Zanussi ZQF11431DA, ZQF11432DA User Manual

EN
ZQF11431DA ZQF11432DA
User Manual
Freezer
Contents
Safety information 2 Safety instructions 3 Operation 4 First use 6 Daily use 6
Hints and tips 6 Care and cleaning 7 Troubleshooting 8 Installation 10 Technical information 12
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
Children and vulnerable people safety
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Do not let children play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
Keep all packaging away from children.
General Safety
This appliance is intended to be used in household and similar
applications such as:
Farm houses; staff kitchen areas in shops, offices and other
working environments
By clients in hotels, motels, bed and breakfast and other
residential type environments
Keep ventilation openings, in the appliance enclosure or in the
built-in structure, clear of obstruction.
2 www.zanussi.com
Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended by the manufacturer.
Do not use water spray and steam to clean the appliance.
Clean the appliance with a moist soft cloth. Only use neutral
detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
Do not store explosive substances such as aerosol cans with a
flammable propellant in this appliance.
If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
Safety instructions
Installation
WARNING!
Only a qualified person must install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Obey the installation instruction supplied with the appliance.
Always be careful when you move the appliance because it is heavy. Always wear safety gloves.
Make sure the air can circulate around the appliance.
Wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
Do not install the appliance close to radiators or cookers, oven or hobs.
The rear of the appliance must stand against the wall.
Do not install the appliance where there is direct sunlight.
Do not install this appliance in areas that are too humid or too colds, such as the construction appendices, garages or wine cellars.
When you move the appliance, lift it by the front edge to avoid scratching the floor.
Electrical connection
WARNING!
Risk of fire and electrical shock.
The appliance must be earthed.
Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician.
Always use a correctly installed shockproof socket.
Do not use multi-plug adapters and extension cables.
Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service Centre or an electrician to change the electrical components.
The mains cable must stay below the level of the mains plug.
Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
www.zanussi.com 3
Use
WARNING!
Risk of injury, burns, electrical shock or fire.
Do not change the specification of this appliance.
Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer.
Be careful not to cause damage to the refrigerant circuit. It contains isobutane (R600a), a natural gas with a high level of environmental compatibility. This gas is flammable.
If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
Do not let hot items to touch the plastic parts of the appliance.
Do not put soft drinks in the freezer compartment. This will create pressure on the drink container.
Do not store flammable gas and liquid in the appliance.
Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
Do not touch the compressor or the condenser. They are hot.
Do not remove or touch items from the freezer compartment if your hands are wet or damp.
Do not freeze again food that has been thawed.
Obey the storage instructions on the packaging of frozen food.
Care and cleaning
WARNING!
Risk of injury or damage to the appliance.
Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.
Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.
Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the mains supply.
Cut off the mains cable and discard it.
Remove the door to prevent children and pets to be closed inside of the appliance.
The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.
The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
Do not cause damage to the part of the cooling unit that is near the heat exchanger.
Operation
Control panel
1 2 3 4 5
1
Power indicator light
2
Temperature regulator
4 www.zanussi.com
3
QuickFreeze light
4
QuickFreeze switch and alarm reset switch
5
Alarm light
Switching on
Connect the appliance to the main power supply.
1. Turn the Temperature regulator clockwise to a medium setting.
The power indicator light will turn on and a sound will signal for 2 seconds.
If the temperature inside the appliance is too high, the Alarm light will blink and the sound signal alarm will turn on.
2. Push the QuickFreeze switch and the sound signal alarm will get off.
3. Push the QuickFreeze switch once again and the QuickFreeze indicator will light up. The appliance will start to operate.
Switching off
Turn the Temperature regulator to the "O" position. After a 2 second sound, the power indicator light will turn off.
Temperature regulation
The temperature is regulated automatically.
A medium setting is generally the most suitable. However, the exact setting should be chosen keeping in mind that the temperature inside the appliance depends on:
room temperature,
how often the door is opened,
the quantity of food stored,
the location of the appliance.
1. Turn the Temperature regulator toward lower settings to obtain the minimum coldness.
2. Turn the Temperature regulator toward higher settings to obtain the maximum coldness.
CAUTION!
If the ambient temperature is high or the appliance is fully loaded, and the appliance is set to the lowest temperatures, it may run continuously causing frost to form on the rear wall. In this case the dial must be set to a higher temperature to allow automatic defrosting and therefore reduced energy consumption.
QuickFreeze function
Press the QuickFreeze button. The QuickFreeze indicator appears. To switch off the function before its automatic end, press the QuickFreeze button until the QuickFreeze indicator turns off
Door open alarm
An acoustic alarm will sound if the door is left open for a few minutes. The door open alarm conditions are indicated by:
a flashing Alarm indicator;
an acoustic buzzer. When normal conditions are restored (door closed), the alarm will stop. The buzzer can also be switched off by pressing any button.
High temperature alarm
If the temperature inside the freezer has risen to a point where the safe storage of frozen food is no longer ensured (for example due to an power failure), the Alarm light will blink and an acoustic alarm will sound.
When the freezer is first switched on, the Alarm light blinks until the temperature has dropped to a safe level for the storage of frozen food.
1. Switch off the warning tone by pressing the QuickFreeze switch.
The QuickFreeze indicator appears. The Alarm light blinks until the required temperature has been reached again.
2. Release theQuickFreeze switch as soon as the Alarm light is off.
The QuickFreeze indicator turns off.
www.zanussi.com 5
Loading...
+ 11 hidden pages