Height 320 mm
Width 420 mm
Depth 390 mm
Oven Ratings
Oven Element 2.5 kW
Grill Element 1.8 kW
Convection Fan 30 W
Oven Light 15 W
Cooling fan 25 W
Total Rating 2.565 kW
Cable
Cable cross-section 2.5 mm
Type of cable Ho RR-F
Fuse (min.) 13 amp
2
5
![](/html/22/2237/22375149964eccfa436f6bba95c46de1e85af1c4a2d4a5ed6ae027f18fd59707/bg5.png)
Installation
It is mandatory that all operations required for the
installation be carried out by a qualified or
competent person - in accordance with existing
rules and regulations.
Please ensure that when the appliance is installed
it is easily accessible for the engineer in the event
of a breakdown.
BUILDING IN
It is important that the dimensions and materials
of the surround or cabinet into which the oven will
be built are correct and will withstand a
temperature increase of at least 60°C above
ambient; and that proper arrangements are made
of continuous supply of air to the oven so it does
not overheat.
Dimensions of the appliance and recess
required are given below (Fig. 1-2).
Fig. 2
Fig. 3
Securing The Oven To The Cabinet
Fit the appliance into the cabinet recess, open the
oven door and secure the oven to the kitchen
Fig. 1
cabinet with four wood screw, which fit the holes
provided in the oven frame (Fig. 3).
Installation and electrical connection
WARNING
We strongly recommend that all operations for the
installation of your cooker be carryed out by
QUALIFIED PERSONNEL in accordance with
existing rules and regulations.
Important
Before the appliance is connected, check that the
6
main fuse and the domestic installation can
support the load; and tha the power supply is
properly earthed.
The manufacturer disclaims any responsability
should these safety instructions not be carried
out.
![](/html/22/2237/22375149964eccfa436f6bba95c46de1e85af1c4a2d4a5ed6ae027f18fd59707/bg6.png)
Electrical connection
We strongly recommend that all operations for the
installation of your oven be carried out by
QUALIFIED PERSONNEL to the relevant
British Standards.
The oven designed to be connected to 240V
(50Hz) electricity supply.
The oven has an easily accessible terminal block
which is marked as follows:
Letter L - Live terminal
Letter N - Neutral terminal
- Earth terminal
THIS APPLIANCE MUST BE
EARTHED
The cable used to connect the oven to the
electrical supply should have the characteristics
indicated in the table.
It is necessary that you install a double pole
switch between the appliance and the electricity
supply (mains), with a minimum gap of 3 mm
between the switch contacts and of a type suitable
for the required load in compliance with the
current rules.
The switch must not break the yellow and green
earth cable at any point.
Important
After installation and connecting, the cable must
be placed so that it cannot at any point reach a
temperature of more than 50°C above the ambient
temperature.
Before the appliance is connected, check that the
main fuse and the domestic installation can
support the load; and that the power supply is
properly earthed.
The manufacturer disclaims any responsibility
should these safety measures not be carried out.
This appliance meets the requirements laid down
in EEC Directive No. 87/308 dated 2/6/87 relating
to the suppression of radio and TV interference.
Models Rating Cable cross Fuse
ZSF 30
2565 W 2,5
section mm2 and
Type of the cable min.
Ho5 RR-F 13 A
68-0501
7