Zanussi ZRB934EW User Manual

EN

User manual

Fridge Freezer

ZRB934EW

Contents

Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 4
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ 7

Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8
Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Environmental concerns _ _ _ _ _ _ _ _ _ _ 13

Subject to change without notice.

Safety information

In the interest of your safety and to ensure the
correct use, before installing and first using the
appliance, read this user manual carefully, in­cluding its hints and warnings. To avoid unnec­essary mistakes and accidents, it is important
to ensure that all people using the appliance
are thoroughly familiar with its operation and
safety features. Save these instructions and
make sure that they remain with the appliance if
it is moved or sold, so that everyone using it
through its life will be properly informed on ap­pliance use and safety.
For the safety of life and property keep the pre­cautions of these user's instructions as the
manufacturer is not responsible for damages
caused by omission.

Children and vulnerable people safety

• This appliance is not intended for use by per­sons (including children) with reduced physi­cal, sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction con­cerning use of the appliance by a person re­sponsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.

• Keep all packaging well away from children.
There is risk of suffocation.

• If you are discarding the appliance pull the
plug out of the socket, cut the connection
cable (as close to the appliance as you can)
and remove the door to prevent playing chil­dren to suffer electric shock or to close
themselves into it.

• If this appliance featuring magnetic door
seals is to replace an older appliance having

a spring lock (latch) on the door or lid, be
sure to make that spring lock unusable be­fore you discard the old appliance. This will
prevent it from becoming a death trap for a
child.

General safety

Warning!

Keep ventilation openings, in the appliance en­closure or in the built-in structure, clear of ob­struction.

• The appliance is intended for keeping food­stuff and/or beverages in a normal household
as explained in this instruction booklet.

• Do not use a mechanical device or any artifi­cial means to speed up the thawing process.

• Do not use other electrical appliances (such
as ice cream makers) inside of refrigerating
appliances, unless they are approved for this
purpose by the manufacturer.

• Do not damage the refrigerant circuit.

• The refrigerant isobutane (R600a) is con­tained within the refrigerant circuit of the ap­pliance, a natural gas with a high level of en­vironmental compatibility, which is neverthe­less flammable.
During transportation and installation of the
appliance, be certain that none of the com­ponents of the refrigerant circuit become
damaged.
If the refrigerant circuit should become dam­aged:

– avoid open flames and sources of ignition
– thoroughly ventilate the room in which the

appliance is situated

2

www.zanussi.com

• It is dangerous to alter the specifications or
modify this product in any way. Any damage
to the cord may cause a short-circuit, fire
and/or electric shock.

Warning! Any electrical component (pow-

er cord, plug, compressor) must be re­placed by a certified service agent or qualified
service personnel to avoid hazard.

1. Power cord must not be lengthened.

2. Make sure that the power plug is not
squashed or damaged by the back of
the appliance. A squashed or damaged
power plug may overheat and cause a
fire.

3. Make sure that you can come to the
mains plug of the appliance.

4. Do not pull the mains cable.

5. If the power plug socket is loose, do not
insert the power plug. There is a risk of
electric shock or fire.

6. You must not operate the appliance
without the lamp cover (if foreseen) of
interior lighting.

• This appliance is heavy. Care should be tak­en when moving it.

• Do not remove nor touch items from the
freezer compartment if your hands are damp/
wet, as this could cause skin abrasions or
frost/freezer burns.

• Avoid prolonged exposure of the appliance
to direct sunlight.

• Bulb lamps (if foreseen) used in this appli­ance are special purpose lamps selected for
household appliances use only. They are not
suitable for household room illumination.

Daily Use

• Do not put hot pot on the plastic parts in the
appliance.

• Do not store flammable gas and liquid in the
appliance, because they may explode.

• Do not place food products directly against
the air outlet on the rear wall. (If the appli­ance is Frost Free)

• Frozen food must not be re-frozen once it
has been thawed out.

• Store pre-packed frozen food in accordance
with the frozen food manufacturer's instruc­tions.

• Appliance's manufacturers storage recom­mendations should be strictly adhered to.
Refer to relevant instructions.

• Do not place carbonated or fizzy drinks in the
freezer compartment as it creates pressure
on the container, which may cause it to ex­plode, resulting in damage to the appliance.

• Ice lollies can cause frost burns if consumed
straight from the appliance.

Care and cleaning

• Before maintenance, switch off the appliance
and disconnect the mains plug from the
mains socket.

• Do not clean the appliance with metal ob­jects.

• Do not use sharp objects to remove frost
from the appliance. Use a plastic scraper.

• Regularly examine the drain in the refrigerator
for defrosted water. If necessary, clean the
drain. If the drain is blocked, water will col­lect in the bottom of the appliance.

Installation

Important! For electrical connection carefully

follow the instructions given in specific
paragraphs.

• Unpack the appliance and check if there are
damages on it. Do not connect the appliance
if it is damaged. Report possible damages
immediately to the place you bought it. In that
case retain packing.

• It is advisable to wait at least four hours be­fore connecting the appliance to allow the oil
to flow back in the compressor.

• Adequate air circulation should be around
the appliance, lacking this leads to overheat­ing. To achieve sufficient ventilation follow
the instructions relevant to installation.

• Wherever possible the back of the product
should be against a wall to avoid touching or
catching warm parts (compressor, condens­er) to prevent possible burn.

3

www.zanussi.com

• The appliance must not be located close to
radiators or cookers.

• Make sure that the mains plug is accessible
after the installation of the appliance.

• Connect to potable water supply only (If a
water connection is foreseen).

Service

• Any electrical work required to do the servic­ing of the appliance should be carried out by
a qualified electrician or competent person.

• This product must be serviced by an author­ized Service Centre, and only genuine spare
parts must be used.

Environment Protection

This appliance does not contain gasses

which could damage the ozone layer, in ei­ther its refrigerant circuit or insulation materials.
The appliance shall not be discarded together
with the urban refuse and rubbish. The insula­tion foam contains flammable gases: the appli­ance shall be disposed according to the appli­cable regulations to obtain from your local au­thorities. Avoid damaging the cooling unit, es­pecially at the rear near the heat exchanger.
The materials used on this appliance marked by

the symbol

are recyclable.

Product description

2 43 6 8 9 10

1112131415

5 71

1

Fruit drawers

2

Glass shelf

3

Glass shelf

4

Glass shelf

5

Bottle rack

6

Glass shelf

7

Control unit

8

Butter shelf

4

www.zanussi.com

9

Door shelf

10

Bottle shelf

11

Freezer basket

12

Maxibox basket

13

Frostfree basket

14

Cold module

15

Rating plate

Control panel

1 2

5 4 3

1

Temperature indicator LED

2

Fast Freeze indicator

3

Door sensor

4

Fast Freeze button

5

Temperature regulator

Switching on

Insert the plug into the wall socket.

Temperature regulation

To operate the appliance, proceed as follows:

• touch the temperature regulator button until
the LED corresponding to the required tem­perature lights up. Selection is progressive,
varying from 2 to 8°C.
At first button touch actual setting LED
keeps blinking.
Any time the button is touch the set tempera­ture is moved to 1 position . Corresponding
LED will blink for a while.
Touch the setting button until the required
temperature is selected. The set will be fixed

coldest setting: +2°C
warmest setting: +8°C

A medium setting is generally the most suitable.

However, the exact setting should be chosen
keeping in mind that the temperature inside the
appliance depends on:

• room temperature

• how often the door is opened

• quantity of food stored

• appliance location.

Fast Freezing function

You can activate the Fast Freezing function by
pressing the Fast Freezing button.
The LED corresponding to the symbol Fast
Freezing indicator lights up.
You can deactivate the Fast Freezing function
by pressing the Fast Freezing button again.
The Fast Freezing indicator will light off.

Important!

This function stops automatically after 52
hours.

Door sensor

The appliance is equipped with an optical sen­sor to detect door open.
Do not put anything in front of the correspond­ing window, to maintain proper functioning.

First use

Cleaning the interior

Before using the appliance for the first time,
wash the interior and all internal accessories

with lukewarm water and some neutral soap so
as to remove the typical smell of a brand-new
product, then dry thoroughly.

5

www.zanussi.com