Zanussi fls473c, fls673c USER MANUAL
LAVADORAS
AUTOMATICAS
MÁQUINAS DE
LAVAR A ROUPA
WASHING
MACHINES
FLS 473 C
FLS 573 C
FLS 673 C
INSTRUCCIONES
MANUAL DE INSTRUÇÕES
INSTRUCTIONS
35.292.557/2
39
CONTENTS
Warnings 40
Technical specifications 41
Installation 42
Transit security bars 42
Lavelling 43
Hidraulic connection 43
Electrical connection 44
Your washing machine 45
Description of the controls 46
Operating sequence 47
Programs 49
Washing hints 51
Table of symbols 52
Maintenance 53
Servicing 55
About the symbols
The following symbols will guide you in the reading of this
instruction book.
Important information concerning the safety in
the use of your machine
Information for correct use of your machine
and to obtain the best performance
Important information concerning environment
protection
Our contribution to the protection of the
environment:
We use recycled paper.
i
40
THESE WARNINGS ARE PROVIDED IN THE
INTEREST OF SAFETY. YOU MUST READ
THEM CAREFULLY BEFORE INSTALLING OR
USING THE APPLIANCE.
It is most important that this instruction book
should always be at hand for the user for
reference. Should the appliance be sold or
transferred to another owner, or should you move
house and leave the appliance, always ensure
that the book is left with the appliance in order that
the new owner can get to know the functioning of
the appliance and the relevant warnings.
CHECK THE APPLIANCE UPON RECEPTION
AND SHOULD ANY DAMAGE BE OBSERVED
CALL YOUR DISTRIBUTER BEFORE YOU
MAKE IT WORK.
Children must not be allowed to temper with
the controls or play with the product.
The appliance is heavy. Care should be taken
when moving it. Do NOT hold yourself on the
controls.
All packing and transit bolts must be removed
before use.
Serious damage can occur to the product and
to property if this has not been adhered to. See
relevant section (unpacking) in the instruction
booklet.
The washing machine must be unplugged
when removing the interior transit bolts. Do not
plug the appliance before finishing the removal
of the transit bolts and the fixing of the caps in
the holes where the security bolts were.
If the appliance is to stand on a carpeted floor
make sure that there is space between the
carpet and the supporting feet of the appliance
for the air to circulate freely around.
Any electrical and/or plumbing work required
to install this appliance should be carried out by
a qualified electrician and/or plumber or
competent person.
It is dangerous to alter the the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the
appliance dos not stand on the electrical
supply cable.
Only wash fabrics which are designed to be
machine washed. If in doubt, consult the
manufacturer of that item.
Before washing ensure that all pockets are
empty and buttons and zips are fastened.
Any objects such as coins, safety pins, nails,
screws, stones or any other hard, sharp
material can cause extensive damage and
must not be placed into the appliance nor left in
the pockets.
Avoid washing frayed or torn articles and treat
stains such as paint, ink, rust, and grease
before washing.
Garments which have been in contact with
volatile petroleum products should not be
machine washed. If volatile cleaning fluids are
used, care should be taken to ensure that the
garement is dry before placing in the washing
machine.
Wash small items such as socks, laces,
washable belts , etc. in a washing bag or pillow
case as it is possible for such items to slip
down between the tub and the inner drum.
Only wash the advised quantity of delicate
fabrics. Damage to the fabric can ensue if you
over-fill. Refer to the manufacturer’s
recommendations of quantities.
Do not overload the appliance, see the relevant
WASHING PROGRAM section .
Pets have been known to climb into washing
machines. Please check your drum before use.
The glass door becomes very hot during the
wash cycle. Keep children away from the
appliance whilst it is in operation.
Before opening the door look through the
“window” to check if the water has been
drained. Should there be water do not open
before draining. If in doubt read section
“INSTRUCTIONS FOR USE”.
Always unplug the appliance and turn off the
water after use.
Leave the porthole slightly ajar between
washes to preserve the door seal.
Unplug the appliance before cleaning.
This product must be serviced by an
authorised Service Centre, and only genuine
spare parts should be used. Do not try to repair
the appliance yourself.
Repairs carried out by inexperienced persons
may cause injury or serious malfunctioning of
the machine. Contact your local Service
Centre. Always insist on genuine spare parts.
WARNINGS
41
DIMENSIONS Width 60 cm
Height 85 cm
Depth 55 cm
ELECTRICAL CONNECTION Voltage 220...230 V 50Hz
Max.Power
Absorbed 2200 W(10A)
WATER PRESSURE Minimum 5N/cm
2
Maximum 80N/cm
2
MAXIMUM RECOMMENDED LOAD Cotton, Linen 4,5 kg
Synthetics delicate fabrics 2 kg
Wool 1 kg
SPIN SPEED Maximum Mod. FLS 473 C 400 r.p.m.
Mod. FLS 573 C 500 r.p.m.
Mod. FLS 673 C 600 r.p.m.
TECHNICAL SPECIFICATIONS
This appliance marked “CE” complies with the directives:
-89/336/CEE on electro magnetic compatibility.
-73/23/CEE on electric material designed to be used with certain power limits.
i
42
Transit security bars
Before starting the machine up, the transport
security bars must be removed as follows:
You are advised to keep all the transport security
bars in case the appliance has to be transported
again.
Unscrew and remove the three rear screws by
means of a key.
Lean the appliance back on the rear and fit one
of the polystyrene angles between the appliance
and the floor.
Make sure the hoses are not squashed.
arefully remove the plastic bags on the right and
the left, pulling them to the centre of the
appliance.
Place the machine in an upright position and
remove the three plastic bolts. (Fig. 4).
Plug the 3 holes with the plastic plugs which you
can find in the envelope containing the
instruction booklet. (Fig. 5).
P0287
P0018
AL009
2
1
P0001
P0002
Fig. 4 Fig. 5
Installation
Loading...