Zanussi 132301, TL1810SXP, 132306, TL1410SXP, 132307 User Manual
...
RANGE
COMPOSITION
The range consists of 4 models of
work tables with upstand and a bowl
positioned on the right or left hand
side, 1400 or 1800 mm in length.
The highly modular design of the
tables guarantees a rational solution
to any food preparation or support
function in the professional kitchen.
Upstand with 8 mm radioused
corner, 100 mm high and 13 mm
deep, designed to be used against a
wall.
Model 132200+855300
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� The 40 mm high worktop in 304
AISI stainless steel, 10/10 in
thickness, incorporates a layer of
sound deadening material, has
upturned edges to protect the
kitchen worker and a reinforced,
waterproof under panel.
� Square section legs and 1"
height-adjustable feet (40 mm) in
304 AISI stainless steel to allow
perfect alignment with other food
preparation equipment.
� The single-pressed bowl (400 x
400 x 200 mm) is supplied as
standard with an overflow pipe and
drain hole.
� Ease and speed of installation
guaranteed by the fact that the table
top slots into the legs without using
screws.
� All work tables can be fitted, as
optional extras, with a single drawer
either 400 or 600 mm wide, a chest
of 4 drawers either 400 or 600 mm
1400&1800 mm
WORK TABLES WITH BOWL
wide, a lower shelf, a three sided
underframe and a set of castors as
an alternative to the feet. Different
taps are avialable to suit every need.
� The drawers, in 304 AISI stainless
steel with a one-piece interior and
rounded corners for greater hygiene
and ease of cleaning, are designed
to contain GN containers with a
maximum height of 100 mm. They
have a maximum load capacity of 40
kg.
� The lower shelf, 40 mm in
thickness, slots easily into place,
without the use of tools, at a height
TECHNICAL DATA
CHARACTERISTICS MODELS
TL1410DXP
External dimensions - mm
width 1400 1400 1800 1800
depth 700 700 700 700
height 1000 1000 1000 1000
Worktop thickness - mm 50 50 50 50
Upstand dimensions - mm
height 100 100 100 100
depth 13 13 13 13
radius R=8 R=8 R=8 R=8
Bowls - n. 1 1 1 1
Bowl dimensions (wxdxh) - mm 400x400xH200 400x400xH200 400x400xH200 400x400xH200
Net weight - kg. 45 45 54 54
of 200 mm from the floor. Smooth
shelves are normally supplied,
perforated ones are available on
request. For installation of the chest
of drawers the lower shelf must be
ordered as well.
� All models comply with the more
strict international standards as far
as hygiene and cleanability are
concerned.
132300
TL1410SXP
132301
ZANUSSI
P R O F E S S I O N A L
TL1810DXP
132306
TL1810SXP
132307
132300
132301
1400
40
560
400120
260
200
\U+220530
12
1800
440
12
400 120
200
700
100
540
50
40
900
440
400120
1400
200
\U+220530
12
260
12
400120
132306
700
100
40
560
540
50
40
900
1800
200
700
100
40
560
50
40
900
540
132307
700
100
40
560
50
40
900
540
440
\U+220530
12
260
400120
12
400120
260
\U+220530
12
440
12
400120
400 120
LEGEND
TL1410DXP
132300
TL1410SXP
132301
TL1810DXP
132306
TL1810SXP
132307
A - Hot water inlet 3/4" 3/4" 3/4" 3/4"
B - Cold water inlet 3/4" 3/4" 3/4" 3/4"
C - Water drain 1"1/2 1"1/2 1"1/2 1"1/2
OPTIONAL ACCESSORIES
ACCESSORIES MODELS
3-SIDED UNDERFRAME FOR 1400 MM TABLES 855044 855044
3-SIDED UNDERFRAME FOR 1800 MM TABLES 855048 855048
CHEST 4 DRAWERS (S/S RUNNERS) 600 MM 855813 855813 855813 855813
CHEST 4 DRAWERS(S/S RUNNERS) GN1/1 400MM 855812 855812 855812 855812
DRAWER (GALVANIZED RUNNERS) 600 MM 855903 855903 855903 855903
DRAWER (GALVANIZED RUNNERS) GN 1/1 400MM 855902 855902 855902 855902
DRAWER (S/S RUNNERS) 600 MM 855811 855811 855811 855811
DRAWER (S/S RUNNERS) GN 1/1 400 MM 855810 855810 855810 855810
ELBOW OP.MIX.TAP+SHORT SPOUT-3/4" HOLE 855323 855323 855323 855323
FOOT OP.MIXER TAP(HOT+COLD)+SPOUT-3/4" 855328 855328 855328 855328
LOWER SHELF FOR 1400 MM TABLES 855014 855014
LOWER SHELF FOR 1800 MM TABLES 855018 855018
MIXER TAP W/FOOT PEDAL FOR SINKS ON LEGS 855317 855317 855317 855317
MIXER TAP WITH SPOUT 3/4" SINGLE HOLE 855319 855319 855319 855319
MIXER TAP(INFRARED)+SPOUT 3/4"SING.HOLE 855325 855325 855325 855325
MIXER TAP(PREMIUM)+SPRAY ARM-3/4" HOLE 855326 855326 855326 855326
PRE-WASH SPRAY UNIT,SINGLE HOLE 855315 855315 855315 855315
SINGLE BRASS DRAIN SYPHON 1,5" 855308 855308 855308 855308
SINGLE PLASTIC DRAIN SYPHON 1,5" 855306 855306 855306 855306
WALL MIXER TAP WITH SWIVEL SPOUT 3/4" 855310 855310 855310 855310
TL1410DXP
132300
TL1410SXP
132301
TL1810DXP
132306
TL1810SXP
132307
ZANUSSI
P R O F E S S I O N A L
www.zanussiprofessional.com
AAAD1 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.
Loading...