Zanussi ZCG62226, ZCG61256, ZCG61266, ZCG61236, ZCG61216 User Manual

...
EN
ZCG61226 ZCG61206 ZCG61216 ZCG61236 ZCG61256 ZCG61266 ZCG62226
User Manual
Cooker
DZ EG IQ JO LB LY
MA SD SY TN
Safety information 2 Safety instructions 3 Product description 6 Before first use 8 Hob - Daily use 8 Hob - Hints and tips
10
Hob - Care and cleaning
10
Oven - Daily use 11 Oven - Clock functions 13 Oven - Using the accessories 13 Oven - Hints and tips 14 Oven - Care and cleaning 17 Troubleshooting
19
Installation
21
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent disability.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
Cleaning and user maintenance shall not be made by children
without supervision.
General Safety
Only a qualified person must install this appliance and replace
the cable.
Do not operate the appliance by means of an external timer or
separate remote-control system.
2 www.zanussi.com
Unattended cooking on a hob with fat or oil can be dangerous
and may result in fire.
Never try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire blanket.
Do not store items on the cooking surfaces.
Do not use a steam cleaner to clean the appliance.
Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
Remove any spillage from the lid before opening. Let the hob
surface cool down before closing the lid.
Internally the appliance becomes hot when in operation. Do not
touch the heating elements that are in the appliance. Always use oven gloves to remove or put in accessories or ovenware.
Before maintenance cut the power supply.
Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the glass door since they can scratch the surface, which may result in shattering of the glass.
If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
Safety instructions
This appliance is suitable for the following markets:
DZ EG IQ JO LB LY MA SD SY TN
Installation
WARNING!
Only a qualified person must install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Obey the installation instruction supplied with the appliance.
Always be careful when you move the appliance because it is heavy. Always wear safety gloves.
Do not pull the appliance by the handle.
The kitchen cabinet and the recess must have suitable dimensions.
Keep the minimum distance from the other appliances and units.
Make sure that the appliance is installed below and adjacent safe structures.
Parts of the appliance carry current. Close the appliance with furniture to prevent touching the dangerous parts.
The sides of the appliance must stay adjacent to appliances or to units with the same height.
Do not install the appliance on a platform.
Do not install the appliance adjacent to a door or under a window. This prevents hot cookware to fall from the appliance when the door or the window is opened.
www.zanussi.com 3
Electrical Connection
WARNING!
Risk of fire and electrical shock.
All electrical connections should be made by a qualified electrician.
The appliance must be earthed.
Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician.
Always use a correctly installed shockproof socket.
Do not use multi-plug adapters and extension cables.
Do not let mains cables touch or come near the appliance door, especially when the door is hot.
The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
If the mains socket is loose, do not connect the mains plug.
Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.
Fully close the appliance door, before you connect the mains plug to the mains socket.
Gas connection
All gas connections should be made by a qualified person.
Before installation, make sure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible.
Make sure that there is air circulation around the appliance.
The information about the gas supply is on the rating plate.
This appliance is not connected to a device, which evacuates the products of combustion. Make sure to connect the
appliance according to current installation regulations. Pay attention to requirements regarding adequate ventilation.
Use
WARNING!
Risk of injury and burns. Risk of electrical shock.
Use this appliance in a household only.
Do not change the specification of this appliance.
Make sure that the ventilation openings are not blocked.
Do not let the appliance stay unattended during operation.
Deactivate the appliance after each use.
Be careful when you open the appliance door while the appliance is in operation. Hot air can release.
Do not operate the appliance with wet hands or when it has contact with water.
Do not use the appliance as a work surface or as a storage surface.
WARNING!
Risk of fire and explosion
Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.
The vapours that very hot oil releases can cause spontaneous combustion.
Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time.
Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
Do not let sparks or open flames to come in contact with the appliance when you open the door.
Open the appliance door carefully. The use of ingredients with alcohol can cause a mixture of alcohol and air.
WARNING!
Risk of damage to the appliance.
To prevent damage or discoloration to the enamel:
– do not put ovenware or other objects in
the appliance directly on the bottom.
– do not put water directly into the hot
appliance.
4 www.zanussi.com
– do not keep moist dishes and food in the
appliance after you finish the cooking.
– be careful when you remove or install
the accessories.
Discoloration of the enamel has no effect on the performance of the appliance. It is not a defect in the sense of the warranty law.
Use a deep pan for moist cakes. Fruit juices cause stains that can be permanent.
Do not keep hot cookware on the control panel.
Do not let cookware boil dry.
Be careful not to let objects or cookware fall on the appliance. The surface can be damaged.
Do not activate the cooking zones with empty cookware or without cookware.
Do not put aluminium foil on the appliance or directly on the bottom of the appliance.
Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches. Always lift these objects up when you have to move them on the cooking surface.
Provide good ventilation in the room where the appliance is installed.
Use only stable cookware with the correct shape and diameter larger than the dimensions of the burners.
Make sure the flame does not go out when you quickly turn the knob from the maximum to the minimum position.
Use only the accessories supplied with the appliance.
Do not install a flame diffuser on the burner.
This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.
Care and Cleaning
WARNING!
Risk of injury, fire, or damage to the appliance.
Before maintenance, deactivate the appliance. Disconnect the mains plug from the mains socket.
Make sure the appliance is cold. There is the risk that the glass panels can break.
Replace immediately the door glass panels when they are damaged. Contact the Authorised Service Centre.
Be careful when you remove the door from the appliance. The door is heavy!
Clean regularly the appliance to prevent the deterioration of the surface material.
Remaining fat or food in the appliance can cause fire.
Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
If you use an oven spray, obey the safety instructions on the packaging.
Do not clean the catalytic enamel (if applicable) with any kind of detergent.
Do not clean the burners in the dishwasher.
Lid
Do not change the specification of the lid.
Clean the lid regularly.
Do not open the lid, when there are spills on the surface.
Before you close the lid turn all burners off.
Do not close the lid until the hob and oven are completely cold.
Glass lid can shatter, when heated (if applicable).
Keep the lid glass open, while the oven is in operation (if applicable).
Internal light
The type of light bulb or halogen lamp used for this appliance is only for household appliances. Do not use it for house lighting.
WARNING!
Risk of electrical shock.
Before replacing the lamp, disconnect the appliance from the power supply.
Only use lamps with the same specifications.
Gas Grill
WARNING!
Risk of fire, explosion and burns.
Do not leave the appliance unattended during grilling. Accessible parts become hot.
Keep children away when the grill is in use.
Do not put the oven shelf with food on the highest shelf level.
www.zanussi.com 5
Disposal
WARNING!
Risk of injury or suffocation.
Contact your municipal authority for information on how to discard the appliance correctly.
Disconnect the appliance from the mains supply.
Cut off the mains cable and discard it.
Remove the door catch to prevent children and pets to get closed in the appliance.
Flat the external gas pipes.
Service
To repair the appliance contact an Authorised Service Centre.
Use original spare parts only.
Product description
Cooker specification
Check the table to see your appliance's detailed specification.
Model de-
nomination
and PNC
number
ZCG61226XA
943006104
ZCG61206WA
943006107
ZCG61206DA
943006108
ZCG61266WA
943006276
ZCG61216DA
943006110
ZCG61236XA
943006138
ZCG61256WA
943006139
ZCG61256XA
943006140
ZCG61266WA
943006150
ZCG61266XA
943006152
ZCG61236WA
943006269
ZCG62226XA
943006388
Initial gas set­tings
Natu-
ral gas
LPG
X X X X X X X X X X X X
Additional gas injectors
X X X X X X X X
Hob integra­ted ignition on the control knob
Hob ignition on the spark generator button
X X X X X X X X X X X X
Oven integra­ted ignition on the control knob
Oven ignition on the spark generator button
X X X X X X X X
6 www.zanussi.com
Model de-
nomination
and PNC
number
ZCG61226XA
943006104
ZCG61206WA
943006107
ZCG61206DA
943006108
ZCG61266WA
943006276
ZCG61216DA
943006110
ZCG61236XA
943006138
ZCG61256WA
943006139
ZCG61256XA
943006140
ZCG61266WA
943006150
ZCG61266XA
943006152
ZCG61236WA
943006269
ZCG62226XA
943006388
Hob thermo­couple
X X X X X X X
Oven thermo­couple
X X X X X X X X X X X X
Oven clean ing
Enam-
el
X X X X X X X X X X
Cata-
lytic
X X
Pan sup­port
Enam-
el
X X X X X X X X X X X
Cast
iron
X
General overview
10
7
9
8
21 53 4
6
1
2
3
4
5
1
Button for the turnspit
2
Button for the spark generator
3
Knob for the Minute Minder
4
Knob for the oven functions
5
Button for the lamp
6
Knobs for the hob
7
Grill
8
Lamp
9
Turnspit hole
10
Shelf positions
www.zanussi.com 7
Cooking surface layout
1 2 3
5 4
1
Auxiliary burner
2
Steam outlet - number and position depend on the model
3
Semi-rapid burner
4
Semi-rapid burner
5
Rapid burner
Accessories
Wire shelf For cookware, cake tins, roasts.
Baking tray For cakes and biscuits.
Turnspit For roasting larger joints of meat and poultry.
Storage compartment The storage compartment is below the oven cavity. To use the compartment, lift the lower front door then pull it down.
WARNING!
The storage compartment can become hot when the appliance operates.
Coffee pot (if applicable) For coffee makers and small pans.
Before first use
WARNING!
Refer to Safety chapters.
Initial Cleaning
Remove all accessories from the appliance.
Refer to "Care and cleaning" chapter.
Clean the appliance before first use. Put the accessories back to their initial position.
Preheating
Preheat the empty appliance to burn off the remaining grease.
1. Set the maximum temperature.
2. Let the appliance operate for approximately
1 hour.
WARNING!
Accessories can become hotter than usual.
The appliance can emit an odour and smoke. This is normal. Make sure that the airflow is sufficient.
Let the oven cool down. Dampen a soft cloth with warm water and a little mild washing-up liquid and use this to clean the oven cavity.
Hob - Daily use
WARNING!
Refer to Safety chapters.
8 www.zanussi.com
Ignition of the hob burner
Always light the burner before you put on the cookware.
WARNING!
Be very careful when you use open fire in the kitchen environment. The manufacturer declines any responsibility in case of the flame misuse.
The spark generator can start automatically when you switch on the mains, after installation or a power cut. It is normal.
In the absence of electricity you can ignite the burner manually.
Ignition of a hob burner with the thermocouple
For manual ignition put the flame near the burner. Push the knob for the hob down and turn it counterclockwise to the maximum gas
flow position
.
Ignition of a the hob burner without the thermocouple
For all hobs without thermocouple first turn the knob and then push the knob down. Release knob when the burner lights.
For ignition with spark generator button push and hold the spark generator button
. At the same time push the knob for the hob down and turn it counterclockwise to the
maximum gas flow position
. Release the
spark generator button when burner lights.
Keep the knob for the hob pushed for equal or less than 10 seconds to let the thermocouple warm up. If not, the gas supply is interrupted.
Adjust the flame after it is regular.
WARNING!
Do not keep the knob pushed for more than 15 seconds. If the burner does not light after 15 seconds, release the knob, turn it into the off position and try to light the burner again after minimum 1 minute.
If after some tries the burner does not light, check if the crown and its cap are in the correct position.
If the burner accidentally goes out, turn the knob to the off position and try to light the burner again after minimum 1 minute.
Burner overview
A
B
D
C
A
B
C
A. Burner cap B. Burner crown C. Ignition candle (if applicable) D. Thermocouple (if applicable)
Turning the burner off
To put the flame out, turn the knob to the off position .
www.zanussi.com 9
Loading...
+ 19 hidden pages