Zanussi Z 100 User Manual
Specifications and Main Features
- Length: 23.6 inches
- Full length: 22.4 inches
- Full length with the door open: 47.2 inches
- Width: 33.4 inches
- The amount of place setting in IEC: 12
- Input Power: 220/240tV 50Hz
- Washing Motor Output: 250 W
- Heating Elements: 2570 W
- Total Consumption: 2820 W
- Water supply Pressure: 7 psi-110 psi
Frequently Asked Questions
Q: Where do I go about turning on the dish washer?
A: To turn on the dish washer, push on the select wash programme button that you need. Then the economy drying button if need be, the On-off pushbutton next, and lastly the Start control.
Q: What do I do in case the machine did not turn on?
A: Ensure that the door is completely shut, the water supply is turned on, the electrical switch is turned on, and the fuses of the wiring system are in working condition.
Q: Are you able to wash wooden or horn cutlery in the dishwasher?
A: No, it is not appropriate to wash wooden or horn ukiyo-e cutlery that have glue attached to the handles in the dishwasher.
Q: What can be done in case my crockery has limestone deposits on them?
A: Check the salt container and the rinse aid where you should ensure that there is an adequate amount of both available.
Q: Do I need to refill the salt for the water softener and if yes, then how often?
A: Depending on the hardness of water and the use of it, the salt refill indicator normally ranges between 10 and 20, and this would be the indicator as to when to refill the salt.
User Manual
Loading...