Zanussi ZHT 610, ZHT 620, ZHT 910, ZHT 920 USER MANUAL
Cooker hood
ZHT 610
ZHT 620
ZHT 910
ZHT 920
INSTALLATION, USE AND MAINTENANCE HANDBOOK
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
2
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Contenents
INSTALLATION .......................................................................................................................... 4
SAFETY WARNINGS........................................................................................................................... 4
Wall installation .................................................................................................................................... 4
Fixing with screws ............................................................................................................................... 4
Fixing with brackets ............................................................................................................................. 5
Wall unit installation ............................................................................................................................. 5
Connecting suction or filter hoods ........................................................................................................ 6
Electrical connection and working test ................................................................................................. 6
USE ............................................................................................................................................. 7
SAFETY WARNINGS........................................................................................................................... 7
Instruction for Use ................................................................................................................................ 7
MAINTENANCE.......................................................................................................................... 8
Synthetic grease filters ......................................................................................................................... 8
Metal grease filters ............................................................................................................................... 8
Charcoal filters ..................................................................................................................................... 8
Lighting ................................................................................................................................................. 9
Cleaning ............................................................................................................................................... 9
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
3
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
INSTALLATION
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
This hood has been designed to be wall-mounted above a cooking hob.It can be installed
under a wall unit or directly onto a wall.It can work either by ducting system (external
discharge)or filter (internal recirculation).
SAFETY WARNINGS
• Before starting the installation,consideration should be given to the difficulties to be
found during installation.The installation work must be undertaken by a qualified and
competent person in conformity to the rules concerning the evacuation of contaminated
air.The manufacturer disclaims all liability for any damage or injury caused as a result
of not following the instructions for installation contained in the following text.
• When used in the extraction mode,the cooker hood ducting must not be connected to
a flue which is used for exhausting fumes from appliances supplied with energy other
than electric,such as a central heating flue or water heating flue.
• When installed,the hood must be positioned at least 65 cm above the hotplate.
• If the room where the cooker hood is to be used contains a fuel burning appliance
such as a central heating boiler then this must be of the room sealed or balanced flue
type.If other types of flue or appliance are fitted,ensure that there is an adequate
supply of air into the room.When the cooker hood is used in conjunction with appliances
supplied with energy other than electric,the negative pressure in the room must not
exceed 0,04 mbar to prevent fumes being drawn back into the room by the cooker
hood.
Wall installation
The hood can be supplied with two different fixing kits:
a)screws,plugs and safety square.
b)screws,plugs and metal brackets.
Fixing with screws
Using the cardboard template,mark and drill
the holes on the wall (2 holes Ø 8 mm see
instructions on the template),insert the plugs
in the holes,tighten both 4,2 x 44,4 screws
(supplied)leaving about 5 mm unscrewed,
hook the hood onto the screws (fig.1)and
secure tightly from inside (fig.2).Mount the
safety square (supplied)above the hood (fig.
3).
Fig.3
4
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Fig.2
Fig.1
GB
Loading...