Zanussi ZHN721 USER MANUAL

MODE D'EMPLOI - GEBRUIKSAANWIJZING BEDIENUNGSANLEITUNG - OPERATING INSTRUCTIONS

FOURS À

ENCASTRER

EINBAU-HERDE

INBOUW-FORNUIZEN

BUILT-IN OVENS

ZHN 721

41

ENGLISH

Madam,

Congratulations on having chosen a quality product from our company. This appliance is very easy to use. Nonetheless, in order to obtain the maximum profit from your new appliance, we suggest you spend a few minutes reading this brochure.

You will find the correct indications for installation, use and mainteinance. We thank you and hope you will enjoy using this new appliance.

CONTENTS

Warnings and important advice	page	43
Using the oven	Page 44
When the oven is first installed	Page	45
Cooking with the traditional oven	Page	46
Cooking tables	Page 47
Cleaning and Maintenance	Page 48
If something goes wrong	Page 49
Assistance and spare parts	Page 49
Guarantee conditions	Page 50
Technical data	Page 51
To the attention of the installer	Page	52
Electrical connection	Page	54

42

WARNINGS AND IMPORTANT ADVICE

These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings.

•This appliance has been designed to be operated by adults and children under supervision. Young children

MUST NOT be allowed to tamper with the controls or play near or with the oven.

•This appliance has been designed for cooking edible foodstuff only and MUST NOT be used for any other purposes.

•It is dangerous to alter the specification in any way.

•For hygiene and safety reasons, this appliance should be kept clean at all times. A build-up of fats or other foodstuff could result in a fire.

•Accessible parts of this appliance may become hot when it is in use. Children should be KEPT AWAY until it has cooled.

•Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by unexperienced persons may cause injury or serious malfunctioning. Refer to your local Zanussi Service Centre. Always insist on genuine Zanussi spare parts.

•Ensure that all control knobs are in the OFF position when not in use.

•Should you connect any electrical tool to a plug near this cooking appliance, ensure that electric cables are not in contact with it and keep them far enough from the heated parts of this appliance.

•If the appliance is out of order, disconnect it from the electric supply.

•Do not leave untensils containing foodstuffs, e. g. fat or oil in or on the appliance. This could cause damage in case the appliance is inadvertently switched on.

•Always place the dripping pan in position to collect fat when using the grill or when cooking meat. Pour a little water into the dripping pan to avoid smoke and unpleasant smells.

•Always use oven gloves to remove pans from the oven.

•It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations.

•Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work.

•Some parts of the appliance are covered by a shockproof plastic film. Remove this film before using the oven.

•Once you removed all packaging from the appliance, ensure that it is not damaged and the electric cable is in perfect conditions. Otherwise, contact your dealer before proceeding with the installation.

•This appliance is meant to be connected to a 230 V electrical supply through a single, double or triphasic connection with earth wiring . An eventual 400V poliphasic connection without earth wire will destroy the oven and the hob, if fitted.

•The manufacturer disclaims any responsability should all the safety measures not be carried out.

OVEN DOOR PROTECTION DEVICE

(MOD. ZHN 721 X)

All our appliances comply with the European Safety Standards. Nevertheless, in order to ensure the highest safety level, and avoid little children to be exposed to the heat when the appliance is operated, it is possible to fit a special protection device to the oven door. This device can be purchased in our Service Force Centres, specifying the relevant code ( 3 5 7 9 1 ) and the Product No. shown on the rating plate. Fitting instructions are provided with the kit package.

43

USING THE OVEN

Control Knob for	Control Knob for
front left hotplate	rear right hotplate

	Thermostat	Oven Function and
	Control Light
		Thermostat Control
		Knob

ZHN 721

		0	0
5	0		3
100

0
5
1	2	2
	00

Control Knob for		Control Knob for
rear left hotplate		front right hotplate

	0	0	0
3	3		3
1	1	1	1
2	2		2

Oven

Control Light

OVEN FUNCTION AND THERMOSTAT CONTROL KNOB (FIG. 1)

Oven Light - The oven light will be on without any cooking function

50-max Conventional cooking - The heat comes from both the top and bottom element, ensuring even heating inside the oven. Temperature can be set from 50 up to 250°C (max.)

Top heating element - The heat comes from the top of the oven only.

Bottom heating element - The heat comes from the bottom of the oven only.

THERMOSTAT CONTROL LIGHT

Once the oven temperature has been selected, the temperature light will come on and remain on until the oven has reached the correct setting; after that, it will go on and off with the thermostat, showing how the temperature is being maintained.

OVEN CONTROL LIGHT

It will come on every time an heating element is set on operation.

All cookings must be carried out with the oven door closed

5	0
100
	0
	5
	1

FO 2167

Fig. 1

0

	2
0
0

44

THE SAFETY THERMOSTAT

This oven is provided with a safety thermostat. In case of malfunctioning of the main thermostat, and consequent over-heating, the safety device will stop the power supply to the appliance. If this happens, call your local Zanussi Service Centre. Under no circumstances should you attempt to repair the appliance yourself.

HOTPLATE CONTROL KNOBS

The Control Knobs for the hotplates (Fig. 2) can be found on the Oven Control Panel.

The energy regulator of the hotplates can be set by means of a 7 positions control knob.

0 = OFF

1 = MINIMUM

3 = MAXIMUM

The intermediate positions give an increasing heating power.

Carefully supervise cookings with fats or oil, since these types of foodstuff can result in a fire, when overheated.

0

3

1

2

FO 2167

Fig. 2

WHEN THE OVEN IS FIRST INSTALLED

Once the oven has been installed:

a)set the thermostat knob to MAX;

b)switch the oven function control knob to conventional cooking ();

c)allow the oven to run empty for approximately 45 minutes;

d)open a window for ventilation.

During this time, an unpleasant odour may be emitted. This is absolutely normal, and is caused by residues of manufacturing.

Once this operation is carried out, let the oven cool down, then clean the oven cavity with a soft cloth soaked in warm soapy water.

Before cooking for the first time, carefully wash the shelf and the dripping pan.

To open the oven door, always catch the handle in its central part (Fig. 3).

FO 2161

Fig. 3

45