Zanussi ZRB934FW2, ZRB934FX2 User Manual

EN
User manual
Fridge Freezer
ZRB934FW2 ZRB934FX2
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7
Safety information
In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is impor­tant to ensure that all people using the appliance are thor­oughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. For the safety of life and property keep the precautions of these user's instructions as the manufacturer is not re­sponsible for damages caused by omission.
Children and vulnerable people safety
• This appliance is not intended for use by persons (in­cluding children) with reduced physical, sensory or mental capabilities, or lack of experience and knowl­edge, unless they have been given supervision or in­struction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• Keep all packaging well away from children. There is risk of suffocation.
• If you are discarding the appliance pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent playing children to suffer electric shock or to close themselves into it.
• If this appliance featuring magnetic door seals is to re­place an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lock un­usable before you discard the old appliance. This will prevent it from becoming a death trap for a child.
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Environmental concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12
Subject to change without notice.
General safety
Warning!
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• The appliance is intended for keeping foodstuff and/or beverages in a normal household as explained in this instruction booklet.
• Do not use a mechanical device or any artificial means to speed up the thawing process.
• Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances, un­less they are approved for this purpose by the manu­facturer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, be certain that none of the components of the refriger­ant circuit become damaged. If the refrigerant circuit should become damaged:
– avoid open flames and sources of ignition – thoroughly ventilate the room in which the appli-
ance is situated
• It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock.
Warning! Any electrical component (power cord,
plug, compressor) must be replaced by a certified service agent or qualified service personnel to avoid haz­ard.
1. Power cord must not be lengthened.
2
www.zanussi.com
2. Make sure that the power plug is not squashed or damaged by the back of the appliance. A squash­ed or damaged power plug may overheat and cause a fire.
3. Make sure that you can come to the mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.
6. You must not operate the appliance without the lamp cover (if foreseen) of interior lighting.
• This appliance is heavy. Care should be taken when moving it.
• Do not remove nor touch items from the freezer com­partment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.
• Avoid prolonged exposure of the appliance to direct sunlight.
• Bulb lamps (if foreseen) used in this appliance are spe­cial purpose lamps selected for household appliances use only. They are not suitable for household room il­lumination.
Daily Use
• Do not put hot pot on the plastic parts in the appliance.
• Do not store flammable gas and liquid in the appliance, because they may explode.
• Do not place food products directly against the air out­let on the rear wall. (If the appliance is Frost Free)
• Frozen food must not be re-frozen once it has been thawed out.
• Store pre-packed frozen food in accordance with the frozen food manufacturer's instructions.
• Appliance's manufacturers storage recommendations should be strictly adhered to. Refer to relevant instruc­tions.
• Do not place carbonated or fizzy drinks in the freezer compartment as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance.
• Ice lollies can cause frost burns if consumed straight from the appliance.
Care and cleaning
• Before maintenance, switch off the appliance and dis­connect the mains plug from the mains socket.
www.zanussi.com
• Do not clean the appliance with metal objects.
• Do not use sharp objects to remove frost from the ap­pliance. Use a plastic scraper.
• Regularly examine the drain in the refrigerator for de­frosted water. If necessary, clean the drain. If the drain is blocked, water will collect in the bottom of the appli­ance.
Installation
Important! For electrical connection carefully follow the instructions given in specific paragraphs.
• Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing.
• It is advisable to wait at least four hours before con­necting the appliance to allow the oil to flow back in the compressor.
• Adequate air circulation should be around the appli­ance, lacking this leads to overheating. To achieve suf­ficient ventilation follow the instructions relevant to in­stallation.
• Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts (compressor, condenser) to prevent possible burn.
• The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the appliance.
• Connect to potable water supply only (If a water con­nection is foreseen).
Service
• Any electrical work required to do the servicing of the appliance should be carried out by a qualified electri­cian or competent person.
• This product must be serviced by an authorized Service Centre, and only genuine spare parts must be used.
3
Environment Protection
This appliance does not contain gasses which could
damage the ozone layer, in either its refrigerant cir­cuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The
Product description
insulation foam contains flammable gases: the appliance shall be disposed according to the applicable regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchang­er. The materials used on this appliance marked by the symbol
are recyclable.
Fruit drawers
1
Glass shelf
2
Glass shelf
3
Glass shelf
4
Bottle rack
5
Glass shelf
6
Control unit
7
Butter shelf
8
2 43 6 8 9 10
5 71
1112131415
Door shelf
9
Bottle shelf
10
Freezer basket
11
Maxibox basket
12
Frostfree basket
13
Cold module
14
Rating plate
15
4
www.zanussi.com
Control panel
1 2
5 4 3
Temperature indicator LED
1
Fast Freeze indicator
2
Door sensor
3
Fast Freeze button
4
Temperature regulator
5
Switching on
Insert the plug into the wall socket.
Temperature regulation
To operate the appliance, proceed as follows:
• touch the temperature regulator button until the LED corresponding to the required temperature lights up. Selection is progressive, varying from 2 to 8°C. At first button touch actual setting LED keeps blinking. Any time the button is touch the set temperature is moved to 1 position . Corresponding LED will blink for a while. Touch the setting button until the required temperature is selected. The set will be fixed
coldest setting: +2°C warmest setting: +8°C
A medium setting is generally the most suitable.
However, the exact setting should be chosen keeping in mind that the temperature inside the appliance depends on:
• room temperature
• how often the door is opened
• quantity of food stored
• appliance location.
Fast Freezing function
You can activate the Fast Freezing function by pressing the Fast Freezing button. The LED corresponding to the symbol Fast Freezing indi­cator lights up. You can deactivate the Fast Freezing function by pressing the Fast Freezing button again. The Fast Freezing indicator will light off.
Important!
This function stops automatically after 52 hours.
Door sensor
The appliance is equipped with an optical sensor to detect door open. Do not put anything in front of the corresponding window, to maintain proper functioning.
First use
Cleaning the interior
Before using the appliance for the first time, wash the inte­rior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.
www.zanussi.com
Important! Do not use detergents or abrasive powders, as these will damage the finish.
5
Loading...
+ 11 hidden pages