Zanussi Z1080 User Manual

Upright Vacuum Cleaner

Household Type

Owner’s Guide
Models Z1300, Z1400,
Z4300 and Z4400 Series

Index

Important User Information ............2

Service Information ........................4

Guarantee ......................................4

Assembly .....................................5-6

Thermal Cut-Off .......................3 & 7

Use .................................................7

Accessories .................................8-9

Hose Blockage ........................10-11

Brush Roll .....................................12

Brush Roll Belt .............................12

Dust Bag/Cyclonic Cassette ........13

Filters .......................................14-15

Dirt Alert Feature .......................... 15

Problem Solving ...........................16

Customer Order Form ..................17

IMPORTANT

For any advice

on your cleaner and to

order dust bags, filters

and accessories

please telephone

Electrolux Customer

Care

08706 055055

IMPORTANT USER INFORMATION

IT IS MOST IMPORTANT THAT THIS INSTRUCTION BOOK SHOULD BE RETAINED WITH THE APPLIANCE FOR
FUTURE REFERENCE. SHOULD THE APPLIANCE BE SOLD OR TRANSFERRED TO ANOTHER OWNER, OR
SHOULD YOU MOVE HOUSE AND LEAVE THE APPLIANCE, ALWAYS ENSURE THAT THE BOOK IS SUPPLIED
WITH THE APPLIANCE IN ORDER THAT THE NEW OWNER CAN BE ACQUAINTED WITH THE FUNCTIONING
OF THE APPLIANCE AND THE RELEVANT WARNINGS.

THESE WARNINGS ARE PROVIDED IN THE INTEREST OF SAFETY. YOU MUST READ THEM CAREFULLY
BEFORE INSTALLING OR USING THE APPLIANCE.

• This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.

• It is dangerous to alter the specifications or modify the product in any way.

• Always store your vacuum cleaner in a dry place away from damp atmosphere and do not use it to pick up water or other liquids.

• Do not use the appliance in the presence of flammable gasses.

• Never allow anyone to have access to the rotating brush of the appliance (if fitted) unless the appliance is disconnected from the mains supply.

• Never leave the appliance running unattended.

• Remove the plug from the wall socket before attempting any form of user maintenance specified in the user instruction booklet.

• Do not carry or drag your vacuum cleaner by the mains supply cable.

• Do not tug at the mains supply cable to remove the plug from the wall socket.

• Ensure the mains supply cable is kept well away from the rotating brushes (where fitted) of your appliance whilst in operation.

• Keep the mains supply cable away from heat, oil, sharp edges and rough surfaces. Always ensure that the cable is not damaged in any way.

• Never pick up hot cinders or lighted cigarette ends.

• Extreme care is required when cleaning stair carpets with your appliance. Ensure that your cleaner is in a stable position at the bottom of

the stairs, and take care not to stretch the hose beyond its actual length. Always ensure when using your cleaner on the stair treads that
you keep one hand firmly on the appliance.

• Dust bags and filters (depending on model) should be changed at regular intervals as stated in your instruction booklet.

• Always use genuine Electrolux dust bags and filters.

• Do not place the air freshener loose inside the dust bag compartment or cyclonic dust cup.

• Do not use the appliance without a dust bag or with the dust cover removed or dust cup.

• When fitting and changing the accessories always follow the instructions in the instruction booklet.

• Under no circumstances should you attempt to repair the appliance yourself. Repairs undertaken by unauthorised or inexperienced persons

may cause injury and/or serious malfunctioning.

• This appliance should be serviced by authorised Electrolux personnel and only genuine Electrolux spare parts should be used.

• The supply cable fitted to your machine is of two core construction. Where a moulded-on plug is not fitted the leads at the end of the

cable are not prepared for a specific type of plug.

As a general guide to fitting any plug

• Ensure the lengths of wire inside the plug are prepared correctly.

• Connections should be firmly made after all conductor strands are entered into the terminal posts.

• When preparing the cable ends take care not to damage the outer sheath, or the insulation surrounding the inner conductors.

• Tighten all screws.

• Replace the top cover of the plug and secure.
Extension Cable

• If using an extension cable at any time always ensure that the insulation sheath is in good condition and is not damaged in any way.

• Make sure that the socket is fitted to the extension cable correctly, if in doubt have it checked by a Qualified electrician.
Double Insulation

• Your vacuum cleaner is double insulated. This means that all external parts are electrically insulated from the mains. This is
done by placing insulation barriers between the electrical and mechanical components, making it unnecessary for the cleaner
to be earthed.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed informa­tion about recycling of this product, please contact your local city office, your household waste disposal service or the shop
where you purchased the product.

2

BEFORE YOU START

CHECK THE VOLTAGE

First check the voltage shown on the data plate (see rear view) to make sure that the cleaner is of the correct voltage for your electricity
supply. If it is not, do not use the cleaner but refer back to your dealer.

CONNECTING TO YOUR ELECTRICITY SUPPLY
Permanently connected to the cleaner is a mains supply (2-core) cable fitted with a non-rewirable plug incorporating a 13A fuse.
In the event of the fuse requiring replacement the fuse cover should be removed using a small screwdriver. The old fuse MUST be

replaced by a 13A ASTA approved BS1362 fuse or a BSI approved fuse. The cover must be replaced before the plug is used again. In the
event of loss of the fuse cover, replacements can be obtained from your Electrolux Retailers and must be of the same colour as indicated
by the coloured insert on the base of the plug.
If difficulty is experienced in obtaining a replacement, contact Electrolux on 08706 055055.

In no circumstances must the plug be used without a correct fuse cover fitted.

If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13 amp socket in another
part of your home.
The wires in the mains cable of this appliance are coloured in accordance with the following code: Blue: Neutral. Brown: Live.
As the colours of the wires in the mains cable of this appliance may not correspond with the coloured markings identifying the terminals in
your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
If using a three-pin plug, do not make any connection to the terminal marked with the letter E or by the earth symbol or coloured green or
green-and-yellow. This cleaner is double insulated and no earth connection is necessary.
It is in your interest to ensure that the plug is correctly attached to the mains cable. In case of doubt, have it done by a qualified electrician,
as Electrolux cannot regard the repair of faults on the plug connection as a service that can be given free of charge under the terms of the
guarantee.

Fuse
Cover

13 Amp Fuse

Fuse

Blue

WARNING

The brush in the cleaning head rotates at high speed and can cause damage to the mains supply cable if the cleaner passes over it
during cleaning operations.
Care should be taken to ensure that this does not happen. If the cleaning head has accidentally passed over the mains supply cable
the following action should be taken:

1. Switch off and remove the plug from the socket outlet.

2. Examine the mains supply cable for damage (only after removing the plug from the socket outlet).

3. If there is any sign of damage to the supply cable it MUST be renewed. The repair MUST be carried out by an Electrolux Service Agent

or a similar qualified person.

4. NEVER use the machine with a damaged mains supply cable.
Proprietary carpet conditioning and air freshening materials

After using proprietary carpet conditioning powders, it is recommended that the dust bag or filters be changed. Some of these preparations
contain substances which if left in the vacuum cleaner for extended periods could damage the plastic mouldings which form the structure
of the cleaner.
Many air fresheners, household deodorants, sprays and polishes contain a highly flammable gas propellant.
Because of this, it is particularly important that these products are used strictly in accordance with the relevant manufacturer’s
instructions.
It is essential that none of the above products are sprayed directly into the vacuum cleaner or any of its filters, hose assembly, dust bag
chamber or dust cup.

Brown

Cord
Clamp

Thermal Cut Off

This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner suddenly shuts
off, push the switch pedal once and unplug the cleaner. Check the cleaner for a possible source of overheating such as a full bag,
a blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the
cleaner. After the 30 minute period, plug the cleaner back in and turn on the switch. If the cleaner still does not run, please call
Electrolux on 08706 055055.

3

SERVICE

Should you require service on your Electrolux cleaner, please telephone Electrolux on 08706 055055. Before requesting service,
please check whether your problem is covered under Service Checklist (see below).

New filter pads, dust bags, brush rollers and drive belts can be obtained from Electrolux Retailers. If difficulty is experienced in
obtaining spares, please contact Electrolux on 08706 055055.

SERVICE CHECKLIST

• If your cleaner will not operate, check the plug connection, plug fuse and mains fuse.

• Never allow the dust bag to become so full that it impedes the air-flow, thus reducing the cleaning efficiency of the machine. The

character of household dust and its effect on the air-flow through the machine may vary considerably. Fluffy dust allows air to pass
through readily whereas fine powdery dust or proprietary cleaning powders, pack tightly in the dust bag, offering greater resistance to
air-flow and will reduce cleaning efficiency if the bag becomes overloaded. Always ensure that you have a spare genuine Electrolux dust
bag.

• Always store your cleaner and spare dust bags/filters in a dry place.

• Renew the filter pads three or four times a year. This is essential to ensure continued high filtration of dust particles.

• Sucking up such items as stockings, clippings of cloth, sizeable pieces of paper, wrappings from cigarette packets or sweets etc.,
may block the hose. Electrolux regrets that the clearing of blocked hoses cannot be regarded as service that can be given free of
charge, under the guarantee. Should a blockage occur, first disconnect the cleaner from the electricity supply, refer to section headed
“Blockages”. If these operations are not successful, contact us on 08706 055055.

• Never pick up hot cinders or lighted cigarette ends.

• Make certain that your cleaner does not come into contact with water or any other liquid. It is not designed as a wet pick up

cleaner, and must never be used on damp carpets or wet floors.

Important - in the event of the mains supply cable of this vacuum cleaner requiring replacement, we recommend that this be carried
out by Electrolux Service Staff.

Spares

New filters, dust bags, brush rollers and drive belts can be obtained from Authorised Electrolux Dealers and electrical retailers.
If difficulty is experienced in obtaining spares please see the Mail order form on page 17 or call us on 08706 055055.

Guarantee

This guarantee is in addition to your statutory and other legal rights.

This product is for household use only.

Electrolux products are carefully designed, manufactured, tested and inspected and, in consequence, we undertake to
replace or repair any part found to be defective in material or workmanship, within one year of delivery to the original
purchaser, free of charge. You may be required to take the product to your nearest service provider if the product requires
attention during the first year.

There are certain conditions which may invalidate this guarantee:
a. It is dependent upon the appliance being correctly installed and used in accordance with the Company’s instructions

under normal domestic conditions within the United Kingdom or the Republic of Ireland.

b. Service at all times must be carried out by an Electrolux Service Representative or authorised agent.
c. The guarantee may be invalidated by unauthorised repair or modification of the appliance.
d. You may be charged by Electrolux if you call for an engineer to resolve a problem that we believe is covered in the

instruction booklet. (example: blocked/dirty filters)

The Company does not accept liability for defects arising from neglect, misuse or accident. This guarantee excludes such
normal wearing parts as drive belts, brushes, filters and dust bags as the life of these depends upon the amount and nature
of use.

Proof of the date of purchase will be required before service under guarantee is provided. Please call 08706 055055 for
assistance.

Important:

For future reference we suggest you record the following details here, and keep the receipt with the handbook as proof of
purchase.

Purchased from ______________________________________________

Date purchased _______________Model no _______________________

4

HOW TO ASSEMBLE

CAUTION: Assemble the cleaner before using.

NOTE: Features may vary by model yet all parts assemble the same.

Step A Attach Hose

IMPORTANT:

Hose

MUST BE

inserted

before attaching

the handle.

Notch

2

Step B Attach Handle

CAUTION: Do not catch cord under handle.

Tab

1

Ledge

3

Groove

Hose
Adapter

Tab

4

1. Locate the tab on the hose adapter of the extension hose

(shortest end).

2. Insert hose adapter into opening on top of unit. The hose

adapter tab must be placed all the way down into the
notch.

Groove

3. From rear of cleaner, align handle with groove and
slide onto cleaner. If necessary, use thumb and finger
pressure to slide handle into position.

4. Once handle is in place, check that the hose adapter
tab is completely secure under the ledge of the
handle.

5. Attach handle with two 5/8 inch screws in the
assembly packet. Use either a slotted or Phillips® head
screwdriver.

5

Step C Store Hose and Accessories Step D Check Disposable Dust Bag

Crevice
Tool

Extension
Wand or
Wands

HEPA Filter
(On some
models)

Combination
Tool

Hook

Carrying
Handle

8

10

8. Remove front cover, grasp both sides of bag
cover near top. Push thumbs against center
of cover and pull out on sides.

9

Hose
Adapter

9. Check to be sure the paper bag collar is
secure with the hose adapter inside the paper
bag collar.

10. Replace front bag cover.

Paper Bag
Collar

Or Check Cyclonic Cassette

Cassette Handle

Tab

Hose
Retainer

Step E Store Electrical Cord

11

11

Cord
Retainer

6

Cord
Retainer

12

Cord
Hook

12

Cord
Hook

Make sure that the cyclonic cassette is fully seated
in the vacuum. Place thumbs on cyclonic cassette
(marked by arrows above) and push firmly until it
clicks home.

NOTE: Do not lift cleaner by cassette handle,

use carrying handle on the back of
cleaner. See illustration in Step C.

11. You will find your cord retainer either at the
bottom of the upper cord hook or on the
handle above the upper cord hook. Firmly
push the electrical cord down into either cord
retainer. This will place the cord out of the way
the next time you vacuum.

12. Next wind the cord around the two cord hooks
on the left side of cleaner. On some models

the upper cord hook turns to release the cord.
Turn the hook up to store the cord.

NOTE: For easier access to bag compartment/

dust cup when you store the electrical
cord use a figure 8 pattern.

13. Secure the plug to the cord to prevent
unwinding.