Zanussi ZJD1219 User Manual

WASHER-DRYER

DRAIN

ZJD

. 1219

1200

900

700

500

START PAUSE

WASH

DRY

DRYING TIME

DOOR

PREWASH

SPIN

END

EXTRA RINSE

WASH TIME

DELAY START

RINSES

95º

60º

40º

30º

60º

40º

30º

40º

30º

40º

30º

COTTON

DELICATES

SYNTHETICS

WOOL

60º

SPECIAL PROGRAMMES

40º

SOIL LEVEL

INTENSIVE

NORMAL

QUICK

SPIN

ON / OFF

SPIN

SPEED

PREWASH

RINSE HOLD

ZJD 1219

132997370

INSTRUCTION BOOKLET

Important Safety Information

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.

These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.

●

Installation

●

This appliance is heavy. Care should be taken when moving it.

●

It is dangerous to alter the specifications or attempt to modify this product in any way.

●

All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions.

●

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

●

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

●

Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

●

If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.

Child Safety

●

This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.

●

Pets and children have been known to climb into washing machines. Please check your drum before use.

●

The glass door becomes very hot during the washing and drying cycle. Keep children away from the vicinity of the appliance whilst it is in operation.

Keep all packaging well away from children.

●

Keep all detergents in a safe place out of children’s

●

reach.

Use

●

Always unplug the appliance and turn off the water supply after use.

●

Do not overload the appliance. See relevant section in the instruction book.

●

Only wash fabrics which are designed to be machine washed. If in doubt, consult the care label on the clothes.

Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.

●

Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.

●

Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.

●

Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.

●

Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.

●

As some duvets and eiderdowns should be washed in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine.

●

Never tumble dry items that have had contact with chemicals such as dry cleaning fluid.These are of a volatile nature and could cause an explosion.

Only tumble dry items which have been washed in water or require airing.

●

Plastic detergent dispensers should not remain in the drum during the drying cycle, as the plastic used is not designed to withstand the heat. If you wish to wash-through-to-dry you should use the conventional detergent dispenser drawer.

●

Leave the porthole door slightly ajar between washes to preserve the door seal.

●

Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Zanussi Service Force Centre. Always insist on genuine Zanussi spare parts.

Contents

For the User

Important Safety Information Your New Washer Dryer Description of the Appliance

Detergent dispenser drawer 5

The Control Panel Operating sequence

Washing only 11

Load the laundry 11 Measure out the detergent 11 Jetsystem wash 11 Measure out the fabric softener 11 Switch the machine on 11 Select the required programme 11 Select the SPIN SPEED or NO SPIN option 12 Select the required options 12 Select the delay start 12 Start the programme 12 At the end of the programme 12

Drying only 13

Automatic washing and drying 13

6-10

11-12

For the Installer

Installation Instructions

Technical Specifications

Unpacking 28 Positioning 28 Water inlet 29 Water drainage 29 Levelling 30 Special conditions 30 In the interest of the environment 30 Electrical connection 31 Building-in 32-33

Washing and Drying Hints

Which detergent?.... 15

And in which form? 15

Wash Care Symbols Washing and Special Programmes Drying Programmes Maintenance and Cleaning

Descaling 20 After each wash 20 Maintenance wash 20 External cleaning 20 Cleaning the dispenser drawer 20 Cleaning the drawer recess 20 Cleaning the filter 20 The dangers of freezing 21

Something Not Working Service and Spare Parts Guarantee conditions Service Force Centres

14-15

17-18

20-21

22-23

25-26

Guide to use the Instruction Book

The following symbols will be found in the text to guide you throughout the instructions:

Safety instructions Hints and tips Environmental information

Your New Washer-Dryer

Your new washer-dryer fitted with the Zanussi “JET SYSTEM”, meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.

Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type of fabric.

●

Automatic cooling of the wash water to 60°C

before draining, with the 95°C programme. This reduces thermal shock to fabrics, helping to prevent creasing.

●

The special wool programme with its new delicate wash system treats your woollens with extreme care.

●

The anti-unbalance device ensures that the washing machine remains stable when spinning.

●

The two drying programmes will give your wash that soft, relaxed feel whatever the weather.

Ecological hints

To save water and energy and help protect the environment, we recommend that you follow these hints:

●

Adjust the quantity of detergent according to the hardness of your water supply, the amount of laundry and the degree of soiling.

●

Select an “economy” programme for lightly soiled laundry.

●

A programme without prewash is sufficient for normally soiled laundry.

●

The machine works more economically if it is fully loaded both for washing and drying cycles.

●

With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.

●

Always load well spun laundry. The higher the spin speed, the lower the electricity consumption and the shorter the drying times.

In the interest of the environment

●

Materials marked with the symbol are recyclable.

●

Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.

●

When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside.

●

Help to keep your country tidy - use authorised disposal sites for your old appliance.

How do we help to protect the environment? We use recycled paper!

Important

Your machine is fitted with a balance control device, which ensures the machine is stable during the spin. If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the wash load manually and select a spin programme. For more detailed information see the section headed "Something Not Working".

Description of the Appliance

DRAIN

ZJD

. 1219

1200

900

700

500

START PAUSE

WASH

DRY

DRYING TIME

DOOR

PREWASH

SPIN

END

EXTRA RINSE

WASH TIME

DELAY START

RINSES

95º

60º

40º

30º

60º

40º

30º

40º

30º

40º

30º

COTTON

DELICATES

SYNTHETICS

WOOL

60º

SPECIAL PROGRAMMES

40º

SOIL LEVEL

INTENSIVE

NORMAL

QUICK

SPIN

ON / OFF

SPIN

SPEED

PREWASH

RINSE HOLD

Programme chart

P0239S

1 Detergent dispenser drawer

2 Programme guide

3 Control panel

4 Door opening handle

5 Filter

6 Adjustable feet

Detergent dispenser drawer

Prewash

Main wash

Fabric softener

The Control Panel

1 2 3 4 5 6 7 8 9

13 14

ZJD

1219

1200

900

700

500

START PAUSE

WASH

DRY

DRYING

TIME

DOOR

PREWASH

SPIN

END

EXTRA RINSE

WASH TIME

DELAY START

RINSES

95º

60º

40º

30º

60º

40º

30º

40º

30º

40º

30º

COTTON

DELICATES

SYNTHETICS

WOOL

60º

SPECIAL PROGRAMMES

40º

SOIL

LEVEL

INTENSIVE

NORMAL

QUICK

SPIN

DRAIN

ON / OFF

SPIN

SPEED

PREWASH

RINSE HOLD

1 Detergent dispenser drawer

2 Mains-on light

This light comes on when the ON/OFF button is pressed, and goes out when it is pressed again.

3 ON/OFF button

Press this button to switch the machine on. Press it again to switch the machine off.

Programme Option buttons

Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the START/PAUSE button. When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out. If an incorrect option is selected, the corresponding pilot light flashes for about 2 seconds and the message Err is displayed.

4 Prewash button

The machine performs a prewash cycle at 30°C max. The prewash cycle ends with a short spin at 650 r.p.m. in programmes for Cotton and Synthetics, and with emptying of the water for Delicates. This option is not available with the wool programme. For use when washing heavily soiled laundry.

5 Spin Speed button

Press this button to reduce the maximum speed of the final speed proposed by the machine for the selected programme or to select position NO SPIN. The light corresponding to the selected option illuminates.

Spin speed

The following speeds are available for the different fabrics:

• Cotton, linen: 500/700/900 max 1200 r.p.m.

• Synthetics, wool: 500/700 max 900 r.p.m.

• Delicates: 500 max 700 r.p.m.

No Spin

By selecting this option, the spinning phases are suppressed. This function is not available for cotton and linen. To be selected for extremely delicate items.

6 Rinse Hold button

When RINSE HOLD option is selected, the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished, the pilot light of the START/PAUSE button flashes to indicate that the water must be emptied out.

To empty out water there are 3 possibilities:

• Select programme (draining): The water is emptied out without spinning.

Attention! Before selecting programme the selector dial has to be positioned on O (cancelling).

• Depress START/PAUSE button: after emptying, the machine performs the spin cycle corresponding to the type of fabric previously selected.

• Select the spin speed by means of the relevant button and then depress the START/PAUSE button.

The machine empties itself after 18 hours if no action is taken. The RINSE HOLD option CANNOT be selected for the automatic Washing & Drying programme.

7 Extra Rinse button

---

Can be used with all programmes except the wool programme. The machine performs 4 rinses instead

of 3. This option is recommended for people who are allergic to detergents and in areas where the water is very soft.

8 Soil level

By depressing this button it is possible to select a programme more or less intensive according to the soil level of your laundry. The corresponding pilot light comes on.

Intensive

For heavy soiled laundry. The washing phase will be prolonged by about 10 minutes. It can be selected for cotton and synthetic items. This option cannot be selected with the Economy programmes .

Normal

For normally soiled laundry. The machine is pre-set for this function.

Quick

For lightly soiled laundry. By selecting this option the washing time is reduced by the following number of minutes: 53 minutes for cotton at 95° C 63 minutes for cotton at 60° C 24 minutes for synthetics 8 minutes for delicates This option can be selected for cotton, synthetic and delicates but not together with the Economy programmes .

10 Delay Start button

The wash programme can be delayed from 1 hour up to a maximum of 24 hours.

The button must be pressed after selecting the programme and before pressing the START/PAUSE button. The figures indicating the delay appear for about 3 seconds in the display. The duration of the selected wash programme is then displayed. One minute after depressing the START/PAUSE button, the machine starts its hourly countdown. To alter or cancel the preset delay, press the START/PAUSE button, then press the DELAY START button until the required time is displayed or, if you wish to cancel the delay, until the symbol Then press the START/PAUSE button again.

When the delay is cancelled, the display shows the duration of the wash programme previously selected.

is displayed.

11 Display

The display shows the following information:

Cancelling - Duration of the programme - Drying time - Delayed start - Incorrect option selection Alarm code - End of programme

Cancelling

If a programme has been cancelled - programme selector dial on position O - three flashing dashes appear on the display.

9 Drying Time button

By depressing this button you can select the desired drying time according to the fabrics (cotton or synthetics) you have to dry.

To select the drying time you have to push the button until the drying time you want appears in the display.

For COTTON you can select a drying time from 10 to 130 minutes.

For SYNTHETICS you can select a time from 10 to 100 minutes.

For automatic Washing & Drying programmes the drying time is displayed for 2 seconds, then the duration of the programme will appear.

Now you can select a new programme.

Duration of the selected programme

After selecting a programme, the duration is displayed in hours and minutes (for example 2.05).

The duration is calculated automatically on the basis of

DELAY START

105

2.05

E20

the maximum recommended load for each type of fabric.

After the programme has started, the time remaining is updated every minute.

Drying time

The selected drying time is displayed in minutes.

After starting the programme, the remaining time is updated every minute.

Delayed start

Alarm codes

In the event of operating problems, some alarm codes can be displayed, for example “Something not working”).

End of programme

When the programme has finished a flashing zero is displayed. The door can be opened.

E20 (see paragraph

The selected delay (24 hours max) set by means of the relevant button appears on the display for 3 seconds, then the duration of the previously selected programme is displayed.

The countdown is updated every hour.

Incorrect option selection

If an option which is not compatible with the set wash programme is selected, the message Err is displayed for 2 seconds.

If you have selected the Rinse Hold option, the zero will not flash.

12 START/PAUSE button

This button has three functions: Start - Pause - Draining of water / Spin.

Start

After having selected the required programme, press this button to start the machine; the corresponding pilot light stops flashing.

If you have selected the delayed start, the machine

WASH

DRY

DOOR

PREWASH

SPIN

END

RINSES

DRAIN

95º

60º

40º

30º

60º

40º

30º

40º

30º

40º

30º

COTTON

DELICATES

SYNTHETICS

WOOL

60º

SPECIAL PROGRAMMES

40º

begins its countdown. The duration of the programme or the delay appears on the display.

Pause

To interrupt a programme which is running, depress the Start/Pause button: the corresponding pilot light starts to flash.

To restart the programme from the point at which it was interrupted, press the START/PAUSE button again.

Draining of water/spin

By depressing the Start/Pause button

• The water of programme (Soak) is emptied out

• The water of the last rinse on programmes with RINSE HOLD option is emptied out and the laundry is spun.

13 Programme progress display

By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.

After the machine has started, only the running phase pilot light stays on. When the programme has finished, the END pilot light comes on.

14 Programme selector dial

The selector is divided into 5 sections:

• Cotton

• Synthetics

• Delicates

• Wool (hand washing)

• Special programmes

• Reset programme O

The selector dial can be turned either clockwise or anticlockwise. Position E corresponds to the ENERGY SAVING programme and position to “cold wash”. Position corresponds to the drying programme.

At the end of the programme the selector dial must be turned to position O (reset).

Functions

The DOOR light indicates if the door can be opened:

• Light on: the machine is functioning, but the door can be opened (see page 10).

• Light off: the door can be opened (at the end of the cycle) or cannot be opened because the machine is functioning.

• Light blinking: the machine is in PAUSE and the door cannot be opened.

End of programme

When the door locked light has gone out, the door can be opened. The END light on the programme progress display illuminates. Turn the programme selector dial to O. Switch the machine off and remove the laundry.

Altering a programme

You can alter the programme before it starts. When the programme has started, you can only reset it by turning the programme selector dial to O and then you can select the new programme. Start it by depressing the START/PAUSE button.

Interrupting a programme

Depress the START/PAUSE button to interrupt a programme which is running: the corresponding light starts to flash. Depress the same button to restart the programme.

Cancelling a programme

Turn the selector dial to O to cancel a programme which is running. Now you can select a new programme.

Opening the door after the programme has started

You can open the door, after having set the washer-dryer to PAUSE, provided the following conditions exist:

• the drum temperature is over 40°C;

• the level of the water is not high;

• the drum is not turning.

If these requirements are met, when you pause the machine, the DOOR light goes out and the door can be opened.

Should it not be possible to open the door, and should it be absolutely necessary to do so, switch the machine off by pressing the ON/OFF button.

After approximately 3 minutes, you can open the door.

Pay attention to the level and temperature of the water in the machine!

When you close the door and press the ON/OFF button again, the machine will resume the programme from the point where it had been interrupted.

Programme information

= Rinses

With this programme it is possible to rinse and spin garments which have been washed by hand. The machine performs 3 rinses, followed by a final spin at 1200 r.p.m. The spin speed can be reduced by depressing SPIN SPEED button.

= Softeners

Hand washed garments can be softened with this programme.

The machine performs 1 rinse, followed by a final spin at the max. speed, which can be reduced by depressing SPIN SPEED button.

= Drain

For emptying out the water of the last rinse in programmes with the RINSE HOLD option. Turn first the programme selector dial to O, then select programme and depress the START/PAUSE button.

= Wool

Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics with the “hand washing” care symbol.

= Soak

Select this programme for heavily soiled laundry. Pour the detergent into the compartment This programme is not suitable for wool.

The machine performs a soak at 30°C and stops with the water in the drum. The water can be emptied out by depressing the START/PAUSE button.

Important!

• If the water is not emptied out within 18 hours, the machine empties automatically.

• At the end of the soak (after having emptied out the water) you can select the washing programme. Turn first the programme selector dial to O, then select the programme and depress the START/PAUSE button.

= Spin

Separate spin at the maximum speed for hand washed garments. You can reduce the speed by means of SPIN SPEED button to adapt it to the fabrics to be spun.

= Miniprogramme

This is a complete programme that can be combined

with the following options: SPIN SPEED, NO SPIN, RINSE HOLD and DELAY START. To be used for laundry which is lightly soiled or which needs freshening up. Max load 2 kg. Washing temperature 30°C Programme duration 30 minutes Final spin speed 700 r.p.m.

O = Cancelling

To reset a programme turn the selector dial to O. Now can a new programme be selected.

Operating Sequence

P0006

P0004

WASH

DRY

DOOR

PREWASH

SPIN

END

RINSES

DRAIN

95º

60º

40º

30º

60º

40º

30º

40º

30º

40º

30º

COTTON

DELICATES

SYNTHETICS

WOOL

60º

SPECIAL PROGRAMMES

40º

---

ON / OFF

P0005

Washing only

Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.

1. Load the laundry

Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.

3. Measure out the fabric softener

If required, pour fabric softener into the compartment marked (the amount used must not exceed the “MAX” mark in the drawer). Close the drawer gently.

4. Switch the machine on

To switch the machine on, press the ON/OFF button: the mains-on light comes on.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into the main wash compartment . If you have selected the PREWASH option or the SOAK programme, pour detergent into the compartment marked .

«JETSYSTEM» wash

As the Jetsystem is flexible and adjusts water intake according to wash load size it is not possible to give you exact recommandations as to the amount of detergent that should be used for any one wash. Therefore we recommend that you use approximately 1/3 less than the detergent manufacturer recommends on the packet or bottle, making the appropriate allowances for soft or hard water, and light or heavy soilage of clothes. If you have judged the amount correctly you should expect to see a soft sudsy liquid during the wash. It is not necessary to have a head of lather on the water.

If the programme selector dial is on the Reset O position, three flashing dashes will be displayed. If the programme selector dial is positioned on a wash programme, a flashing zero appears on the display.

5. Select the required programme

Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on.

The display shows the duration of the programme.

+ 23 hidden pages