Zanussi ZOU655 USER MANUAL

Einbau-Herd
Built-under oven

ZOU 655

Bedienungs- und Einbauanweisungen
Instruction booklet

English

Warnings - Built-under oven

It is most important that the instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move
house and leave the appliance, always ensure that the book is supplied with the appliance in
order that the new owner can be acquainted with the functioning of the appliance and the
relevant warnings. These warnings are provided in the interest of safety. You must read
them carefully before installing or using the appliance.

Installation

z Any installation work must be undertaken

by a qualified electrician or competent
person.

z Installation and initial adjustment of your

oven MUST be carried out by qualified
personnel in compliance with current
regulations. Specific installation
instructions for the installer are given in this
booklet.

During use

z This appliance has been designed for

cooking edible foodstuffs only, and must
not be used for any other purposes.

z It is dangerous to alter the specifications

or modify the product in any way.

z Always stand back from the oven when

opening the oven door during cooking or
at the end of it to allow any build up of
steam or heat to release.

z Appliances become very hot with use, and

retain their heat for a long period after use.
Care should be taken to avoid touching
heating elements inside the oven.

z Always ensure that the control knobs are

in the “off” position when not in use.

z For hygiene and safety reasons, this

appliance should be kept clean at all times.
A build-up of fats or foodstuffs could result
in a fire.

z Never line any part of the oven with

aluminium foil.

z Easy clean-liners (if provided) should never

be cleaned with any other than soapy water.

z Never use steam or steam machines to

clean the appliance.

z Before any maintenance or cleaning work

is carried out on the appliance, always turn
off the isolator switch at the cooker point,
and allow to cool.

z Ensure that the shelves are put in place in

the correct way.

z This oven (even if it is linked to an electrical

cooking table) is made to function at 230 V
mono, double or three-phase with neutral.

z A polyphase linking without neutral (400 V)

can induce the distruction of the oven and
of the eventual cooking table.

Child safety

z This appliance is designed to be operated

by adults. Children should not be allowed
to tamper with the controls or play with the
product.

z Children should be supervised at all times

and should not be allowed to touch the hot
surfaces or be in the vicinity when in use
or until the appliance has cooled after use.

z During oven cooking and grilling, the

appliance door and the surrounding parts
are warmed up to a very high temperature.
Be careful and keep children away from
the appliance while you are using it. When
you connect other appliances to a plug near
the oven, check carefully that the wire does
not touch warm parts of the oven and does
not get taken in the oven door.

MANUFACTURER:

ELECTROLUX HOME PRODUCTS ITALY S.p.A.
Viale Bologna, 298
47100 FORLÌ (Italy)

20

Technical assistance

z This appliance should be serviced by an

authorized Network Service Centre, and
only genuine spare parts should be used.

z Under no circumstances should you

attempt to repair the appliance yourself.
Repairs carried out by inexperienced
persons may cause injury or serious
malfunctioning. Refer to your local Service
Centre. Always insist on genuine spare
parts.

Guide to Use the
instructions

Safety Instructions

Step by step instructions for an

)

operation

Hints and Tips

This appliance complies with the
following E.E.C. Directives:

- 73/23 - 90/683 (Low Voltage Directive);

- 89/336 (Electromagnetical Compatibility

Directive);

- 93/68 (General Directives)
and subsequent modifications.

When the oven is first installed

The oven will work only if the time
of day has been set (please read
the relevant instructions).

Once the oven has been installed:

)

a) set the thermostat knob to “MAX”;
b) switch the oven function control knob to

conventional cooking ( );

c) allow the oven to run empty for

approximately 45 minutes;
d) open a window for ventilation.
During this time, an unpleasant odour may
be emitted. This is absolutely normal, and
is caused by residues of manufacturing.
Repeat this operation for the grill and fan
cooking function.
Once this operation is carried out, let the
oven cool down, then clean the oven cavity
with a soft cloth soaked in warm soapy
water.

To open the oven door, always
catch the handle in its central
part.

Before cooking for the first time,
carefully wash the oven
accessories.

21

Description of the appliance

8

92345

10

7

1

6

11

12

13

1. Control Panel

2. Front right hotplate/cooking zone control

knob

3. Rear right hotplate/cooking zone control
knob

4. Rear left hotplate/cooking zone control
knob

5. Front left hotplate/cooking zone control
knob

22

6. End of cooking programmer

7. Operating control light

8. Cooking function control knob

9. Thermostat control light

10. Thermostat control knob

11. Grill

12. Oven lamp

13. Rating plate

Electric oven

Oven Function (Fig. 1) and
Thermostat (Fig. 2) control
knobs

They enable to select the most
appropriate type of heating for the different
cooking requirements by appropriately
connecting the heating elements and
adjusting temperature to the required
level.

0 OFF position

Conventional cooking - The heat
comes from both the top and bottom

element, ensuring even heating
inside the oven.

0

Fig. 1

Bottom heating element - The heat
comes from the bottom of the oven

only.
Fan cooking - This allows you to

roast or roast and bake
simoultaneously using any shelf,
without flavour transference.

Inner grill element only - can be used
for grilling small quantities.

Double Grill - The full grill element
will be on.

Defrost Setting - This setting is

intended to assist in thawing of
frozen food.

End of cooking
programmer

This device (Fig. 3) allows you to make
the oven switch off automatically once the
preset time is over. An acousitic signal
will be heard when the cooking is
completed.The cooking duration can be
set up to 90 minutes maximum. Place
food in the oven and turn the oven function

Fig. 2

Fig. 3

100

15

50

0

5

MAX

200

150

90

75

60

30

45

23

control knob and the thermostat control knob
on the required settings. Turn the timer knob
to maximum time position ("90"), then turn
it back to set the required cooking time.
When the cooking time is over, an acoustic
alarm will sound and the oven will switch off

automatically. Turn the timer knob on to
set the oven on manual operation.

Hotplate control knobs

The Control Knobs for the hotplates (Fig. 4) can
be found on the oven control panel. The energy
regulator of the hotplates can be set by means
of a 7-position control knob:

0 = Off
1 = Minimum
3 = Maximum

The intermediate positions give an increasing
heating power.

Carefully supervise cookings with oil
or fats, since these types of food can
result in a fire, when over-heated.

Oven thermostat control light

This light goes off when the oven heats up to
the temperature set and comes on again every
time the thermostat cuts in to stabilize
temperature.

0

3

1

2

Fig. 4

Operating control light

It indicates that one or more of the heating
elements are turned on.

Safety thermostat

In order to avoid excessive overheating due to
incorrect use of the appliance or else to a faulty
component, the oven is equipped with a safety
thermostat which cuts off the power supply if
necessary. Operation is restored automatically
when the oven temperature decreases to normal
values. Therefore, if the thermostat cuts in
because you have not been using the appliance
correctly, the oven can be used again simply
by waiting for the appliance to cool down. If,
instead, the thermostat cuts in because of a
faulty component, you should call the Service
Department.

24