Zanussi ZEI6632XBA User Manual

EN

ZEI6640XBA

User Manual

Hob

Contents

Safety information 2
Safety instructions 3
Product description 5
Daily use 7
Hints and tips 9

Care and cleaning 10
Troubleshooting 11
Installation 12
Technical information 15
Energy efficiency 16

Subject to change without notice.

Safety information

Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible if an
incorrect installation and use causes injuries and damages.
Always keep the instructions with the appliance for future
reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep children and pets away from the appliance when it

operates or when it cools down. Accessible parts are hot.

• If the appliance has a child safety device, we recommend you

activate it.

• Cleaning and user maintenance shall not be made by children

without supervision.

• Children of less than 3 years should be kept away unless

continuously supervised.

General Safety

• The appliance and its accessible parts become hot during use.

Do not touch the heating elements.

• Do not operate the appliance by means of an external timer or

separate remote-control system.

2 www.zanussi.com

• Unattended cooking on a hob with fat or oil can be dangerous

and may result in fire.

• Never try to extinguish a fire with water, but switch off the

appliance and then cover flame e.g. with a lid or a fire blanket.

• Do not store items on the cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids should

not be placed on the hob surface since they can get hot.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control and do not

rely on the pan detector.

• If the glass ceramic surface / glass surface is cracked, switch

off the appliance to avoid the possibility of electric shock.

• If the supply cord is damaged, it must be replaced by the

manufacturer, an authorized Service or similarly qualified
persons in order to avoid a hazard.

Safety instructions

Installation

WARNING!

Only a qualified person must install
this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Obey the installation instruction supplied
with the appliance.

• Keep the minimum distance from the other
appliances and units.

• Always be careful when you move the
appliance because it is heavy. Always wear
safety gloves.

• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.

• Protect the bottom of the appliance from
steam and moisture.

• Do not install the appliance adjacent to a
door or under a window. This prevents hot
cookware to fall from the appliance when the
door or the window is opened.

• If the appliance is installed above drawers
make sure that the space, between the
bottom of the appliance and the upper
drawer, is sufficient for air circulation.

• The bottom of the appliance can get hot.
Make sure to install a non-combustile

separation panel under the appliance to
prevent access to the bottom.

• Make sure that the ventilation space of 2
mm, between the worktop and the front of
the below unit, is free. The warranty does not
cover damages caused by the lack of an
adequate ventilation space.

Electrical Connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections should be made by
a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make sure
that the appliance is disconnected from the
power supply.

• Make sure that the electrical information on
the rating plate agrees with the power
supply. If not, contact an electrician.

• Make sure the appliance is installed
correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can make
the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is
installed.

• Use the strain relief clamp on the cable.

www.zanussi.com 3

• Make sure the mains cable or plug (if
applicable) does not touch the hot appliance
or hot cookware, when you connect the
appliance to the near sockets

• Do not use multi-plug adapters and
extension cables.

• Make sure not to cause damage to the
mains plug (if applicable) or to the mains
cable. Contact our Authorised Service
Centre or an electrician to change a
damaged mains cable.

• The shock protection of live and insulated
parts must be fastened in such a way that it
cannot be removed without tools.

• Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.

• If the mains socket is loose, do not connect
the mains plug.

• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.

• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
and contactors.

• The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm.

Use

WARNING!

Risk of injury, burns and electrical
shock.

• Remove all the packaging, labelling and
protective film (if applicable) before first use.

• Use this appliance in a household
environment.

• Do not change the specification of this
appliance.

• Make sure that the ventilation openings are
not blocked.

• Do not let the appliance stay unattended
during operation.

• Set the cooking zone to “off” after each use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on the
cooking zones. They can become hot.

• Do not operate the appliance with wet hands
or when it has contact with water.

• Do not use the appliance as a work surface
or as a storage surface.

• If the surface of the appliance is cracked,
disconnect immediately the appliance from
the power supply. This to prevent an
electrical shock.

• Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the appliance
is in operation.

• When you place food into hot oil, it may
splash.

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release
flammable vapours. Keep flames or heated
objects away from fats and oils when you
cook with them.

• The vapours that very hot oil releases can
cause spontaneous combustion.

• Used oil, that can contain food remnants,
can cause fire at a lower temperature than
oil used for the first time.

• Do not put flammable products or items that
are wet with flammable products in, near or
on the appliance.

WARNING!

Risk of damage to the appliance.

• Do not keep hot cookware on the control
panel.

• Do not let cookware to boil dry.

• Be careful not to let objects or cookware fall
on the appliance. The surface can be
damaged.

• Do not activate the cooking zones with
empty cookware or without cookware.

• Do not put aluminium foil on the appliance.

• Cookware made of cast iron, aluminium or
with a damaged bottom can cause
scratches on the glass / glass ceramic.
Always lift these objects up when you have
to move them on the cooking surface.

• This appliance is for cooking purposes only.
It must not be used for other purposes, for
example room heating.

Care and cleaning

• Clean regularly the appliance to prevent the
deterioration of the surface material.

• Deactivate the appliance and let it cool
down before you clean it.

• Disconnect the appliance from the electrical
supply before maintenance.

• Do not use water spray and steam to clean
the appliance.

4 www.zanussi.com

• Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads,
solvents or metal objects.

Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for
information on how to discard the appliance
correctly.

• Disconnect the appliance from the mains
supply.

• Cut off the mains cable and discard it.

Product description

Cooking surface layout

145 mm

180 mm

210 mm

180 mm

1

1

1 1

2

1

Induction cooking zone

2

Control panel

Control panel layout

1 2 4 53

6789

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which
functions operate.

www.zanussi.com 5

Sen-

sor

field

Function Comment

1

ON / OFF To activate and deactivate the hob.

2

Lock / The Child Safety Device To lock / unlock the control panel.

3

- Heat setting display To show the heat setting.

4

- Timer indicators of cooking
zones

To show for which zone you set the time.

5

- Timer display To show the time in minutes.

6

- To select the cooking zone.

7

/

- To increase or decrease the time.

8

/

- To set a heat setting.

9

Power function To activate and deactivate the function.

Heat setting displays

Display Description

The cooking zone is deactivated.

- / -

The cooking zone operates.

Automatic Heat Up function operates.

Power function operates.

+ digit

There is a malfunction.

A cooking zone is still hot (residual heat).

Lock / The Child Safety Device function operates.

Incorrect or too small cookware or no cookware on the cooking zone.

Automatic Switch Off function operates.

Residual heat indicator

WARNING!

There is a risk of burns from

residual heat.

The induction cooking zones make the heat
necessary for cooking process directly in the
bottom of the cookware. The glass ceramic is
heated by the heat of the cookware.

6 www.zanussi.com