Zanussi WJS 1465 W, WJS 1265 W, WJS 1665 W User Manual

WASHER-DRYER
SYNTHETICS DELICATES
COTTONS
WOOL
60°C 50°C
90°C
40°C
RINSE HOLD
S
T
A
R
T
/
P
A
U
S
E
R
E
S
E
T
DELAY
WJS 1265 W
SKIP
EXTRA DRY
STORE DRY
IRON DRY
COTTONS
SYNTHETICS
D
R
Y
I
N
G
T
I
M
E
HAND WASH
PREWASH
EXTRA RINSE
QUICK WASH
F
A
B
R
I
C
S
O
P
T
I
O
N
S
S
P
I
N
S
P
E
E
D
T
E
M
P
E
R
A
T
U
R
E
A
U
T
O
D
R
Y
30°C
COTTONS
STORE DRY
SYNTHETICS
O
N
/
O
F
F
WJS 1265 W WJS 1465 W WJS 1665 W
132999022
INSTRUCTION BOOKLET
GB
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.
These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
Installation
This appliance is heavy. Care should be taken when moving it.
It is dangerous to alter the specifications or attempt to modify this product in any way.
All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions.
Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.
Child Safety
This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.
Pets and children have been known to climb into washer-dryers. Please check your drum before use.
The glass door becomes very hot during the washing and drying cycle. Keep children away from the vicinity of the appliance whilst it is in operation.
Keep all packaging well away from children.
Keep all detergents in a safe place out of children’s
reach.
Use
Always unplug the appliance and turn off the water supply after use.
Do not overload the appliance. See relevant section in the instruction book.
Only wash and dry fabrics which are designed to be machine washed and dried. If in doubt, consult the care label on the clothes.
Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing
frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.
Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.
Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.
Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.
Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.
As some duvets and eiderdowns should be washed/dried in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine.
The users should always check that they have not left their gas lighters (disposable or otherwise) in their clothing.
Never tumble dry items that have had contact with chemicals such as dry cleaning fluid.These are of a volatile nature and could cause an explosion. Only tumble dry items which have been washed in water or require airing.
Plastic detergent dispensers should not remain in the drum during the drying cycle, as the plastic used is not designed to withstand the heat. If you wish to wash-through-to-dry you should use the conventional detergent dispenser drawer.
Leave the porthole door slightly ajar between washes to preserve the door seal.
Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Zanussi Service Force Centre. Always insist on genuine Zanussi spare parts.
2
Contents
For the User
Important Safety Information Your New Washer-Dryer Description of the Appliance
Door locked light 5 Detergent dispenser drawer 5
The Control Panel Operating sequence
Washing 11 Load the laundry 11 Measure out the detergent 11 Measure out the fabric softener 11 Switch the machine on 11 Select the required programme/fabric 11 Select the temperature 12 Select the spin speed or the RINSE HOLD option 12 Select the desired options 12 Select the DELAY TIME 12 Start the programme 12 How to change a programme during its cycle 13 How to cancel a programme during its cycle 13 How to open the door during the cycle of a programme 13 End of programme 13
Drying 2.5 kg of cotton 14 Autodrying 2 kg of synthetics 14
6-10
11-14
Maintenance and Cleaning
Descaling 20 After each wash 20
2
Maintenance wash 20
4
External cleaning 20 Cleaning the dispenser drawer 20
5
Cleaning the drawer recess 20 Cleaning the filter 20 The dangers of freezing 21
Something Not Working Service and Spare Parts Guarantee Conditions Zanussi Service Force
For the Installer
Installation Instructions Technical Specifications
Unpacking 28 Positioning 28 Water inlet 29 Water drainage 29 Levelling 30 Special conditions 30 In the interest of the environment 30 Electrical connection 31
20-21
22-23
23
24
25-26
27
27
Washing and Drying Hints
Which detergent to use?.... 16
And in which form? 16
Wash Care Symbols Washing Programmes Drying Programmes
15
17
18
19
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions Hints and tips Environmental information
3
Your New Washer-Dryer
Your new washer-dryer, fitted with the Zanussi “JET SYSTEM”, meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.
Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type of fabric.
It is gentle with your laundry, simple to use and easy to care for.
The special wool programme with its new delicate wash system treats your woollens with extreme care.
The anti-unbalance device ensures that the machine remains stable when spinning.
Automatic cooling of the wash water to 60°C
before draining, with the 90°C programme. This reduces thermal shock to fabrics, helping to prevent creasing.
The two drying programmes will give your wash that soft, relaxed feel whatever the weather.
Ecological hints
To save water and energy and help protect the environment, we recommend that you follow these hints:
Adjust the quantity of detergent according to the hardness of your water supply, the amount of laundry and the degree of soiling.
Select a “Quick” programme for lightly soiled laundry.
A programme without prewash is sufficient for normally soiled laundry.
Try to load the maximum drying capacity of the machine as small loads are uneconomical.
Always load well spun laundry. The higher the spin speed, the lower the electricity consumption and the shorter the drying times.
In the interest of the environment
Materials marked with the symbol are recyclable.
Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.
When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside.
Help to keep your country tidy - use authorised disposal sites for your old appliance.
How do we help to protect the environment? We use recycled paper!
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the wash load manually and select a spin programme. For more detailed information see the section headed "Something Not Working".
4
Description of the Appliance
C0063
SYNTHETICS
DELICATES
COTTONS
WOOL
60°C
50°C
90°C
40°C
1200 900 700 500
RINSE HOLD
S
T
A
R
T
/
P
A
U
S
E
R
E
S
E
T
DE
LA
Y
WJS 1265 W
SKIP
EXTRA DRY
STORE DRY
IRON DRY
COTTONS
SYNTHETICS
D
R
Y
I
N
G
T
I
M
E
HAND WASH
PREWASH
EXTRA RINSE
QUICK WASH
F
A
B
R
I
C
S
O
P
T
I
O
N
S
S
P
I
N
S
P
E
E
D
T
E
M
P
E
R
A
T
U
R
E
A
U
T
O
D
R
Y
30°C
COTTONS
STORE DRY
SYNTHETICS
O
N
/
O
F
F
6
5
4
3
1 2
1 Detergent dispenser drawer
2 Control Panel
3 Door locked light
4 Door opening handle
5 Filter
6 Adjustable feet
Door locked light
It stays on during the whole programme indicating that the door is locked. When the light goes out, the door can be opened (see page 13).
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
5
The Control Panel
SYNTHETICS
DELICATES
COTTONS
WOOL
60°C
50°C
90°C
40°C
1200
900
700
500
RINSE HOLD
S
T
A
R
T
/
P
A
U
S
E
R
E
S
E
T
DELAY
WJS 1265 W
SKIP
EXTRA DRY
STORE DRY
IRON DRY
COTTONS
SYNTHETICS
D
R
Y
I
N
G
T
I
M
E
HAND WASH
PREWASH
EXTRA RINSE
QUICK WASH
F
A
B
R
I
C
S
O
P
T
I
O
N
S
S
P
I
N
S
P
E
E
D
T
E
M
P
E
R
A
T
U
R
E
A
U
T
O
D
R
Y
30°C
COTTONS
STORE DRY
SYNTHETICS
O
N
/
O
F
F
12 3 4 5 6 7 8910111213
1 ON/OFF button
Press this button to switch the machine on. The display (9) will show three blinking dashes or a blinking zero. You will find more detailed explanations on page 7 (see “DISPLAY”). Press the ON/OFF button again to switch the machine off.
2 MAINS-ON light
This light is connected to the ON/OFF button. It lights up when you press the button, and goes out when you press it again.
3 FABRICS button
Press this button repeatedly to select the programme on the basis of the type of laundry to be washed. The light relevant to the selected programme will light up. The machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating buttons 4 and 5.
Hand wash
When you select this programme, you obtain a particularly delicate washing, suitable for articles of clothing whose label indicates that they must be hand­washed .
4 TEMPERATURE button
Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the machine. The relevant light will light up.
Maximum temperatures are 90°C for cotton, 60°C for synthetic fabrics, 40°C for delicate fabrics, wool and fabrics to be hand-washed (HAND WASH programme).
Important!
By pressing the TEMPERATURE and SPIN SPEED buttons simultaneously, the acoustic signal at the end of the cycle is deactivated. By pressing these 2 buttons again the acoustic signal is reactivated.
5 SPIN SPEED button
Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the machine. The relevant light will light up.
Maximum speeds are:
• for cotton: 1,600, 1,400 or 1,200 rpm depending on the model;
• for synthetic fabrics, wool, and fabrics to be hand­washed: 900 rpm;
• for delicate fabrics: 700 rpm.
RINSE HOLD position : when you choose this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry.
At the end of the cycle, the START/PAUSE button light will flash, to indicate that the water must be drained and a static zero will appear on the display. To complete the cycle, choose one of the following options:
Draining and spin:
- Press the START/PAUSE button. The machine
will drain the water, then spin the laundry at the maximum speed provided for the selected programme.
6
- Select spin speed by means of button 5, and press
2.05
---
the START/PAUSE button.
Drain only
- Press the SKIP/RESET button once, so as to cause
the DRAIN light to light up, then press the START/PAUSE button.
Important! If you accidentally press the SKIP/RESET
button more than once, the display will show three blinking dashes. To cause the washing machine to drain the water, select any washing programme by means of the FABRIC button, then press SKIP/RESET three times in order to select the DRAIN position (only the DRAIN light will remain lit). The RINSE HOLD option cannot be selected for the automatic WASHING & DRYING programme.
6 OPTIONS button
Press this button to select the following options:
PREWASH: select this option if you wish your laundry to be prewashed before the main wash (not
available for wool and hand-wash cycle).
The prewash ends with a short spin at 650 rpm in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained.
EXTRA RINSE: this option can be selected with all programmes except the wool programme and hand wash. The machine performs 4 rinses instead of 3. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft.
QUICK WASH: select this option for laundry that is only slightly soiled (not for wool and HAND WASH programme). The washing time will be reduced according to the type of fabric and the selected temperature.
The PREWASH and QUICK WASH options cannot be selected together.
8 DRYING TIME button
By depressing this button you can select a timed programme for cotton or synthetics, the relevant light illuminates. To select “cottons” you have to push the button for about 2 seconds. To select the drying time push the button until the time you want appears in the display according to the fabrics (cotton or synthetics) you have to dry.
- For COTTON you can select a drying time from 10 minutes to 2 hours and 10 minutes (
- For SYNTHETICS you can select a drying time from 10 minutes to 1 hours and 40 minutes (
Every time you press the button the time increases, by 5 mins.
2.10).
1.40).
9 Display
The following pieces of information are shown on the display:
Three blinking dashes, when a programme is cancelled by means of the SKIP/RESET button.
The three blinking dashes will also appear when you press the ON/OFF button to switch the machine on, if the previously selected cycle has been erased.
Duration of washing programme in hours
and minutes, after you have selected a programme.
7 AUTO DRY button
This button allows you to choose the required degree of drying for cottons and synthetics:
- Extra dry (only for cottons)
- Store dry (cottons and synthetics)
- Iron dry (only for cotton)
The drying time is automatically adjusted by the machine: the laundry will be dried to the selected degree of dryness.
While the programme is running (after you have
pressed the START/PAUSE button), the displayed time value decreases by one unit every minute.
7
Selected drying time in minutes or hours and
0
1.25
E20
minutes.
After the programme has started the time remaining is
updated every minute.
The washing machine has stopped with water in the tub, at the end of a programme with the RINSE HOLD option: this is indicated by a static zero.
The washing machine has completed the programme: this is indicated by a blinking zero. At the same time, the door locked light goes out. The zero will reappear when you switch the washing machine on, unless the previous programme has been erased by means of the SKIP RESET button.
The delay time is displayed for 3 seconds, then the duration of the selected programme reappears. After you have pressed the START/PAUSE button, the countdown begins, and the delay time value decreases by one unit every hour. You can delay the start of the selected programme by up to 24 hours in one hour intervals.
An incorrect option selection has been made: this is indicated by the message Err when a function incompatible with the current programme is selected.
The incorrect selection is also indicated by an audible warning signal.
An alarm code indicates a fault in the machine operation (see the relevant chapter on page 23-24).
Important!
The first time you use the washing machine, when
you switch it on, it may display a blinking zero and give an audible warning signal. This is due to the fact that the washing machine has performed a washing cycle during the manufacturer’s inspection tests, and this cycle has not been erased after its completion.
Delay start, a time value indicated in hours and
selected by means of the relevant button.
10 START/PAUSE button
This button has three functions:
Start: after you have selected the desired programme
and options, press this button to start the machine. The light above the button will stop flashing and remain lit.
If you have selected a delay time by means of button 12, the countdown will begin and will be shown on the display.
Pause: when you press this button again, the
programme in progress is interrupted. The light above the button will start flashing. To restart the programme, press the button again.
8
When you PAUSE the cycle, the DOOR LOCKED
PREWASH
WASH
SPIN
RINSES
DRAIN
DRYING
S
T
A
R
T
/
P
A
U
S
E
light goes out, and it becomes possible to open the door, provided
• the machine is not in the heating or drying phase;
• the level of the water is not high;
• the drum is not turning.
Important! You must set the washing machine to PAUSE before you make any change in the programme in progress.
Draining of water and spinning after the execution
of programmes with the RINSE HOLD option.
11 SKIP/RESET button
This button performs two functions:
- Clears the memory
- Selects special programmes
At the end of every programme the RESET button must be pressed once or repeatedly to clear the programme memory. This will be confirmed by three dashes, flashing in the display. If the previous programme is not cleared, the display will show a “ sound, when you switch the machine on.
Selecting a special programme:
A wash programme must be selected in the normal way. (START button not pressed)
0” flashing and an audible signal will
To select rinse & spin, press the SKIP button once, the wash LED goes out.
To select spin only, press the SKIP button twice. The wash & rinse LED,s go out.
To select Drain press the SKIP button three times, the wash - rinse - spin LED,s go out.
A normal wash cycle consists of the following phases, Wash - Rinses - Spin and is confirmed by the illumination of the corresponding LED,s.
If you wish to cancel or advance the running programme to the required phase, PAUSE the cycle and then press the SKIP button as previously described.
9
12 DELAY button
This button makes it possible to delay the starting of the programme by up to 24 hours. The delay you have selected is shown on the display for about 3 seconds; afterwards, the duration of the programme reappears. You must select this option after you have set the programme and before you press the START/PAUSE button.
The time value shown on the display will decrease by one unit every hour.
You can change the delay time at any moment, before you press the START/PAUSE button.
If you have already pressed the START/PAUSE button, and you wish to change or cancel the delay time, proceed as follows:
• set the machine to PAUSE by pressing the START/PAUSE button;
• press the DELAY button until the display shows the desired delay time or
• press the DELAY button once, to erase the delay time. The display will indicate “
• press the START/PAUSE button again.
Important!
The door will be locked throughout the delay time (DOOR LOCKED light lit). If you need to open the door, you must first set the machine to PAUSE by pressing the START/PAUSE button. After you have closed the door, press the START/PAUSE button again.
0 h”.
13 Programme phase indicator
lights
When you select a programme, the lights relevant to the phases that form the programme light up.
After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.
10
Loading...
+ 22 hidden pages